Standard Referencing Points Referencing Points: Provide visual cues to establish vehicle position. Relate part of the vehicle to some part of the roadway.

Slides:



Advertisements
Similar presentations
Parallel parking.
Advertisements

Virginia Department of Education
Basic Maneuvering Tasks: Low, Moderate & Complex Risk Driving Environments Section 3 (Day 2)
Driving Maneuvers and how to do them by J. M. Christensen and how to do them by J. M. Christensen.
Chapter 6 Performing Basic Vehicle Manuers
Bell Ringer #3 1.List 3 places you should NOT park. 2.Oops…You just parked in one of those places that you’re NOT supposed to park…describe in detail what.
PARKING.
Basic Maneuvering Tasks:
CHAPTER 6 BASIC MANEUVERS.
Western Oregon University Oregon Department of Transportation Transportation Safety Division Driver Risk Prevention Curriculum Introduction to Backing.
REFERENCE POINTS Relating a part of the vehicle to some part of the roadway. This relationship is a helpful visual reference of your vehicle in it’s operating.
Parallel Parking Identify 1½ Car Lengths of Available Space
Managing Time and Space Vehicle Positioning. USE ANY OF THESE VISUAL TECHNIQUES 1.IPDE 2.The Smith System 3.Zone Control.
Right and Left Turns.
lesson 4.3 PARKING MANEUVERS Parking your car is a skill.
OBJECTIVES  We will demonstrate an ability to select and safely execute turnabouts  We will demonstrate an ability to select and safely execute parking.
New Jersey’s Seat Belt Law
Vision and Perception Requirements
Starting, Steering, and Stopping
Vehicle Control Vehicle Direction / Speed Requirements
MODULE FOUR Objectives: Students will learn to identify moderate risks driving environments, space management, roadway positions, turning rules, and parking.
OBJECTIVES  We will utilize basic space management concepts to adjust speed or the path of travel when approaching controlled and uncontrolled intersections,
Ch. 6 - Passing NY State DMV 1. The law requires that we drive on the right side of the road.  When we are allowed to pass other vehicles, we usually.
Performing Basic Vehicle Maneuvers
Turning at Intersections
Chapter 6 Basic Car Maneuvers
Gaining Visual InformationGaining Visual Information - Focus Vision - Focus Vision - Central Vision - Central Vision - Peripheral Vision - Peripheral Vision.
Shelton School District Precise Vehicle Placement
Driver’s Education Section IV Day 3. Objectives DMVM – pages (Copy these) »Vehicle Operating Space »Reference Points »Communication with other drivers.
Chapter 6. Steering Use comfortable, balanced hands DRIVING FORWARD... WHICH WAY DO YOU TURN THE WHEEL TO GO RIGHT? Right GO LEFT? Left.
Virginia Department of Education
Virginia Department of Education
The New Jersey Driver Manual
Driver’s Education Chapter 6 Performing Basic Vehicle Manuers.
Mind Moo-ver Objective: SWBAT understand and practice executing parking techniques QOD: What is a “Value” – what is something that you value?
Performing Basic Vehicle Maneuvers
Vehicle Balance Weight Shifts Change Vehicle Balanced DROPS Front LIFTS Rear T – 2.28 Topic 4 Lesson 2 Accelerating, braking, or steering shifts the vehicle’s.
Performing Basic Vehicle Maneuvers. Steering  Use a comfortable, balanced hand position(9 and 3 o-clock position) to keep safe from the air bags. –Over.
UTAH Driver Education and Training
lesson 4.2 BASIC DRIVING MANEUVERS
Virginia Driver Responsibilities: Preparing to Operate a Vehicle Topic 1 -- Driver Preparation Procedures Topic 2 -- Identifying Vehicle Control Devices.
Section 2 Day 2 Virginia Driver Responsibilities: Preparing to Operate a Vehicle.
Section 2 (Day 4) Virginia Driver Responsibilities: Preparing to Operate a Vehicle.
Section 3 Basic Maneuvering Tasks: Low ,
Basic Maneuvering Tasks: Moderate Risk Driving Environment Topic 1 -- Risk Topic 2 -- Space Management System Topic 3 -- Lane Changes Topic 4 -- Turnabouts.
Basic Maneuvering Tasks: Moderate Risk Driving Environment Topic 1 -- Risk Topic 2 -- Space Management System Topic 3 -- Lane Changes Topic 4 -- Turnabouts.
Information Processing: Complex Risk Environments Topic 1 -- Characteristics of Expressways Topic 2 (through Lesson 1)-- Entering, Changing Lanes, and.
Basic Maneuvering Tasks: Moderate Risk Driving Environment Topic 1 -- Risk Topic 2 -- Space Management System Topic 3 -- Lane Changes Topic 4 -- Turnabouts.
Basic Maneuvering Tasks: Moderate Risk Driving Environment Topic 1 -- Risk Topic 2 -- Space Management System Topic 3 -- Lane Changes Topic 4 -- Turnabouts.
Basic Maneuvering Tasks: Moderate Risk Driving Environment Topic 1 -- Risk Topic 2 -- Space Management System Topic 3 -- Lane Changes Topic 4 -- Turnabouts.
Objectives: Students will utilize critical thinking and problem solving skills to learn basic driving skills Topics covered:  Basic maneuvers to enter,
Chapter 6 Performing Basic Vehicle Maneuvers
Module 4 Tarah, Stephen, Jared, and Terence. Risk Assessment Risk –the chance of injury, damage, or loss. Chance –the possibility of something going wrong.
Basic Maneuvers Driver Education Unit 1. Risk Risk is the Chance of Injury, Damage, or Loss Risk is the Chance of Injury, Damage, or Loss Injury, Damage,
Ch. 4: Performing Basic Vehicle Maneuvers
Section 3 Basic Maneuvering Tasks: Low ,
Kathleen, Sarah, Denisha, Brad.  Risk is the chance of injury, damage, or a loss  Chance is the odds of failure or success  Increasing speed increases.
Module 3: Vision and Driving Topics 2-6
Risk Risk is the Chance of Injury, Damage, or Loss Risk is the Chance of Injury, Damage, or Loss Injury, Damage, or Loss Usually Are the Consequences of.
1. Place Foot Firmly on Service Brake 2. Select Proper Gear - Overdrive, Drive, or Reverse 3. Perform Traffic Checks - Forward, Rear, and Sides 4. Apply.
Performing Basic Vehicle Maneuvers
Driver’s Education Section IV Day 3.
Reference Points and Driving Skills
The New Jersey Driver Manual
Performing Basic Maneuvers
Virginia Department of Education
Managing Time and Space Vehicle Positioning
lesson 4.3 PARKING MANEUVERS Parking your car is a skill.
Managing Time and Space Vehicle Positioning
lesson 4.2 BASIC DRIVING MANEUVERS
Presentation transcript:

