The Little Ann Assembly Instruction By Laser Dollhouse Designs.

Slides:



Advertisements
Similar presentations
One-Point Perspective…
Advertisements

There is a small window here where you can put a small pointed object (scissor or knife) and lift up the little door to allow the silicone band to slide.
EML 2023 – Modeling, Assemblies Lecture 3.2 – Assemblies, part 2.
ICRA Panel System Installation Instructions
Typical Walk-in Closet with elfa® décor
Spiral Stairs Assembly Instruction By Laser Dollhouse Designs
The Lisa San Francisco Assembly Instruction By Laser Dollhouse Designs.
The Little Nikki Assembly Instruction By Laser Dollhouse Designs.
The Jasmine Gothic Victorian Cottage Assembly Instruction
Lone Star Region National Model Railroad Association “The Shack” Scratch Build -Mike Jobe.
Quick and Easy Model Building. 3D Models Purpose: To represent the final design in a physical form that is as realistic as possible, computer- generated.
Bricking the Mason 2x4 Evaporator
22 Elevations Chapter Permission granted to reproduce for educational use only.© Goodheart-Willcox Co., Inc. Objectives List features that should be.
BASIC TUTORIAL ON AUTODESK REVIT Created By MHS Architecture Portfolio.
The Stephanie Country Mansion Dollhouse Assembly Instruction
Creating a section view using floor plans
Pneumatic Arm Assembly Instructions. Contents of Pneumatic Arm Kit Wooden pieces (⅜” cross-section): 1 X 24”; 1 X 21⅛”; 8 X 7½”; 4 X 7⅛”; 4 X 7”; 2 X.
Elevations.
Tiffany Victorian assembly instructions By Laser Dollhouse Designs.
Hand-cranked Windmill Assembly Instructions copyright Mechanical Kits Ltd
The Ariel Assembly Instruction By Laser Dollhouse Designs.
The Jasmine Gothic Victorian Dollhouse Assembly Instruction
Basic Stairway Arrangements • Stairway Components
Mantle Clock. Beginning Steps Cut 2 piece 20 x 5 to make the 2 sides and top/bottom Cut 1 10 ¾ and 1- 9 from each 20 piece. This will make a side and.
Please start Bellwork # HW, red pen, book on desk.
Basic Building Techniques. Connecting Bricks Bricks can be connected in a variety of ways. We will look at 3 ways here: – stacked – overlapping – staggered.
SHED CONSTRUCTION A Visual Guide. C.A.D. Example.
Drafting and Dimensioning the Architectural Floor Plan
Basic Building Techniques. Exploration Time Use the next 15 minutes to build. After the 15 minutes are up, everything will need to be broken apart and.
Lone Star Region National Model Railroad Association “The Shack” Scratch Build -Mike Jobe SESSION 2.
Chapter 13 Floor Plans. Chapter 13 Floor Plans.
Current Floor Plan N. Marking C1 indicates that a load bearing steal beam is present at each end of the existing exterior wall which both need to stay.
Chapter 23 Elevation Layout and Drawing Techniques.
EDT Elevations1 Weekend Cabin Retreat Project Elevations Sacramento City College EDT 300/ENGR 306.
22 Elevations Chapter Permission granted to reproduce for educational use only.© Goodheart-Willcox Co., Inc. Introduction to Elevations Elevation –An.
One Point Perspective Design and Technology. One Point Perspective Task 3 Here are some high quality examples of what we are aiming to produce by the.
EDT Cabin Design Project - Elevations1 Weekend Cabin Retreat Project Elevations Sacramento City College EDT 300 Kenneth Fitzpatrick, P.E.
BALUSTRADE  A row of repeating posts which support the upper rail of railing. Staircases and porches often have ballustrades.
1 Presentation 10: FLOOR SYSTEM COMPONENTS. 2 Framing Methods Platform Framing: –Each floor is constructed and then walls are placed on top.
Beamline Readiness Review - Hutch Beamline Microdiffraction March 28, 2006.
The Victorian Gazebo Assembly Instruction By Laser Dollhouse Designs.
This is the finished body RADIUS LOFT EXTRUDE. Creating the body taper Open the wing Click on new part in context.
Orthographic Drawings
Castle Project Name___________________ Period___________________ Mr. Martin- World History- Room 8.
Bridge Project. Materials – 8 pieces of wood, glue, cutters, masking tape and a ruler.
Gingerbread House Construction Instructions graham crackers 2.Knife 3.Cutting board 4.Hot glue gun 5.Base for house (paper plate)
In this tutorial you will learn how to insert different types of clip art into your Power Point presentation. You will need to open either an existing.
Surface Area The sum of the areas of each face on a 3-D figure To find surface area, add the area of each face together Front-2 X 5 = 10 Back-2 X 5 = 10.
The Glenrose assembly Instructions By Laser Dollhouse Designs.
Andrew M. Age 8 Missouri. Andrew M. Age 8 Missouri.
Adding Stairs to Your House
Construction Framing Mr. Brock.
Elevation Layout and Drawing Techniques
My Google Sketch up Historical House By: Ashley Mahoney
Hand-cranked Windmill Assembly Instructions
Building a Nightstand Woods 1 Final Project Step #1
Assembly instructions for M-K all bolt together hoppercone kit.
Fold Your Own Bank Activity
The Abriana Assembly Instruction By Laser Dollhouse Designs
Wood Frame Construction
The Garage Assembly Instruction By Laser Dollhouse Designs
INTRODUCING ONE POINT PERSPECTIVE graphic marr college.
Popsicle House.
The Victorian Gazebo II Assembly Instruction
Wall and Ceiling Construction
Week 5 Drafting and Dimensioning the Architectural Floor Plan.
Creating Elevations from a floor plan
Assembling your Gingerbread Folk house
2D Shapes Rectangle Circle Triangle Rectangle. What shape is the door? Rectangle.
The Country Outhouse assembly Instruction By Laser Dollhouse Designs
Presentation transcript:

