TETRA Modem TMO-100 Change and Upgrade Information for Version V3 May 2015 Funk-Electronic Piciorgros GmbH

Piciorgros GmbH * Germany HW and SW Upgrade of the TMO-100 V3 TETRA Data Modem TMO-100 V3 is 100% compatible with TMO-100 Version V2 DIP-10 Switch on the bottom of the device has been removed Single press button on the back of the device to be used for getting a temporary default IP and (optional) resetting the TMO-100 to factory default The TMO-100 RJ45 connector on the top is now a Dedicated Port for Expansion I/O Modules (I/O Version only) Dedicated Connector for Voice Communication using the Piciorgros Handset (HW Option on order) The former AUX-Interface providing an RJ11 connector on the bottom of the unit has been replaced by a D-Sub 9 on top of the TMO All software upgrades (including the TETRA Core) for the TMO-100 are now done via the Ethernet port Logger Data is now captured via the AUX port (RS-232) The RF Display has now one Red LED (RF0) indication the sensitivity margin for safe data communication The RF-LED’s are now calibrated and show the RSSI in 5 db steps A new AMA LED indicates wrong Antenna (or cable) Matching The device (Option) covers 370 MHz – 430 MHz in one Frequency Band The TMO now provides the option OTA with Fallback Capability (Over The Air upgrade) New Cyber Security Features added (see separate information) Antenna Connector changed to SMA (better shielding than BNC)

Piciorgros GmbH * Germany

Funk - Electronic Piciorgros GmbH Claudiastr Köln-Porz Germany