Dr. Andrey Ponomarev STC of Applied Nanotechnology Inc. St. Petersburg, Russia EpoxyPAN Technology

Main parameters of EpoxyPAN Pressure strength, more then, Mpa …… Adhesion, more then, Mpa …………..…...5,5 Density, less then, g/cm 3 ………………..…1,7 Color (by color additive)……………….anyone Water absorption, no more,% ,3 Damp-proof, no less, W (Mpa)……………..20 Lifetime ( 2,5 pH media), no less, years…..30 Frost resistance, cycles, no less………..F500 Thermostability, no less, grad.C………….160

EpoxyPAN coating technology Coating the any surface by EpoxyPAN is a very simple technology and it include two stages: A. Deal the adhesive and primers B. Deal the main composite coating Usual paint sprayer Texture sprayer LC-02 (B-002B)

EpoxyPAN on the plaster and on the GMS EpoxyPAN on the Plaster EpoxyPAN on the glass-magnesium sheets

EpoxyPAN on the FPU EpoxyPAN on the heat insulator foam, as vandalproof & waterproof coating

EpoxyPAN on the Concrete & Metal surfaces EpoxyPAN coating on the concrete & melall surfaces provide high value of corrosion protection of substrates Concrete Tunnel Steel samples Brick, protected by EpoxyPAN

EpoxyPAN on the Piers of the Dam

A new possibility of EpoxyPAN application – a noise damping As it was founded, EpoxyPAN coating 0,4 mm thick on the GMS is possible to damp a noise more 2-3 Db in a wide spectra range ( Hz) The light composite sheet, containing EpoxyPAN for effective noise protecting ( more, then 25 Db)

Cost and feasibility EpoxyPAN coating has all necessary certification in CIS; The experience of real use in the coating of bridges, tunnels in the underground and palaces; Price – over 17$ per square meter (thickness 0,8 - 1 mm). 9