Chapter Menu Mixtures and Solutions Section 14.1Section 14.1Types of Mixtures Section 14.2Section 14.2 Solution Concentration Section 14.3Section 14.3 Factors Affecting Solvation Section 14.4Section 14.4 Colligative Properties of Solutions Exit Click a hyperlink or folder tab to view the corresponding slides.

Section 14-1 Section 14.1 Types of Mixtures Compare the properties of suspensions, colloids, and solutions. solute: a substance dissolved in a solution suspension colloid Brownian motion Tyndall effect soluble miscible insoluble immiscible Identify types of colloids and types of solutions. Describe the electrostatic forces in colloids. Mixtures can be either heterogeneous or homogeneous.

Section 14-1 Heterogeneous Mixtures A heterogeneous mixture is a mixture that does not have a uniform composition and in which the individual substances remain distinct. Suspensions are mixtures containing particles that settle out if left undisturbed.Suspensions

Section 14-1 Heterogeneous Mixtures (cont.) Colloids are heterogeneous mixtures of intermediate sized particles (between 1 nm and 1000 nm) and do not settle out.Colloids The most abundant substance in a mixture is the dispersion medium. Colloids are categorized according to the phases of their particles.

Section 14-1 Heterogeneous Mixtures (cont.)

Section 14-1 Heterogeneous Mixtures (cont.) Brownian motion is the jerky, random movements of particles in a liquid colloid, from the results of particle collisions.Brownian motion The Tyndall effect is when dispersed colloid particles scatter light.Tyndall effect

Section 14-1 Homogeneous Mixtures Solutions are homogeneous mixtures that contain two or more substances called the solute and solvent. Most solutions are liquids, but gaseous and solid solutions exist.

Section 14-1 Homogeneous Mixtures (cont.)

Section 14-1 Homogeneous Mixtures (cont.) A substance that dissolves in a solvent is soluble. soluble Two liquids that are soluble in each other in any proportion are miscible.miscible A substance that does not dissolve in a solvent is insoluble.insoluble Two liquids that can be mixed but separate shortly after are immiscible.immiscible

A.A B.B C.C D.D Section 14-1 Section 14.1 Assessment Miscible substances are: A.two liquids that are not soluble in each other B.solids that dissolve in liquids C.solids that do not dissolve in liquids D.two liquids that are soluble in each other

A.A B.B C.C D.D Section 14-1 Section 14.1 Assessment The jerky, random movement of particles in a liquid colloid is known as ____. A.Brownian motion B.Tyndall effect C.Charles’s Law D.kinetic energy

End of Section 14-1

Section 14-2 Section 14.2 Solution Concentration Describe concentration using different units. solvent: the substance that dissolves a solute to form a solution concentration molarity molality mole fraction Determine the concentrations of solutions. Calculate the molarity of a solution. Concentration can be expressed in terms of percent or in terms of moles.

Section 14-2 Expressing Concentration The concentration of a solution is a measure of how much solute is dissolved in a specific amount of solvent or solution.concentration Concentration can be described as concentrated or dilute.

Section 14-2 Expressing Concentration (cont.)

Section 14-2 Expressing Concentration (cont.)

Section 14-2 Expressing Concentration (cont.) Molarity is the number of moles of solute dissolved per liter of solution.Molarity Dilution equation: M 1 V 1 = M 2 V 2

Section 14-2 Expressing Concentration (cont.) Molality is the ratio of moles of solute dissolved in 1 kg of solvent.Molality

Section 14-2 Expressing Concentration (cont.) Mole fraction is the ratio of the number of moles of solute in solution to the total number of moles of solute and solvent.Mole fraction where X A and X B represent mole fractions of each substance

Section 14-2 Expressing Concentration (cont.)

A.A B.B C.C D.D Section 14-2 Section 14.2 Assessment Which is NOT a quantitative measure of concentration? A.molarity B.molality C.percent by mass D.dilute

A.A B.B C.C D.D Section 14-2 Section 14.2 Assessment The number of moles of solute divided by liters of solvution is called ____. A.molarity B.molality C.percent by volume D.percent by mass

End of Section 14-2

Section 14-3 Section 14.3 Factors Affecting Solvation Describe how intermolecular forces affect solvation. exothermic: a chemical reaction in which more energy is released than is required to break bonds in the initial reactants Define solubility. Understand what factors affect solubility.

Section 14-3 Section 14.3 Factors Affecting Solvation (cont.) solvation heat of solution unsaturated solution saturated solution supersaturated solution Henry’s law Factors such as temperature, pressure, and polarity affect the formation of solutions.

Section 14-3 The Solvation Process Solvation is the process of surrounding solute particles with solvent particles to form a solution.Solvation Solvation in water is called hydration. The attraction between dipoles of a water molecule and the ions of a crystal are greater than the attraction among ions of a crystal.

Section 14-3 The Solvation Process (cont.)

Section 14-3 The Solvation Process (cont.) Sucrose molecules have several O–H bonds, which become sites for hydrogen bonding with water molecules. Oil does not form a solution with water because there is little attraction between polar water molecules and nonpolar oil molecules.

