Programming 27x Optical 10x Digital Zoom Day/Night Camera Prosecutor Day / Night Windshield Mount Camera.

Slides:



Advertisements
Similar presentations
Tandberg Basic Operating Guide Classic Systems Collaborative Services Education Technology Services The School Board of Broward County, Florida.
Advertisements

Available in Black and Silver The all-in-one camera.
Fixed Analogue Cameras
Chapter Six Digital Photography Foundations (How to use the various settings on your digital camera)
Set the Camera Options  Resolution  Focus  Exposure  Zoom  Flash  Self-Timer/Remote Control.
An Idiot’s Guide to Exposure a.k.a. John’s Guide to Exposure.
600TV Lines 3D-DNR HSBLC Advanced WDR 600TV Lines 3D-DNR HSBLC Advanced WDR High Resolution Image. 3 Dimension-Digital Highlight Suppress Wide Dynamic.
Quick Operation Guide System Controller WV-CU650 Main Functions (1) WV-CU650 Start Up Login 1. Turn on the power and wait for the Login standby display.
Journey Through a Camera
CAMERA MODULE & BOARD. ■ DNR (Digital Noise Reduction) By using the DSP chip applied to the DNR technology, the amount of low illuminance noise has been.
H x Outdoor Speed Dome IP Camera
VIDEO/DC ↔ ELC All Menu value reset Return Camera default all value INIT & RESET State ICON display enable (1minute)‏1MIN ↔ OFF STATE DISPLAY Lens type.
APPROVAL SHEET DESCRIPTION : 16 X CCD COLOR CAMERA SET MODEL NO. : ONZ - AN101 /151/102/152 ( NTSC) ONZ - AP101 /151/102/152 ( PAL ) ISSUED CHECKED APPROVED.
Large Cameras Microphones – Plug in at top of camera – Put microphones away when finished Set camera to “Camera” 1.Audio Button should be on Channel 1.
Just Say “NO” to Your Auto Setting! MANUAL CAMERA SETTINGS.
OSD MANUAL FOR 700TVL CAMERA. ■ LENS You can select AUTO or MANUAL mode, depending on the connected lens type. AUTO(TYPE, MODE, SPEED) : Select Auto Iris.
Camera Remote Control Unit (AK-HRP150) Camera remote control unit AK-HRP150 is a camera controller for multi-purpose camera AK- HC900, AK-HC910 and AK-HC1500,
Digital-watchdog.com 2.1 & 5MP Network Cameras A-1 Alarm Protection Product Overview Rev : 01/15.
Digital Cameras. Image Capture  Images are captured by the image sensor, then stored in the camera in a memory device.  Sensors convert light into an.
APPROVAL SHEET ISSUED CHECKED APPROVED DATE : 31. May. ‘01 REVISION No. 1.0 MESSRS. Receipt Stamp C&B Technology Inc. DESCRIPTION : CCD Color Board Camera.
Lee Elliott Dec04. The New TK- WD310E(A) 1/3" digital image device with Wide Dynamic Range (WDR) Innovative 14-bit DSP High-speed, automatic 5-level exposure.
Sales Guide of DCS-6815(18X) DCS-6817(30X) DCS-6818(36X) High Speed Dome Network Camera.
Z.B.M Address: 3 Yanai Jerusalem P.O.B: Jerusalem Telephone: Fax:
Camera Basics Intro to TV Production. It’s like riding a bike… You can learn to operate a camera only by doing it.
Confidentiel –Usage interne Presentation RayCAm CA 1884.
The Sony Mavica Digital Camera “The Computer as an Educational Tool: Productivity and Problem Solving” ©Richard C. Forcier and Don E. Descy.
Inside the Digital Camera. Types of Digital Cameras Pocket CameraRangefinder SLR Like DSLR.
