Coolant Fill Coolant Check and Fill. Oil Fill & Dip Stick Main Engine Oil Fill Dip Stick Delo 400 – 40 wt. Engine Oil.

Slides:



Advertisements
Similar presentations
Service Tips April COOLING SYSTEM To check and/or fill the cooling system it is necessary to remove the rear fender, the fuel tank (photo 1) and.
Advertisements

2.3 Waste Management – Revised IBTS
Peterson Product Support
Dennis Fire Appliances Operations & use. PTO Step 1 Move slide cover towards the drivers seat to lock out the gearbox Step 2 Select drive on the gear.
Operation of One Speed Control valve. Transmission control valve N-range operation Transmission Control valve.
MAINTAINING YOUR VEHICLE
Automobile Engine NO.4. NO.1 Mercedes-Benz E-class.
Cooling System Get the engine up to optimum operating Temperature as quickly as possible and maintains it at that temperature. Controls the heat produced.
Robert Youngjohns
Getting to Know Your Vehicle
The Truckee Meadows Fire Protection District Presents.
SAFETY MEETING Off Highway Trucks. Brakes There are four separate controls used for braking Service Brake Retarder Secondary Brake Parking Brake.
Water supply and drafting. Objectives Understand and be able to demonstrate the different hydrant lays and hook ups Explain/demonstrate how to operate.
Open valve 1 so that the flow is from the reservoir to the pump head. Close Valve 4 so flow is stopped. Make sure Valve 2 is open to vent.
DAILY APPARATUS CHECKS The goal of a daily inspection is to ensure all systems and equipment are in proper working order before apparatus leave the station.
1B-1 Fire Engine Maintenance Unit 1B – Pump Inspections and Maintenance.
Nassau County Underground Oil Tank Requirements
Diesel Generator Reliability: Lessons Learned from Storms
Dennis Sabre Fire Appliances
Diesel Engine Starting and Reversing
AIR COMPRESSORS & STEAM CLEANERS. Pressurized air is produced by an air compressor. Air compressors are used daily in automotive shops. They are used.
Fuel Oil Systems Fuel Oil Systems consist of: Storage Tanks Pumps
Hydronic Mechanical Controls
Series Operational Training. 2 Water Tank Water Pump Multiple Discharges 2000 Series Line Strainer Foam Tank Electronic Direct Injection Proportioner.
1 Fuel Pumps. 2 Pumps 1.All oil burners for residential heating have pumps A. They are connected to a motor through a coupling 2.Description A. An oil.
Engine Information & Engine Components and Systems.
Water Handling Operations
Engine Compartment Left Side. Oil-to-Fuel Heat Exchanger.
Jeopardy! Recycling I nspections Coolant TransEngine Oil General
Propellers The engines are equipped with four bladed, full
Section 703 Apparatus Inspection. Procedures The driver/operator should follow a systematic procedure for inspecting apparatus This ensures that all important.
Tweety Operation Manual. Refurbish History Motor 1) Cummings Diesel (V6), ) Red Line 3000 (hums at 2800) 3) Top Speed 60 MPH.
EU 1000i and EU 2000i SECTION: Tools and Equipment ISSUED: REVISED: ##-####
Eco-Winter Installation. – Step 1 – Mount Eco-bypass to water heater.
Diesel Fuel - Fill Place all spill safety equipment where needed
DIESEL FUEL FILL 1.Secure Fireboat 2 to fueling dock, fueling vessel, or vessel to receive fuel (Fig ). 2.Develop communications as needed, including.
Weekly Checks Monday – VSP Room Tuesday – Pilothouse System Controls Wednesday – Starboard / Engine Room Thursday – Foam Room Friday – Port / Engine Room.
Monday – VSP Room weekly checks Visually Check: Hvac system for leaks & valve settings Fresh water system for leaks & valve settings VSP linkage Autopilot.
HPU FILTERS LOW PRESSURE FILTER FROM APU UNIT. CLOSE APU HYDRAULIC FLUID VALVE. FILL FILTER WITH HYDRAULIC FLUID PRIO TO INSTALLATION. LUBRICATE GASKET.
Photos and Sensor Instructions
Potable Water System General Locations and Operations.
1. Gear housing 2. Engine dataplate 3. Air intake 4. Fuel pump 5. Fuel filter 6. Starter 7. Lube oil pan 8. Lube oil drain 9. Crankshaft timing pin port.
Fire/General Service/Ballast Pumping Systems
Bilge Pumping Systems General Locations.
Machinery Cooling Water System Locations and Operations.
Oil Pressure Testing.
LESSON 16 ENGINE OPERATION
Engine Speed Amps Engine Temp. Engine Oil Pr. Trans. Fluid Pr. Battery overheat Engine overheat Exhaust hose overheatExhaust overheat Low oil pressure.
Wednesday – starboard side engine room weekly checks Cycle all valves on the starboard side of the engine room Check all systems, connections, valves,
STEP 1 Locate the transmission cooler line connection on the vehicle. Identify the correct adapters to be used by referring to the vehicle application.
UH-60A/L Fuel System.
AfterSalesTraining Welcome to AfterSalesTraining.
STORAGE AND MAINTENANCE OF LARGE FARM EQUIPMENT Prepared by : Von G. Peavy South Region Ag Mechanics.
MAINTENANCE INTERVAL SCHEDULE D6R TRACK TYPE TRACTOR 7AR EVERY 10 SERVICE HOURS OR DAILY.
MACHINE OPERATION.
Air Cleaner.
2803 Toba Leah Ericson 28 Quarter Berth Settee Head V Berth Lazarette
Pumped Discharge. Brian Makin 14/
Friday – port side engine room weekly checks
Small Engine Parts I.D.
The fuel system Engine HFO MDO
Cooling System Get the engine up to optimum operating Temperature as quickly as possible and maintains it at that temperature. Controls the heat produced.
ITEMS TO CHECK ON Running Pumps
SB Packing Automatic Downpuller Power Unit
______________ Combustion Engine
Service Tips April 2005.
Photos and Sensor Instructions
Cooling System Get the engine up to optimum operating Temperature as quickly as possible and maintains it at that temperature. Controls the heat produced.
Compressor Operating Instructions
Preventive Maintenance
Presentation transcript:

Coolant Fill Coolant Check and Fill

Oil Fill & Dip Stick Main Engine Oil Fill Dip Stick Delo 400 – 40 wt. Engine Oil

Engine Oil Dipstick Not “Full Mark When Not Running Not Operating range when Not running When Operating Range When Running (Below 900 rpm)

Engine Oil Suction (Drain) Suction Connection

Reverse Gear (starboard side) Dipstick – Check When Not Running Dipstick – check when engine is NOT running Vent Oil Fill Plug – use 40 wt engine oil

Reverse Gear Dipstick Operating Range Check When Engine is NOT Running Fill With 40wt. Engine Oil

Generator Coolant Do Not Check When Hot

Generator Oil Fill & Dipstick Use 40 wt. Engine Oil Do Not Check when Running

Generator Dipstick Operating Range – “Check When Not Running”

Grey Water Tank Grey Water Tank ( 50 Gallons ) Grey Water Pump Switch

Fresh Water Tank Level Fill at the Yellow Mark Down about 250 Gallons

Fresh Water Fill (port side forward) 1” to ¾” Reducer is in the Equipment Room

Storage Tank Control Valves Forward Tank Valve Closed Main Tank Valve Closed (under engine room floor)

Day Tank Fuel Level Fill At The “RED” Mark

Foam Tank Valves (normally closed) Valves Normally Closed

Foam Tank Level (normally full) Level Normally Full Full

Battery Status Touch Screen

Compressed Air Status Touch Screen

Main Engine Brain Switches Main Engines Pump Engines Turn - on Mains every A.M. and Pumps as needed