Topics to be Discussed Star-Delta Transformation. Equivalence.

Slides:

Advertisements

Similar presentations

Working with Complex Circuits WORKING WITH COMPLEX CIRCUITS Physics:Electricity Jane Syltie.

Advertisements

Series and Parallel Circuits

Unit 8 Combination Circuits

A route for the flow of electricity that has elements of both parallel and series circuits, and also multiple batteries that mess with our heads!

Unit 8 Combination Circuits

Advanced electronics.  EMF  Electromotive "force" is not considered a force measured in newtons, but a potential, or energy per unit of charge, measured.

10 Network Theorems Chapter Topics Covered in Chapter 10

Network Theorems. Circuit analysis Mesh analysis Nodal analysis Superposition Thevenin’s Theorem Norton’s Theorem Delta-star transformation.

BASIC LAWS Ohm’s Law Kirchhoff’s Law Series resistors & voltage division Parallel resistors & current division Source Transformation Y -  transformation.

Systematic Circuit Analysis Nodal Analysis Chapter 4 Section 1.

EE2003 Circuit Theory Chapter 2 Basic Laws

Network Theorems SUPERPOSITION THEOREM THÉVENIN’S THEOREM

Circuits Series and Parallel. Series Circuits Example: A 6.00 Ω resistor and a 3.00 Ω resistor are connected in series with a 12.0 V battery. Determine.

Basic Laws of Electric Circuits Nodes, Branches, Loops and

It should be as low as possible. It should be as high as possible.

Parallel Circuits Lecture No.5 By – Engr Sajid Hussain Qazi Mehran U.E.T Campus Khairpur.

CHAPTER-2 NETWORK THEOREMS.

Series Circuits AKA Voltage Dividers Cardinal Rules for Series Circuits Potential difference is divided proportionately amongst each of the resistors placed.

Solve the equation. 2(x + 7)2 = 16.

Basic Electrical Engineering Lecture # 04 Simple Resistive Circuits Course Instructor: Engr. Sana Ziafat.

Series and Parallel Circuits Khemraj Nandanwar T.G.T.(Work Experience) Kendriya Vidyalaya,Golaghat.

Network Theorems.

Parallel Circuits – Chapter 5

Series Circuits EE 2010: Fundamentals of Electric Circuits Mujahed AlDhaifallah.

Series and Parallel Circuits. Series Circuit Current must pass through all resistors.

Physics 12 Circuits 4 – Parallel Mr. Jean. The plan: Video clip of the day Series Circuits –Mini-Lab - Series Parallel Circuits:

Circuits with more than one resistor, then Watt happens? Series and Parallel are the 2 ways of connecting multiple resistors.

Chapter 20 Capacitors in Series and Parallel Capacitors in Circuits Like resistors, capacitors in circuits can be connected in series, in parallel, or.

Delta-Wye Conversions

IB Physics 12 Mr. Jean November 12 th, The plan: Video clip of the day Series & Parallel Circuits.

Circuit Theory Chapter 2 Basic Laws

November 4, 2013 Topic: Electric Circuit Objectives:

What is the equivalent resistance of this circuit? What is the current running through the first resistor? What is the potential difference drop across.

Lecture-5. Md.Kausher ahmed Electrical department.

SINGLE LOOP CIRCUITS A single loop circuit is one which has only a single loop. The same current flows through each element of the circuit-the elements.

1. Simplify 3 4 – ANSWER 11 Solve the equation. 2. 3x2 + 8 = 23 ANSWER

Lesson 6: Current Sources Source Conversion

Electric Circuits. Electric circuit: a complete path from the positive terminal to the negative terminal.

SPH3U: Electricity Kirchhoff's Laws & Resistors. Circuits Review  Label the following as a Parallel Circuit or a Series Circuit. Label all the parts.

Physics Section 18.2 Apply series and parallel circuits. Note: A simple circuit may contain only one load. A more complex circuit may contain numerous.