Multifunctional LCD Panel HDL-MPL8.48. LCD Panel Description The HDL-MPL8.48 series is a new generation of wall mounted switch, with a total of 8 metal.
1 Lilin Camera Presentation PIH-4048 PIH-4028 PIH-8198 PIH-8158 PIH-8088 PIH-8048 PIH-8028 PIH-8178 Lilin Digital Super Low Lux Color Camera Super.
AM-H676ER H.264 IP Speed Dome Camera Product Key Features: H.264 Main Level 3 Compression 960H 928*576 30fps PAL/NTSC 30fps ¼” SONY Super HAD.
AM-H676 H.264 IP Speed Dome Camera H.264 IP Speed Dome Camera Product Key Features: H.264 Main Level 3 Compression 960H 928*576 30fps ¼” SONY.
Spring Hill Assembly1 InnoSys Park Brake Tool Master Control Panel Screens 1 3-Mar-2008.
FEATURES USER’S MANUAL COLOR BOX CAMERA SDB-BAW SDB-BAW/T 1/3 " SONY 960H Dual Scan CCD High Resolution of 800TV Lines Min. Illumination of Lux at.
Quality Enhancement Video Quality. Introduction ● This section will bring you through the following concepts: 1. How lighting and camera positioning enhance.
HD-SDI PTZ Speed Dome Camera  2.0 Mega-Pixel Resolution PTZ  X160 Zoom Control (Optical X20 / Digital X8)  True Day & Night with.
All Freezer Advance. When the Freezer is first supplied with power or if a power outage occurs, the display will indicate this by flashing the temperature.
Digital-watchdog.com Rev : 01/15 Megapixel Analog Cameras Presentor’s Name Title| DWC-D3661TIR DWC-B5661TIR DWC-V5661T.
All rights reserved by Cynix, Inc. 1MAR. 2, 2009 Product Specification.
1 Cinematography Videography An Overview 2 Cinematography Means literally: “ Writing in Movement” A better term than videography?
EverFocus IP Camera Image Adjustment GTS. Agenda 1. Cameras response to day and night modes (day-night- Auto) 2. Levels of IR led when to be activated.
Iris Control SDI-DC212IRV HD-SDI IR DOME CAMERA USER’S MANUAL FEATURES SPECIFICATIONS MEMO 1/3” 2.1Megapixel Progressive Panasonic CMOS
HD-SDI COLOR IR LED CAMERA
HD-SDI DOME CAMERA SDI-DC221 SPECIFICATIONS MEMO USER’S MANUAL
V2867NVD 100mm Vandal-Resistant Dome Camera Features ACCESSORY
960H(700 TVL) PTZ Speed Dome Camera (X28E with WDR)
Night Scout TVI (30X HD-TVI IR PTZ)
HD-SDI IR BULLET CAMERA
VCQ-F/P332WN/WP COLOR MINIATURE CAMERA Features Specifications
COLOR DOME CAMERA SDD-D425V SPECIFICATIONS MEMO USER’S MANUAL FEATURES
HD-SDI IR HOUSING CAMERA
Shooting Modes Manual Aperture Shutter Program Auto Portrait Landscape
HD-SDI White LED Ball Camera
TK-T8101WPR New line with True Day/Night and built-in IR LED Camera
HD-SDI COLOR IR LED CAMERA
Using a Camera.
DOME OUTDOOR ADVANCED IR LED DOME CAMERA ADVANCED IR BULLET CAMERA
OUTDOOR OUTDOOR ADVANCED IR LED OUTDOOR CAMERA
Sales Guide of DCS-6815(18X) DCS-6817(30X) DCS-6818(36X)
BULLET OUTDOOR ADVANCED IR LED BULLET CAMERA ADVANCED IR BULLET CAMERA
HCV-HD 1.0MP AHD Camera Features:
Refining the Quality of your Photographs.
(super) quick DSLR Camera guide
OUTDOOR OUTDOOR ADVANCED IR LED OUTDOOR CAMERA
HD-SDI IR BULLET CAMERA
OUTDOOR OUTDOOR ADVANCED IR LED OUTDOOR CAMERA
20 camera parts of the Canon Rebel T3i
DOME OUTDOOR ADVANCED IR LED DOME CAMERA ADVANCED IR BULLET CAMERA
TVI 2MP BULLET CAMERA TVI 2MP/5MP PIR CAMERA
EX-SDI 2.0 ADVANCED IR LED DOME CAMERA 1/2.8 inch SONY CMOS (IMX-291)
Presentation transcript:

Programming 27x Optical 10x Digital Zoom Day/Night Camera Prosecutor Day / Night Windshield Mount Camera

Prosecutor Day / Night Camera Specifications 1. OSD(On Screen Display ) FORMAT ) DESCRIPTION 1 OSD FormatDESCRIPTIONREMARKS 2 FUNCTION Focus Mode Non display ☞ Auto Mode Manual / Push Auto Mode Back Light Back Light OFF BLC ON / Auto BLC Mode 3 Shutter Speed Normal Shutter ( NTSC:1 / 60 PAL:1 / 50 ) 1 / / variable steps. 1) OSD DISPLAY POSITION Non display 2 / “BL” display Flickerless Mode “Ff” display

Prosecutor Day / Night Camera Specifications 4WBC MODE Non Display White Balance AUTO SWB Special Auto White Balance ; Adjustment Mode according to change of external illuminant. RED ADJUST and BLUE ADJUST ( 0 ∼ 255 ) are available. After changing R/B value, The maintenance mode is “ AUTO”. WB Preset for INDOOR WB Preset for OUTDOOR Manual WB Adjustment ; In manual mode the HUE control is available ( 0 ~ 99 ). Push Auto White Balance ; Turn this mode ON, the white trace automatically.turn this mode OFF, Preserve the white of final auto tracing action ( Manual ). 10STAND-BY MODE STAND-BY Indicate the camera stand-by during the camera’s power turning ON. 8ZOOM DISPLAY DX 176 7CAMERA ID According to write the identification number to each camera, Multi-point control is available (PC Control ) ( 000 ∼ 255 ). OSD FormatDESCRIPTIONREMARKSFUNCTION 3 / 17 PWB X 22 Digital Zoom mode Optical l Zoom mode 6Motion Detect MOTION DETECTED Motion DET ON mode W M

Prosecutor Day / Night Camera Specifications 2. MENU DESCRIPTIONS 1) MAIN MENU MENU CAM ID OFF FOCUS SET AWB SET AE SET SPECIAL SET MOTION DET F OSD DISP E SENSITIVE WDR EXIT 2) Set Up the Menu a) In order to display the MENU on the screen, Set the Menu commend or use Menu mode in Demo. program. b) To select each item, Zoom TELE and WIDE commend or key panel is used for UP and DOWN. To change the data or set to ENTER, Focus FAR and NEAR commend or key panel is used. 4 / 17

Prosecutor Day / Night Camera Specifications 3) SUB MENU DESCRIPTIONS 5 / 17 CAM ID ; To connect a large number of camera, It can be assigned to identification number to each camera for camera control easily ( 000 ~ 255 : total numbers of ID are 256 ). * It only can be set this function using ID commend. To transfer ID Code of camera, In first byte at PC control. Set the ID number of camera, And then the ID number display continuously. MENU1 CAM ID OFF. MENU1 CAM ID 1. (1) CAM ID MENU. FOCUS SET. FOCUS SET FOCUS MODE Auto. (2) FOCUS SET FOCUS SET FOCUS MODE Push Auto. FOCUS SET FOCUS MODE Manual. FOCUS SET. FOCUS DIST 50cm. 2.1 Focus Mode Set : This function is for focus mode setting A) Set up “FOCUS SET” in main menu using Protocol command or Demo. Soft ware. Select the “FOCUS MODE” in submenu. Using Tele/wide Command, and then set the mode “ auto, push auto, manual. FOCUS SET. FOCUS DIST 10cm. FOCUS SET. FOCUS DIST 5M. A) Select the “FOCUS DIST ” in submenu. Using Tele/wide Command, B) Set the focus distance mode from 1cm to 5M. 2.2 Focus Distance Set : This function is for selection of minimum shooting distance.

Prosecutor Day / Night Camera Specifications FOCUS SET. ZOOM START X1. A) Select the “ZOOM START ” in submenu. Using Tele/wide Command, B) Set the Zoom start mode from x1 to x ZOOM START Set : This function is for selection of zoom start position. FOCUS SET. ZOOM START X16. FOCUS SET. ZOOM START X21. FOCUS SET. ZOOM END X176. A) Select the “ZOOM END ” in submenu. Using Tele/wide Command, B) Set the Zoom end mode from x176 to x ZOOM END Set : This function is for selection of zoom end position. FOCUS SET. ZOOM END X22. FOCUS SET. ZOOM END X18. FOCUS SET. ZOOM SPEED SLOW. A) Select the “ZOOM SPEED ” in submenu. Using Tele/wide Command, B) Set the Zoom speed, slow, middle, quick. 2.5 ZOOM SPEED Set : This function is for selection of zoom speed. FOCUS SET. ZOOM SPEED MIDDLE. FOCUS SET. ZOOM SPEED QUICK. FOCUS SET. ZTRK MODE ON. A) Select the “ZTRK” in submenu. Using Tele/wide Command, B) Set the Zoom tracking mode to ON or OFF. * Zoom tracking means focused zooming state. 2.6 ZOOM TRACKING MODE Set : This function is for selection of zoom tracking mode. FOCUS SET. ZTRK MODE OFF. 6 / 17

