RCLayout User note January 2013

Do product layout

Useful information

Access > > RConnect (new RC Intranet) > Sales Support Portal

> Windows ID user & Windows password = RCAD access Access

> You don’t have to wait! > Your account is automatically created as soon as you go onto

Advise > Have a mouse when using the website!

Let’s go!

> Click on OPEN > My layouts management

> F11 button to be in full screen (useful when small screen laptop) > F11 button to desactivate full screen mode

To start from an existing project

> Search for an existing project > Select it in the list > Double-click or click on OPEN

To start a project from zero

> Start a new project from zero

> Name your project > Start from zero (=Blank) > Or start from a model

> Name the first stand of your project > Fill in the width in cm > Choose the range

> Fill in the height & the depth for the first level

To add a new level

> Click on the right button of your mouse > Click on Add level

To add a stand

> Use the tabs to navigate

> Click on Stand > Click on Add a stand

To put products on a level

> Select your range

> Select your format, hold the click & drag it onto the level

Label associated to the level

> The label gathers the main information of the level

> Remain = Space available on the level in cm > -3cm is the maximum

Colour code when dragging the bags

> VERT = enough space to put the bag!

> ORANGE = still fine but close to the limit

> RED = not enough space

> 3 possible reasons: - The bag goes too much onto another bag -Not enough space remaining on the level (Remain < -3cm ) -The height is too short

To manage the level functionalities

> Click right on the level to access the functionalities

Add a new level Put the bags to the right Put the bags to the left Justify Change the width of the level and stand Change the height & depth of the level Move the level up Move the level down Empty the level Delete the level

To duplicate a product

> Click on Ctrl & hold the click > Select the product with the left button of the mouse & hold the click to move the product

To select several products

> Draw a zone (here in blue). To do it, click on a point & hold the click to enlarge the zone. > You can move it or duplicate it (as for a product).

The storage area

> Storage area

Functionalities to manage a stand

> Click on Stand

> Functionalities linked to the management of a stand

Add a new stand in the project Empty the current stand Delete the stand Change stand width Change the name of the stand Print stand 2D view Print stand product list > Functionalities linked to the management of a stand

Functionalities to manage a project

> Click on Project

> Functionalities linked to the management of the project

Save Empty the whole project Close the project Print in 2D Product list in pdf Product list in Excel file Save as > Functionalities linked to the management of the project

3D view

> Click on 3D view

> View by default: ¾ view from the left

> Click anywhere on the 3D view, hold the click & then move your mouse to change the angle view

> Zoom or dezoom with the mouse scroll

> Print your 3D view

> Direct print > Save the view as pdf > Save the view as jpg > Change the printing format

Workshop 1

Build this stand 1m33: 5 level: H:25cm D:70cm 4 level: H:25cm D:70cm 3 rd level: H:36cm D:70cm 2 nd level: H:36cm D:70cm 1 st level: H:42cm D:70cm

Add a stand. 66cm wide. 6 ème niveau: H:25cm P:70cm 5 ème niveau: H:25cm P:70cm 4 ème niveau: H:33cm P:70cm 3 ème niveau: H:33cm P:70cm 2 ème niveau: H:36cm P:70cm 1 er niveau: H:36cm P:70cm

> Export the product list of the whole project in pdf > Export the product list of the 1st stand in Excel

> Print this view