Model A 19-inch Rack Static Transfer Switch
Why choose a model A static transfer switch? Break before make transfers Break time < ¼ Cycle Will not transfer faults Small 1RU Design Passively Cooled One touch transfer Better than relay based Voltage free contact Preferred source selector Supported current up to 32A
Features Fast, reliable switching Transparent transfer – less than ¼ cycle. Solid state devices are far superior to their electro-mechanical equivalents. Dual redundant internal power sources.
Weight and Dimensions Width: : 483mm, 19” Rack Height: 44mm, 1.7” Depth: 285mm, 11.2” Weight (typical): 2.5Kg, 5 lb
Features Real time monitoring Simple mimic status. Simple Load indicator LEDS. Preference LEDS. Visual and Audible Alarm. Remote Contact.
Programmable logic control Fast internal communication. All variables are easily set in software. Constantly monitors for alarm conditions. Intelligent transfers. Features
Flexible input/output configurations 2 IEC C19 Inlets or Terminals 2 IEC C20 Outlets and 8 IEC C13 Outlets
Specification Type2-pole / 1-phase Current Rating16A32A Nominal Voltage 115V to 230V +- 20% Fault Current1kA for 20ms, 100A Fused Frequency50 / 60Hz (auto detection) THD15% Power FactorNo Limit Crest Factor3.5:1 Overload Capacity 80A for 30 sec. 100A for 1 sec. 1,000A for 20 ms.