Prosecutor Day / Night Camera Specifications FOCUS SET. INITIAL SET ON. A) Select the “ININTIAL SET ” in submenu. Using Tele/wide Command, B) Set the initial set mode to ON or OFF Using Near/Far Command 2.7 INITIAL SET : If initial mode set to ON, All AWB function is changed to the factory setting. FOCUS SET. INITIAL SET OFF. FOCUS SET. RETURN A) Select the “RETURN ” in submenu. Using Tele/wide Command, B) Set the return mode Using Near/Far Command 2.8 RETURN TO MAIN MENU : This function is exit to main menu. MENU. AWB SET. AWB SET WB MODE Auto. (3) AWB SET 3.1 WB Mode Set : This function is for changing the WB mode. A) Set up “AWB SET” in main menu using Protocol command or Demo. Soft ware. B) Select the “WB MODE” in submenu. Using Tele/wide Command, C) Set the mode auto, push auto, manual outdoor, indoor, special or auto using Near/Far Command. AWB SET WB MODE Push Auto. AWB SET WB MODE Manual. *WBC MODE ; Use for changing White Balance Mode. 1) AUTO ; WB Range 2800 。 K ∼ 8000 。 K. 2) PUSH AUTO ; Set the AWB mode to Push Auto, then WB Mode is auto. ⓑ SWB(Special WB) ; Under the special WB condition( Differ from curve of the control color temperature ), Adjust Red and Blue to perform a desired Auto White Balance. 7 / 17

Prosecutor Day / Night Camera Specifications AWB SET. RED ADJUST RED ADJUST Set : This function is available for Special WB mode. This mode is the adjustment of user option for special color. A) Select the “RED ADJUST” in submenu. Using Tele/wide Command, B) Adjust the level from -30 to 30. The initial level is zero. AWB SET. RED ADJUST -30. AWB SET. RED ADJUST +30. AWB SET. BLUE ADJUST BLUE ADJUST Set : This function is available for Special WB mode. This mode is the adjustment of user option for special color. A) Select the “BLUE ADJUST” in submenu. Using Tele/wide Command, B) Adjust the level from -30 to 30. The initial level is zero. AWB SET. BLUE ADJUST AWB SET. BLUE ADJUST +30. AWB SET. INITIAL SET ON. A) Select the “ININTIAL SET ” in submenu. Using Tele/wide Command, B) Set the initial set mode to ON or OFF Using Near/Far Command 3.3 INITIAL SET : If initial mode set to ON, All AWB function is changed to the factory setting AWB SET. INITIAL SET OFF. AWB SET. RETURN A) Select the “RETURN ” in submenu. Using Tele/wide Command, B) Set the return mode Using Near/Far Command 3.4 RETURN TO MAIN MENU : This function is exit to main menu. 8 / 17

Prosecutor Day / Night Camera Specifications MENU. AE SET. AE AE MODE Auto. (4) AE SET 4.1 AE Mode Set : This function is for changing to AE mode. A) Set up “AE SET” in main menu using Protocol command or Demo. Soft ware. B) Select the “AE MODE” in submenu. Using Tele/wide Command, C) Set the mode auto, iris MAN, AGC MAN, Manual, Auto using Near/Far Command. AE AE MODE IRIS MAN. AE AE MODE AGC MA.N. AE. IRIS ADJUST ##. 4.2 IRIS ADJUST Set : This function is available for IRIS MAN mode. A) Select the “IRIS ADJUST” in submenu. Using Tele/wide Command, B) Adjust the level from 85 MIN to 221 MAX. * ## : Current level at Auto mode. AE. IRIS ADJUST 85 MIN. AE. IRIS ADJUST 221 MAX. AE. IRIS ADJUST ##. 4.3 AGC ADJUST Set : This function is available for AGC MAN mode. A) Select the “IRIS ADJUST” in submenu. Using Tele/wide Command, B) Adjust the level from 85 MIN to 221 MAX. * ## : Current level at Auto mode. AE. IRIS ADJUST 0. AE. IRIS ADJUST / 17

