COMMUNICATION INFOTECH. MICROWAVE INSTALLATION Check on the power outlet box before beginning the installation to insure that outlet box is properly grounded.

Slides:

Advertisements

Similar presentations

Advertisements

4 Wiring Systems. 4 Wiring Systems Objectives Know where to find codes and authorities for an installation. Recognize the marks of the most popular.

The York College Radio Telescope Ian OLeary, Tim Paglione, & Waynewright Joseph (York College, CUNY) Introduction Radio telescopes allow us to observe.

Network Design Issues Design and Documentation Prepared by: Aline L. Mendoza.

Confidential and proprietary materials for authorized Verizon personnel and outside agencies only. Use, disclosure or distribution of this material is.

TWO (2) Installation principles 1. Cabinets need to be installed straight, plumb, and level. 2. The area you are working in is rarely straight, plumb,

Place AS-2259 Antenna into Service

Installation. Indoor Unit Installation Typical Installation.

1 High Frequency Radio Team (HFRT) Skill Level 1 Place Longwire Antenna into Service.

Electrical Wiring Circuit Board Project. STEP 1 - Identify all Parts of the Project Saw Drill Driver w/ bits Drill w/bits (not pictured) #2 Phillips Screwdriver.

PH0101 Unit 2 Lecture 4 Wave guide Basic features

Functional Area 3: ProPortable Module 3.5 ProPortable Safety and Maintenance.

Parabolic Dish Antennas. An Antenna is : An An effective interface between the radio and free space: Radio Antenna Free space a For Terrestrial Communications,

2001 APCO/NENA State Training Conference January 19, 2001.

SIW 2003 The antenna element Ravi ATNF, Narrabri 1.The role of the antenna in a Fourier synthesis radio telescope 2.The Compact array antenna.

Based on Cisco Wireless Material

Installation. Indoor Unit Installation Typical Installation.

ESTeem Training Class Antenna Fundamentals. Decibels (dB) Used for all mathematical calculations in the radio world. – dB is a logarithmic number dB =10.

TP4-ENERSOL-TD/PV double function

Design Considerations for Telecommunications Pathways and Spaces

Confidential and proprietary materials for authorized Verizon personnel and outside agencies only. Use, disclosure or distribution of this material is.

Everything your parents never told you about antennas Johan Führi Design Engineer Poynting Antennas, South Africa MUM, Poland 2008.

1 Business Development (Service).  Select location for Reflector Installation with clear view of Satellite (Line Of Sight)  There should not be.

PLAN #PartProcessTools and equipmentQuality controlSafety *Aprons must be worn is ALL stages of manufacture Tim e 1 MDF base Mark out on MDF piece Pencil,

Terrestrial Microwave TK2133 A Lee Hau Sem A Lai Horng Meau.

1 Business Development (Service). What is DTH How DTH works How DTH works Type of DTH Connections Type of DTH Connections Advantages of DTH Advantages.

1 Lecture Network Media Media refers to the means used to link a network's nodes together communications channel is the transmission media on which.

Learning, our way Examples of bad installation. CONTENT Installation related examples Installation related examples Application related examples Application.

E8 / PPA Solar PV Design Implementation O&M Marshall Islands March 31-April 11, Field investigation Installation site confirmation Roof-mounted.

FAA/NASA Joint University Program for Air Transportation Research Jeff Dickman Chris Bartone June 20, 2003 A New Anechoic Chamber for Nearfield Antenna.

Planning Manufacture TaskEquipmentQC/QA Mark out the shape of the speaker front and back Tri square, pencil, ruler, tape measure.

Wireless# Guide to Wireless Communications

Lifting Operations & Lifting Equipment. LOLER 98  Lifting Equipment must be of adequate strength & stability, as must the load itself  Lifting equipment.

Antenna Concepts © 2001, Cisco Aironet Systems, Inc. Chapter5-1.

Building Your LPFM Station Presented by John George.

Site Construction & Installation Services

Author: Bill Buchanan Wireless LAN Unit 6 Radio and RF Wireless LAN Unit 6 Radio and RF.

A Damper for every Duct! Young Regulator Product Line Think Young!