Standard Referencing Points Referencing Points: Provide visual cues to establish vehicle position. Relate part of the vehicle to some part of the roadway. Allow the driver to determine proper placement within a lane. Allow for reduced-risk lane positions. T – 2.36 Topic 5 Lesson 2 RIGHT Reference Points LEFT Reference Points 6 inches from line or median 3 feet from line or median 6 inches from line or curb 3 feet from line or curb

Front Limitation AT INTERSECTIONSAT INTERSECTIONS IN A STOPPING POSITIONIN A STOPPING POSITION PARKINGPARKING You will need to know where the front end of your vehicle is when you are: T – 2.37 Topic 5 Lesson 2 STOP LINE

Front Limitation Where are your visual reference points to determine FRONT LIMITATION ? T – 2.38 Topic 5 Lesson 2

Front Limitation Reference Points To stop 3-6 inches from the line in front of your bumper, stop when your line of sight runs under the side view mirror reference point to the line in front of your vehicle.To stop 3-6 inches from the line in front of your bumper, stop when your line of sight runs under the side view mirror reference point to the line in front of your vehicle. Maintain a normal driving position when targeting your reference point and do not lean forward or sideways.Maintain a normal driving position when targeting your reference point and do not lean forward or sideways. T – 2.39 Topic 5 Lesson 2 Reference Point Line of sight Reference point

Rear Limitation BACKINGBACKING PARKINGPARKING You need to know where the rear of your vehicle is when you are: T – 2.40 Topic 5 Lesson 2

Rear Limitation T – 2.41 Topic 5 Lesson 2 Where are your visual reference points for REAR LIMITATION ?