Prosecutor Day / Night Camera Specifications AE. BRIGHTNESS ##. 4.4 BRIGHTNESS ADJUSTMENT Set : A) Select the “BRIGHTNESS” in submenu. Using Tele/wide Command, B) Adjust the level from 0 MIN to 99 MAX. * ## : Current level at Auto mode. AE. BRIGHTNESS 0. AE. BRIGHTNESS 99.. AE BACKLIGHT OFF. 4.5 BACKLIGHT Set : A) Select the “BACKLIGHT” in submenu. Using Tele/wide Command, B) Set the mode OFF, ON, or AUTO using Near/Far Command. AE. BACKLIGHT ON. AE. BACKLIGHT AUTO.. * Auto BLC (Auto back light compensation) When a back light condition occurs in area1,area2, area3, or area4. the back light compensation is enable. When the back light condition disappears in that area, BLC is disable automatically. If do not want this mode, set to OFF Area 0 Area 1 Area 2 Area 3 Area 4 AE SET. FLICKERLESS OFF. 4.6 FLICKERLESS Set : A) Select the “FLICKERLESS” in submenu. Using Tele/wide Command, B) Set the mode OFF, ON using Near/Far Command. AE SET. FLICKERLESS ON. * FLICKERLESS ; Use for removing the flicker of picture. ON : Remove the flicker ( In case of NTSC System ; Shutter Speed 1/100 sec In case of PAL System ; Shutter Speed 1/120 sec ). 10 / 17

Prosecutor Day / Night Camera Specifications AE SET. SHUTTER NORMAL. 4.7 SHUTTER SPEED Set : A) Select the “SHUTTER” in submenu. Using Tele/wide Command, B) Set the mode NORMAL, 1/100 ~ 1/10000 using Near/Far Command. AE SET. SHUTTER 1/250. AE SET. SHUTTER 1/ AE SET. INITIAL SET ON. A) Select the “ININTIAL SET ” in submenu. Using Tele/wide Command, B) Set the initial set mode to ON or OFF Using Near/Far Command 4.8 INITIAL SET : If initial mode set to ON, All AE function is changed to the factory setting AE SET. INITIAL SET OFF. AE SET. RETURN A) Select the “RETURN ” in submenu. Using Tele/wide Command, B) Set the return mode Using Near/Far Command 4.9 RETURN TO MAIN MENU : This function is exit to main menu. 11 / 17

Prosecutor Day / Night Camera Specifications MENU. SPECIAL SET. SPECIAL SET USER TITEL (5) SPECIAL SET 5.1 User Title Set : This function is for custom title on screen display. A) Set “SPECIAL SET” in main menu using Protocol command or Demo. Soft ware. B) Select the “USER TITLE” in submenu. Using Tele/wide Command, C) Set the position of title and set data using Tele / Wide, Near/Far Command. SPECIAL SET. SHARPNESS SHARPNESS ADJUST Set : A) Select the “SHARPNESS” in submenu. Using Tele/wide Command, B) Adjust the level from 0 to 15. SPECIAL SET. SHARPNESS 0. SPECIAL SET. SHAPRNESS 15. SPECIAL SET. MIRROR ON. 5.3 MIRROR Set : A) Select the “MIRROR” in submenu. Using Tele/wide Command, B) Select the mode ON, OFF using Near/Far command. SPECIAL SET. MIRROR OFF. 12 / 17

Prosecutor Day / Night Camera Specifications SPECIAL SET. COLOR ON. 5.4 COLOR Set : This mode is for B/W mode. A) Select the “COLOR” in submenu. Using Tele/wide Command, B) Select the mode ON, OFF using Near/Far command. SPECIAL SET. COLOR OFF. SPECIAL SET. COLOR ON. 5.5 NEGATIVE Set : This mode is to change color and luminance to negative. A) Select the “COLOR” in submenu. Using Tele/wide Command, B) Select the mode ON, OFF using Near/Far command. SPECIAL SET. COLOR OFF. SPECIAL SET. WIDEBURST ON. 5.6 WIDE BURST Set : This mode is to change color burst width for long distance application. A) Select the “WIDEBURST” in submenu. Using Tele/wide Command, B) Select the mode ON, OFF using Near/Far command. SPECIAL SET. WIDEBURST OFF. SPECIAL SET. INITIAL SET ON. A) Select the “ININTIAL SET ” in submenu. Using Tele/wide Command, B) Set the initial set mode to ON or OFF Using Near/Far Command 5.7 INITIAL SET : If initial mode set to ON, All SPECIAL functions are changed to the factory setting SPECIAL SET. INITIAL SET OFF. 13 / 17