COMMUNICATION INFOTECH. BTS COMMISSIONING Switch of the bts cabinet & disconnect a bts connectors from DDF before offline start Disconnect the bts connection.

SAFETY. Safety Building and operating a “ham” radio station is a perfectly safe pastime However, carelessness can lead to severe injury, burns, or even.

Safety in the Machine Shop Session 1. Shop Tools and Techniques2.

Facts About the Energy Industry  By 2015, 35 percent of the workforce (approximately 200,000 high-skill, high- wage workers) may need to be replaced.

Chapter 3 Antenna Types Part 1.

Gates automation. Summary  Choosing the appropriate model  Faac Product Range (Sliding Gates)

Antenna II LN09_Antenna Measurements 1 /10 Antenna Measurements.

ELECTRIC VEHICLE PROJECT CAR BUILDING PROCEDURES BY: PIERRE PEASHA CENTENNIAL HIGH SCHOOL BAKERSFIELD, CA.

Building from Templates. The Concept First things first: In the beginning was the idea. For example, “I need a coffee table, something unique but functional.”

Suggestion for installation Demolish and destroy the old air condition, then send them to owner building Install a new one by last main.

Office Management project on Transmission Medium.

Carpentry & Joinery Diploma Level 1 Flash Cards.

INSTALLATION MANUAL FATL Machine Installing: ACTIVITY CHECK POINT 1. Minimum two persons required for opening the Machine. 2. Cut the straps & tape. 3.

CRTNT testing equipments introduction

Community Antenna TV System:

Dr. Hesham M. ELBADAWY, NTI, Egypt

Electrical Wiring Circuit Board Project

ANTENNA MEASUREMENTS Measurement of Radiation Pattern Gain

McEvoy and Langston inc

Redundancy Switching Components

Module 6 Antenna Assembly and Look up Angles

Diffraction and Resolution

Horizontal Installation Overview

Diffraction and Resolution

CHAPTER 16 SAFETY.

Countertop Renovation

Terrestrial Microwave

Terrestrial Microwave

Omega Selection Center

Presentation transcript:

COMMUNICATION INFOTECH

MICROWAVE INSTALLATION Check on the power outlet box before beginning the installation to insure that outlet box is properly grounded.

TOOLS REQUIRED FOR INSTALLATION o PENCIL o TAPE MEASURE & STRAIGHT EDGE o CUTTING DAMPER o CUT THE TAMPLATE o ELECTRIC DRIL WITH 3/16, ½, & 5/8 DRIL BITS o FILLER BLOCKS o GLOVES o SAW o HAMMER o SAFETY GOGGLES o DUCT & MASKING TAPE

INSTALLATION OF MICROWAVE Varry that space between the cabinets is 30 cm wide & free the obstruction. 1 st step determining the size of location where the mw will be mounted, mark the pencil. The most difficult part as the installation process electrical or vent work that may be required, depending on the type of microwave.

Scope of Work Receipt the site information from customer will TND Material reception at the sides & checking as per packing list. Hosting of GSM/CDMA antennas on tower as per TND. Routing of RF cable from the shelter to Anteena Grounding the Anteena & RF cables at appropriate place. Installation of Indor JUPers Switching equipment Power measurement

OUTDOOR Fixining of horizontal cable array Fixing of RF antenna & microwave antenna Clamping & routing of cables Grounding Allignment of antenna as per specification

INDOOR Installation of radio base station(RBS) Installation of TRx rack Installation & commissioning & Tx equipment Fixing of cable array Grounding equipment

INSTALLATION INSTRUCTION FOR MICROWAVE(MW) PARABOLIC ANTEENA 2.4M (8ft) Reflector 2.8 m Wave guide feed signal or dual polarized Pipe mount for installation on pipe 115mm Antena offset to the left or the right Safety collar for easy installation 2 spindles for fine adjustment of azimuth & elevation of +5deg & -5deg

One sway bare Reflector with shroud, shroud aperture covered by high performance

TOOLS REQUIRED FOR INSTALLATION Hoisting device for 4000N Shackl 2 ropes Water balance & compass