1 Learning Objectives The Importance Of Company Logos The Importance Of Company Image The Importance Of Packaging / Presentation Rules governing what should appear on packaging. The Significance Of Standards In Industry The Significance of CAD/CAM in Industry Steps In The Manufacture Of The Mini Torch

2 Clean Up All Parts

3 Take A Piece Of Sticky Back Copper

4 Cut To Size Of Patch 10mm x 30mm

5 Remove Backing and Stick to Pad

6 Using Bostik Don’t Squeeze The Tube It Will Ooze out on it’s own

7 Place A Little Glue All Round The Edge

8 Place Middle Section With V Cut Up

9 Place Batteries In Holes Exactly As Shown

10 Take LED Notice One Leg Is Shorter Than The Other

11 Gently Bend Legs As Shown

12 Take A Piece Of Insulating Shrink Tube

13

14 Heat Tube To Cause It To Shrink

15 Place Led In Position Ensure Legs Cross The Batteries

16 Add A Little Glue And Top Nip In Vice Until Set.

17 Torch Vacuum Packaging Aperture Dimensions