Prosecutor Day / Night Camera Specifications SPECIAL SET. RETURN A) Select the “RETURN ” in submenu. Using Tele/wide Command, B) Set the return mode Using Near/Far Command 5.8 RETURN TO MAIN MENU : This function is exit to main menu. MENU. MOTION DET. MOTION DETECTION ON. (6) MOTION DETECTION SET 6.1 DETECTION Mode Set : A) Set “MOTION” in main menu using Protocol command or Demo. Soft ware. B) Select the “DETECTION” in submenu. Using Tele/wide Command, C) Set the mode ON, OFF using Near/Far Command. MOTION MOTION OFF. MOTION. LEVEL SET ##. 6.2 LEVEL ADJUST Set : This function is available for DETECTION ON mode. A) Select the “LEVEL SET” in submenu. Using Tele/wide Command, B) Adjust the level to some sensitivity. * ## : Current value in motion detection ON mode. MOTION. LEVEL SET MOTION. INITIAL SET ON. A) Select the “ININTIAL SET ” in submenu. Using Tele/wide Command, B) Set the initial set mode to ON or OFF Using Near/Far Command 6.3 INITIAL SET : If initial mode set to ON, All MOTION functions are changed to the factory setting MOTION. INITIAL SET OFF. 14 / 17

Prosecutor Day / Night Camera Specifications MENU. F. OSD. F. OSD FUNCTION DISP ON MOTION DET DISP ON CAMERA ID DISP ON ZOOM MAG DISP ON USER TITLE DISP ON INITIAL DISP ON INITIAL SET ON (7) F. OSD SET 7.1 FUNCTION Set : A) Set F. OSD ” in main menu using Protocol command or Demo. Soft ware. B) Select the mode what you want in submenu. Using Tele/wide Command, C) Set the display mode of OSD using Tele / Wide, Near/Far Command. * INITIAL SET and RETURN are the same as before procedure. MOTION. RETURN A) Select the “RETURN ” in submenu. Using Tele/wide Command, B) Set the return mode Using Near/Far Command 6.4 RETURN TO MAIN MENU : This function is exit to main menu. F. OSD FUNCTION DISP OFF MOTION DET DISP OFF CAMERA ID DISP OFF ZOOM MAG DISP OFF USER TITLE DISP OFF INITIAL DISP OFF INITIAL SET OFF (8) E. SENSITIVITY SET: Not used 15 / 17

Prosecutor Day / Night Camera Specifications E SENSITIVITY. INITIAL SET ON. A) Select the “ININTIAL SET ” in submenu. Using Tele/wide Command, B) Set the initial set mode to ON or OFF Using Near/Far Command 8.2 INITIAL SET : If initial mode set to ON, E.SENSITITY functions are changed to the factory setting E SENSITIVITY. INITIAL SET OFF. E SENSITIVITY. RETURN A) Select the “RETURN ” in submenu. Using Tele/wide Command, B) Set the return mode Using Near/Far Command 8.3 RETURN TO MAIN MENU : This function is exit to main menu. 16 / 17

Prosecutor Day / Night Camera Specifications MENU. WDR. 9.1 WDR SET A) Select the “WDR” in main menu using Protocol command or Demo. Soft ware B) Select the “WDR CONTROL” in submenu. Using Tele/wide Command, B) Select the WDR mode what you want in submenu. Using Near/Far Command * Mode sequence : OFF-- ON -- AUTO * WDR Auto mode is working at the condition of high light back light. WDR. WDR CONTROL OFF.. WDR. WDR CONTROL ON.. (9) WDR: WDR. SENSITIVITY ##. 9.2 LEVEL ADJUST Set : This function is the gain adjustment of WDR A) Select the “SENSITIVITY” in submenu. Using Tele/wide Command, B) Adjust the level to some sensitivity using Near / Far Command. * ## : Current value of SENSITIVITY is before setting value. WDR. SENSITIVITY WDR. WDR CONTROL AUTO.. WDR. INITIAL SET ON. A) Select the “ININTIAL SET ” in submenu. Using Tele/wide Command, B) Set the initial set mode to ON or OFF Using Near/Far Command 9.3 INITIAL SET : If initial mode set to ON, All WDR functions are changed to the factory setting WDR. INITIAL SET OFF. WDR. RETURN A) Select the “RETURN ” in submenu. Using Tele/wide Command, B) Set the return mode Using Near/Far Command 6.4 RETURN TO MAIN MENU : This function is exit to main menu. 17/ 17