3/20/2012Lui Multicore Design1

3/20/2012Lui Multicore Design2  Glow plug  Stainless steel container  Nickel powder with Iron micro-powder  Thermocouples

3/20/2012Lui Multicore Design3 Multiple cores placed inside tray. With water flowing in between them. Water inlet/outlet. Reservoir carved out of copper block. Water flow Holder tubes carved out of copper block Place cores in holding tray Glow plugs Plumbing Holders Powders

3/20/2012Lui Multicore Design4 Surround core with coil for inductive coupling Cores in holding Tray Glow plugs Cores with coils Coolant Plumbing Holders Powders

3/20/20125 Core container must pass Magnetic field at several frequencies TBD Curved bottom makes the powder stay at center. Windings Lui Multicore Design

3/20/2012Lui Multicore Design6 Core MgH2 Tablet is placed inside core and at ~300 degrees the tablet will decompose into H2 Glow Plug

3/20/20127 Alternative: Use resistive heating element just under core containers. Replace glow plugs with spark plugs for RF input or other. Layers Spark plugs Cores with coils Heater Plumbing Lui Multicore Design