Section 14-3 The Solvation Process (cont.) During solvation, the solute must separate into particles and move apart, which requires energy. The overall energy change that occurs during solution formation is called the heat of solution.heat of solution

Section 14-3 Factors That Affect Solvation Stirring or shaking moves dissolved particles away from the contact surfaces more quickly and allows new collisions to occur. Breaking the solute into small pieces increases surface area and allows more collisions to occur. As temperature increases, rate of solvation increases.

Section 14-3 Solubility Solubility depends on the nature of the solute and solvent. Unsaturated solutions are solutions that contain less dissolved solute for a given temperature and pressure than a saturated solution.Unsaturated solutions

Section 14-3 Solubility (cont.) Saturated solutions contain the maximum amount of dissolved solute for a given amount of solute at a specific temperature and pressure.Saturated solutions Solubility is affected by increasing the temperature of the solvent because the kinetic energy of the particles increases.

Section 14-3 Solubility (cont.)

Section 14-3 Solubility (cont.) A supersaturated solution contains more dissolved solute than a saturated solution at the same temperature.supersaturated solution To form a supersaturated solution, a saturated solution is formed at high temperature and then slowly cooled. Supersaturated solutions are unstable.

Section 14-3 Solubility (cont.)

Section 14-3 Solubility (cont.) Gases are less soluble in liquid solvents at high temperatures. Solubility of gases increases as its external pressure is increased. Henry’s law states that at a given temperature, the solubility (S) of a gas in a liquid is directly proportional to the pressure (P).Henry’s law

A.A B.B C.C D.D Section 14-3 Section 14.3 Assessment For a given amount, which type of solution contains the LEAST amount of solute? A.solvated B.saturated C.supersaturated D.unsaturated

A.A B.B C.C D.D Section 14-3 Section 14.3 Assessment At a given temperature, the solubility of a gas is directly proportional to what? A.volume B.mass C.molarity D.pressure

End of Section 14-3

Section 14-4 Section 14.4 Colligative Properties of Solutions Describe colligative properties. ion: an atom that is electrically charged Identify four colligative properties of solutions. Determine the boiling point elevation and freezing point depression of a solution.

Section 14-4 Section 14.4 Colligative Properties of Solutions (cont.) colligative property vapor pressure lowering boiling point elevation freezing point depression osmosis osmotic pressure Colligative properties depend on the number of solute particles in a solution.

Section 14-4 Electrolytes and Colligative Properties Colligative properties are physical properties of solutions that are affected by the number of particles but not by the identity of dissolved solute particles.Colligative properties Ionic compounds are electrolytes because they dissociate in water to form a solution that conducts electricity. Some molecular compounds are also electrolytes.

Section 14-4 Electrolytes and Colligative Properties (cont.) Electrolytes that produce many ions in solution are strong electrolytes. Many molecular compounds do not ionize when dissolved, and do not conduct electricity.

Section 14-4 Vapor Pressure Lowering Adding a nonvolatile solute to a solvent lowers the solvent’s vapor pressure. When a solute is present, a mixture of solvent and solute occupies the surface area, and fewer particles enter the gaseous state. The greater the number of solute particles, the lower the vapor pressure.

Section 14-4 Vapor Pressure Lowering (cont.) Vapor pressure lowering is due to the number of solute particles in solution and is a colligative property of solutions.Vapor pressure lowering

Section 14-4 Boiling Point Elevation When a nonvolatile solute lowers the vapor pressure of a solvent, the boiling point is also affected. More heat is needed to supply additional kinetic energy to raise the vapor pressure to atmospheric pressure.

Section 14-4 Boiling Point Elevation (cont.) The temperature difference between a solution’s boiling point and a pure solvent's boiling point is called the boiling point elevation.boiling point elevation ΔT b = K b m where ΔT b is the boiling point elevation, K b is the molal boiling point elevation constant, and m represents molality.

Section 14-4 Boiling Point Elevation (cont.)

Section 14-4 Freezing Point Depression At a solvent's freezing point temperature, particles no longer have sufficient kinetic energy to overcome interparticle attractive forces. The freezing point of a solution is always lower than that of the pure solvent.

Section 14-4 Freezing Point Depression (cont.) Solute particles interfere with the attractive forces among solvent particles. A solution's freezing point depression is the difference in temperature between its freezing point and the freezing point of the pure solvent.freezing point depression ΔT f = K f m where ΔT f is the freezing point depression, K f is the freezing point depression constant, and m is molality.

Section 14-4 Freezing Point Depression (cont.)