Solving Problems 14.1 & A circuit contains 5-ohm, 3-ohm, and 8-ohm resistors in series. What is the total resistance of the circuit? Rt = R1.

Copyright © Cengage Learning. All rights reserved. Functions 1 Basic Concepts.

 To interpret and construct electrical circuit diagrams.  To identify series and parallel arrangements of elements.  To calculate the equivalent resistance.

Chapter 2 Resistive Circuits 1. Overview of Chapter Series Resistors and Parallel Resistors 2.2Voltage Divider Circuit 2.3 Current Divider Circuit.

RESISTORS IN SERIES - In a series circuit, the current is the same

Lesson 6: Series-Parallel DC Circuits

EKT101 Electric Circuit Theory

Determining Equivalent Resistance

Solving Circuits.

Lesson 7: Current Sources / Source Conversion

Topics to be Discussed Star-Delta Transformation. Equivalence.

CIRCUIT THEORY TUTORIAL 2 – Topic 4: Network Theorem

Topics to be Discussed Star-Delta Transformation. Equivalence.

1. Simplify 3 4 – ANSWER 11 Solve the equation. 2. 3x2 + 8 = 23 ANSWER

Warm Up Simplify each expression. 1. 3x + 2y – 5x – 2y

Network Reduction: Star–Delta Transformation

Delta-Wye Conversions

Series vs Parallel Circuits

FIGURE 6-1 The amount of current flowing into junction point A equals the total amount of current flowing out of the junction.

Circuit Principles Kirchhoff’s Current Law (KCL)

Source Transformation

FIGURE 6-1 The amount of current flowing into junction point A equals the total amount of current flowing out of the junction.

Parallel Circuits – more than one path (branch)

Series Circuit.

Topics to be Discussed Star-Delta Transformation. Equivalence.

Midterm Solutions Source Transformations

Circuit Principles Kirchhoff’s Current Law (KCL)

Chapter 20 Capacitors in Series and Parallel

Example 28.1 Terminal Voltage of a Battery

Presentation transcript:

Topics to be Discussed Star-Delta Transformation. Equivalence. STAR to DELTA. DELTA to STAR. Problems. Important Note.

Star-Delta Transformation

Equivalence Equivalence can be found on the basis that the resistance between any pair of terminals in the two circuits have to be the same, when the third terminal is left open.

First take delta connection: between A and C, there are two parallel paths, one having a resistance of R2 and other having a resistance of ( R1+R3) Hence resistance between terminal A and C is = R2.(R1+R3)/[R2+( R1+R3)]

Now take the star connection The resistance between the same terminal A and C is (RA+RC) Since terminal resistance have to be same so we must have (RA+RC) = R2.(R1+R3)/[R2+( R1+R3)] (1) Similarly for terminals A and B, B and C, we can have the following expression (RA+RB) = R3.(R1+R2)/[R3+( R1+R2)] (2) (RB+RC) = R1.(R2+R3)/[R1+( R2+R3)] (3)

DELTA to STAR Now subtracting 2 from 1 and adding the result to 3, we will get the following values for R1,R2 and R3. How to remember? Resistance of each arm of star is given by the product of the resistance of the two delta sides that meet at its ends divided by the sum of the three delta resistance

STAR to DELTA Multiplying 1 and 2, 2 and 3 , 3 and 1 and adding them together and simplifying, we will have the following result. How to remember: The equivalent delta resistance between any two point is given by the product of resistance taken two at a time divided by the opposite resistance in the star configuration.

Problem A delta-section of resistors is given in figure. Convert this into an equivalent star-section.

Problem The figure shows a network. The number on each branch represents the value of resistance in ohms. Find the resistance between the points E and F.

Solution

Ans. : 5.6 Ω

Problem Find the current drawn from the 5 volt battery in the network shown in figure.

Solution :

Ans. : 0.974 A

Note : During the network reduction or simplification process, some points in the original network are lost. Care must be taken during this process that no point of ultimate relevance is lost.

Review Star-Delta Transformation. Equivalence. DELTA to STAR. STAR to DELTA. Problems. Important Note.