Rear Limitation To align the rear bumper three to six inches from a line or curb, you need to stop when the line or curb appears near the middle of the rear right window when looking over the right shoulder. T – 2.42 Topic 5 Lesson 2 Reference point

Right Side Limitation T – 2.43 Topic 5 Lesson 2 Establishing reference points for right side limitation will allow you to: know where the curb or line is on the right side of the street park parallel 3-6 inches away from a line or curb establish lane position 3establish lane position inches Line of sight Reference point

Right Side Limitation T – 2.44 Topic 5 Lesson 2 The right side limitation reference point to position your vehicle 3-6 inches from the curb or line is the middle of your vehicle’s hood. 3-6 inches Line of Sight Reference point The reference point for 3 feet from the curb or line is the right 1/4 section of the hood. 3 feet Reference point Line of Sight

Left Side Limitation determine position when parking on the left side of a one-way street (3-6 inches from the curb or line)determine position when parking on the left side of a one-way street (3-6 inches from the curb or line) determine lane position 2determine lane position 2 T – 2.45 Topic 5 Lesson INCHES Establishing reference points for left side limitation allows the driver to:

Left Side Limitation Your left side limitation reference point is about one foot from the left front corner of your car (it may be the seam between your left fender and the hood of your vehicle) to the curb. T – 2.46 Topic 5 Lesson INCHES Reference Point Line of Sight Reference Point

Lane Position # 1 VEHICLE IS CENTERED IN THE LANEVEHICLE IS CENTERED IN THE LANE CAR IS 3 FEET AWAY FROM THE LINES ON YOUR RIGHT AND LEFT SIDESCAR IS 3 FEET AWAY FROM THE LINES ON YOUR RIGHT AND LEFT SIDES T – 2.48 Topic 5 Lesson 3 3 FEET Lane Position ONE ( LP 1 )

Lane Position # 1 Lane Position ONE (LP 1) T – 2.49 Topic 5 Lesson 3 3 FEET Your left side reference point runs through the driver’s side left fender to the line on the left side of the vehicle.Your left side reference point runs through the driver’s side left fender to the line on the left side of the vehicle. Your right side reference point runs through the center of passenger’s side right half of the hood to the line on the right side of the vehicle.Your right side reference point runs through the center of passenger’s side right half of the hood to the line on the right side of the vehicle. Note: Lane position #1 is the lane position used most often.

Lane Position # 2 VEHICLE IS 3-6 INCHES AWAY FROM LINE TO THE LEFTVEHICLE IS 3-6 INCHES AWAY FROM LINE TO THE LEFT T – 2.50 Topic 5 Lesson INCHES Lane Position TWO ( LP 2 )

Lane Position # 2 Your lane position #2 reference point is about 1 foot from left side (it may be the crease between the left fender and hood of the vehicle) to the curb. T – 2.51 Topic 5 Lesson 3 Lane Position TWO (LP 2) 3-6 INCHES 6 FEET

Lane Position # 3 CAR IS POSITIONED 3-6 INCHES AWAY FROM EDGE OR LINE TO THE RIGHT T – 2.52 Topic 5 Lesson INCHES Lane Position THREE ( LP 3 )

Lane Position # 3 Your lane position #3 reference point is through the center of your hood to the right edge of the roadway. T – 2.53 Topic 5 Lesson 3 Lane Position THREE (LP 3) (LP 3) 3-6 INCHES 6 FEET Reference point Line of Sight

Lane Positions LP 1 Position 2 is near the lane line to your left and is used when there is a restriction to your path of travel or your line of sight and you cannot move to the adjacent lane. T – 2.54 Topic 5 Lesson 3 Moving from Lane Position ONE to TWO LP 2 OBSTACLE

Lane Positions Position 3 is near the lane line to your right and is used when there is a restriction to your path of travel or line of sight and you cannot move out of the lane. T – 2.55 Topic 5 Lesson 3 Moving from Lane Position ONE to THREE LP 1 LP 3 OBSTACLE

Possible Lane Positions The width of the lane allows drivers to make lane position adjustments to minimize risk and create more space between their car and problem situations. T – 2.56 Topic 5 Lesson 3 Lane Positions – 1, 2, 3, 4, and 5 LP 3 LP 2 LP 4 LP 5 LP 1 OBSTACLE