The Little Ann Assembly Instruction By Laser Dollhouse Designs

Parts for assembly Door Assembly Roof Assembly Subfloor Assembly S1 thru S4 2 nd Floor Assembly 2A, 2B & Fretwork 1 st and 2 nd Floors Fence Assembly Window Frames Plexiglas 1 st Floor Walls 1A, 1E, & 1F Porch rails 1A, 1B & 1C Stairs Base Floor

Step 1. locate the Base floor and position as seen in Figure 1 Figure 1 Step 2. Locate Subfloor Assembly S1 thru S4 and insert S1 thru S4 tabs into Base floor matching Slots S1-S4 as seen in Figure 2 Figure 2

Step 3. Take the First floor marked 1A thru 1F and insert on top of assembled subfloor by aligning open slots to tabs. Refer to figure 3. Figure 2 Figure 3 Step 4. Take 1A Wall and insert into slot 1A on first floor. Then insert door assembly thru cutout for the door opening. Refer to figure 4 and 5. Figure 4 Figure 5

Step 5. Take the two rectangle and one half circle Plexiglas cutouts and insert into openings from the interior side of wall. Finally secure by placing the interior door frame in place. Refer to figure 6, 7 and 8. Figure 7 Figure 6 Figure 8

Step 6. Take the porch rail 1A, 1B and 1C and insert into slots 1A-1C. Also place walls 1E and 1F into respective slots on first floor. Refer to figure 9. Figure 9

Step 7. Place window frame on exterior of walls 1E and 1F Refer to figure 10. Figure 10 Step 8. Place window Plexiglas cutouts into cutouts of walls 1E and 1F from the interior side and then place interior frames to secure. See figures 11 and 12. Figure11 Figure12

Step 9. Secure first floor by inserting second floor on top and aligning cutout tabs to slots on top of first floor rails and walls. See figures 13 Figure13 Step 10. Place second floor walls 2A and 2b into slots provided. Refer to figure 14 Figure14 Step 11. Place window frame and Plexiglas into 2A as done with walls 1E and 1F. See figure 15 Figure15

Step 12. Align and place one side of the roof making sure the cut slots closest to the top are up as in figure 16 Note: Two front cutout, The most forward cutouts closest to the top is right side up facing. Figure16 Step 13. Place fretwork into roof by matching tabs and slots. See figure 17 Figure17

Step 14. Now add the other side of the roof by matching the tabs and slots. Refer to figure 18 Figure18 Step 15. Locate the post as seen in figure 19. This post fits to the front right forward corner. Place fence rail as seen in figure 20 into the side of post and into base. Once in place should be as in figure 21 Figure19 Figure20 Figure21

Step 16. Locate the fence rail as seen in figure 22 and add to opening in post. Next locate post as seen in figure 23 and insert fence and post to base. The circle to hold functioning gate should be at bottom. Figure22 Figure23 Step 17. Locate final fence rail with swing gate along with remaining side fence and insert into base as seen in figure 24 Figure24

Step 18. Take stairs assembly and place within fence as seen in figure 25 Figure25 The Little Ann is now completed. Time for some Happy decorating!!! Laser Dollhouse Designs