Operating procedure for POF cables Comoss Electronic Co., Ltd. Date : May-05, 2008
The fixture Comoss 3 in 1 fixture is designed for POF cable assembly
2. Splitting the duplicated cable for 60mm length. 1. Splitting the duplicated cable for 30mm length. Inside Cutter Function 1 : Splitting duplicated cable
Crimping mechanism Function 2 : Crimping connector together with cable
Function 3 : Cutting the excess fiber core. Cutting mechanism
SMI patch cord Assembly procedure : 1. Splitting the duplicated cable for 30mm 1. Push the duplicated cable onward the cutter to the further end,
After splitting, length 30mm
SMI patch cord Assembly procedure : 2. Stripping the jacket with hand tool Hand tool
After stripping, length 10mm
Comoss SMI Connector, loose piece Fixing Plate Dust cover Inner Housing Outer Housing Strain Relief (S/R)
SMI patch cord Assembly procedure : 3. Assemble the inner housing, outer housing & S/R. Outer Housing Strain Relief (S/R) Inner Housing
SMI patch cord Assembly procedure : 4. Crimping the fixing plate into inner housing. Crimping the fixing plate
After crimping
SMI patch cord Assembly procedure : 5. Cutting the excess fiber core. Cutting the fiber core
After cutting
SMI patch cord Assembly procedure : 6. Assemble the outer housing onto inner housing. Assemble the outter housing onto inner housing.
After assembly
SMI patch cord Assembly procedure : 7. Put on the dust cover. Dust cover
SMI patch cord