Section 14-4 Osmotic Pressure Osmosis is the diffusion of a solvent through a semipermeable membrane.Osmosis

Section 14-4 Osmotic Pressure (cont.) Osmotic pressure is the amount of additional pressure caused by water molecules that moved that moved into the concentrated solution.Osmotic pressure

A.A B.B C.C D.D Section 14-4 Section 14.4 Assessment Nonvolatile solutes ____ the vapor pressure of a solution. A.increase B.decrease C.do not change D.unpredictably change

A.A B.B C.C D.D Section 14-4 Section 14.4 Assessment Colligative properties of a solution depend on: A.the type of solute B.the type of solvent C.the vapor pressure of the solvent D.the number of particles of solute

End of Section 14-4

Resources Menu Chemistry Online Study Guide Chapter Assessment Standardized Test Practice Image Bank Concepts in Motion

Study Guide 1 Section 14.1 Types of Mixtures Key Concepts The individual substances in a heterogeneous mixture remain distinct. Two types of heterogeneous mixtures are suspensions and colloids. Brownian motion is the erratic movement of colloid particles. Colloids exhibit the Tyndall effect. A solution can exist as a gas, a liquid, or a solid, depending on the solvent. Solutes in a solution can be gases, liquids, or solids.

Study Guide 2 Section 14.2 Solution Concentration Key Concepts Concentrations can be measured qualitatively and quantitatively. Molarity is the number of moles of solute dissolved per liter of solution. Molality is the ratio of the number of moles of solute dissolved in 1 kg of solvent.

Study Guide 2 Section 14.2 Solution Concentration (cont.) Key Concepts The number of moles of solute does not change during a dilution. M 1 V 1 = M 2 V 2

Study Guide 3 Section 14.3 Factors Affecting Solvation Key Concepts The process of solvation involves solute particles surrounded by solvent particles. Solutions can be unsaturated, saturated, or supersaturated. Henry’s law states that at a given temperature, the solubility (S) of a gas in a liquid is directly proportional to the pressure (P) of the gas above the liquid.

Study Guide 4 Section 14.4 Colligative Properties of Solutions Key Concepts Nonvolatile solutes lower the vapor pressure of a solution. Boiling point elevation is directly related to the solution’s molality. ∆T b = K b m A solution’s freezing point depression is always lower than that of the pure solvent. ∆T f = K f m Osmotic pressure depends on the number of solute particles in a given volume.

A.A B.B C.C D.D Chapter Assessment 1 When dispersed solids in a colloid scatter light, it is known as ____. A.Tyndall effect B.Brownian motion C.Henry’s law D.Charles’s law

A.A B.B C.C D.D Chapter Assessment 2 Molality is: A.the number of moles of solute divided by liters of solution B.the volume of solute divided by liters of solution C.the volume of solute divided by the volume of solution D.the number of moles of solute divided by kg of solvent

A.A B.B C.C D.D Chapter Assessment 3 Which is NOT a type of solution? A.saturated B.unsaturated C.polyunsaturated D.supersaturated

A.A B.B C.C D.D Chapter Assessment 4 The addition of a nonvolatile solute to a solution: A.increases the freezing point of the solution B.increases the vapor pressure of the solution C.lowers the boiling point of the solution D.decreases vapor pressure of the solution

A.A B.B C.C D.D Chapter Assessment 5 Solutes in a solution can be: A.liquids only B.liquids and solids only C.gases and solids only D.gases, liquids, or solids

A.A B.B C.C D.D STP 1 Which is NOT an intensive physical property? A.volume B.hardness C.density D.mass

A.A B.B C.C D.D STP 2 Cl 2 (g) + 2NO(g) → 2NOCl is what type of reaction? A.dehydration B.synthesis C.fusion D.replacement

A.A B.B C.C D.D STP 3 If 8 mol of H 2 is used, how many moles of Fe will be produced? Fe 3 O 4 (s) + 4H 2 →3Fe(s) + 4H 2 O(l) A.2 B.3 C.4 D.6

A.A B.B C.C D.D STP 4 Which is NOT a colligative property? A.heat of solution B.boiling point elevation C.vapor pressure lowering D.freezing point depression

A.A B.B C.C D.D STP 5 Nonvolatile solutes _____ the boiling point of a solution. A.increase B.decrease C.do not change D.unpredictably change

IB Menu Click on an image to enlarge.

IB 1

IB 2

IB 3

IB 4

IB 5

IB 6

IB 7

IB 8

IB 9

IB 10

IB 11

IB 12

IB 13

IB 14

CIM Table 14.2Types and Examples of Solutions Figure 14.10Dissolution of Compounds Figure 14.19Strong, Weak, and Non-Electrolytes Figure 14.23Osmosis

Help Click any of the background top tabs to display the respective folder. Within the Chapter Outline, clicking a section tab on the right side of the screen will bring you to the first slide in each respective section. Simple navigation buttons will allow you to progress to the next slide or the previous slide. The “Return” button will allow you to return to the slide that you were viewing when you clicked either the Resources or Help tab. The Chapter Resources Menu will allow you to access chapter specific resources from the Chapter Menu or any Chapter Outline slide. From within any feature, click the Resources tab to return to this slide. To exit the presentation, click the Exit button on the Chapter Menu slide or hit Escape [Esc] on your keyboards while viewing any Chapter Outline slide.

End of Custom Shows This slide is intentionally blank.