Poliren №2;№3 in standart composition technique with composites

Poliren ® Paste №2 Poliren ® Paste №2 Contains: an abrasive (silicone oxide) fractions microns

The result of application Effective enamel professional cleaning Quality removing of soft plaque and pelliculas in tight spaces and fissures Easily washed off with water-air jet Pleasant refreshing taste The result of application Effective enamel professional cleaning Quality removing of soft plaque and pelliculas in tight spaces and fissures Easily washed off with water-air jet Pleasant refreshing taste Indications for use: For enamel treatment prior to restoration or teeth whitening, prior to the sealing of fissures For removal of the soft plaque Caries prevention Indications for use: For enamel treatment prior to restoration or teeth whitening, prior to the sealing of fissures For removal of the soft plaque Caries prevention

Poliren ® Paste №3 Poliren ® Paste №3 Contains: An abrasive (corundum) fractions 3-5 microns

Advantages: High-quality of filling processing Convenient application Excellent rinsability with water The effect of moist-free shine Advantages: High-quality of filling processing Convenient application Excellent rinsability with water The effect of moist-free shine Indication for use: Easily washed off with water-air jet Indication for use: Easily washed off with water-air jet

Clinical case No. 1 Tooth 11 before restoration Tooth 11 before restoration The tooth preparations for cleansing with paste “Poliren No.2”

Clinical case No. 1 Cleansing the surface of the tooth 11 with the paste “Poliren No. 2” before restoration The step of etching

Clinical case No. 1 Preparation for the polishing of restoration Tooth 11, the phase of polishing with paste “Poliren No. 3”

Clinical case No. 1

Clinical case No. 2 Type of dental restoration 12;11;21;22 after contouring and grinding Composite resin polishing was held

Clinical case No. 3 Teeth 12;11;21;22 before treatment, the vestibular surface Teeth 12;11;21;22 before treatment, the vestibular surface Teeth 12;11;21;22 before treatment, the palatal surface

Clinical case No. 3 Teeth 12;11;21;22 after restoration

Clinical case No. 4 Teeth12;11;21;22 before treatment Teeth 12;11;21;22 after the stage of restoration polishing

Clinical case No. 4 Completed the first stage of restoration polishing

Clinical case No. 5 Teeth 12;11;21;22 before treatment

Clinical case No. 5 Restoration after finished polishing Polishing of composite resin was held

Clinical case No. 6 Teeth 12;11;21;22 before treatment Teeth 12;11;21;22 after the restoration

Clinical case No. 6

Conclusions: The main requirement for dental restoration with self-curing composite materials is accurate and methodical execution of instructions. Only when all process steps are done the desired adhesion of the composite to dental tissue is achieved and good cosmetic result is obtained. Pastes "Poliren No. 2" and "Poliren No. 3" are used in the initial and the final stage of work with composite resin, which are extremely important in standard operation technique with this group of filling materials. Materials "Poliren No. 2" and "Poliren No. 3" are clinically effective, have convenient form of release, the optimal ratio price/quality that allows them to compete with analogues in the dental market.