GRAMEGNA S.p.A. Shrinking Machines

6. AUTOMATIC MACHINES

TTK 5600 AUTOMATIC TECHNOLOGY AT AN AFFORDABLE PRICE Entry level pneumatic machine with advanced control technology (PLC) L-sealing system; Schneider Electric PLC operation control; Standard Kissing-Belt; Pneumatic supply (60 lt/min) - Maximum product dimensions: (W)400 x (L)600 x (H)160mm. - Hourly output: 0 – 2400 pcs/h - Employed films: Polyolefin, PVC, Polythene NEW

TTK 5600 CS THE COMPLETENESS OF CENTER SEALING L-sealing system; Center Sealing device; Schneider Electric PLC operation control; Standard kissing-belt; Pneumatic supply (60lt/min); -Maximum product dimension: (W) 400 x (L) 600 x (H) 240mm; -Hourly output: 0 – 2400 pcs/h; -Employed films: Polyolefin, PVC, Polythene; Entry level machine with Center Sealing function for the sealing of products up to 240mm height NEW

TTK 5600 MPE A NEW CONCEPT FOR THE MAXIMUM SPEED AND FLEXIBILITY L-sealing system; Center Sealing device; Schneider Electric PLC operation control and brushless servomotor; Electric supply (no pneumatic connection is needed -Maximum product dimensions: (W) 400 x (L) 600 x (H) 240mm; -Hourly output: 0 – 3600 pcs/h; -Employed Films: Polyolefin, PVC, Polythene, OPP from 7 to 80µm; High Technology brand, completely electric powered, brushless motorized machine NEW

TTK 5600 MPS THE PLUS OF THE SIDE-SEALING Side sealing system; Center Sealing device; Schneider Electric PLC operation control and brushless servomotor; Electric supply (no pneumatic connection is needed) -Maximum product dimensions : (W) 400 x infinite lenght x (H) 240mm; -Hourly output: 0 – 3000 pcs/h; -Employed films: Polyolefin; High Technology brand, completely electric powered with side sealing (high packaging speed) NEW

New colour touch screen display but not only… New color 5.7’’ touch screen display with simplified graphics. Our motto is to make our product employment the easiest and the most intuitive as possibile With new optional function, through a wi-fi system, it is possible to transfer and reproduce the machine display on a smartphone or on a tablet device. This allow easily to put in all the data of the 250 available programs and to control the operation statistics, with an easy production lots analysis.

Innovative world-wide remote assistance No more assistance problems with the new minipack-torre tele- assistance system This point will allow us to go on with the ambitious plan to achieve, in 2020, a remote maintenance system on machines installed at our customer premises, just comfortly sitting at our desks. The first step has been made with the application of the SE 1029 and SE 1039 systems. With a small investment, the machine can be directly monitored from our Dalmine offices. Thanks to this instrument, will be able to intervene by changing any parameters and doing any type of diagnostics.

TTK - Technical features belonging to all models SEALING SENSORS New proximity inductive sensors, easy to be changed in case of breakage. The absence of activation mechanics allows them to have the highest reliability both in cutting and sealing phase. TEFLON COATED COVERAGE The protections which block the film are not painted but teflon-coated: in this way the film does not stick on them. The teflon is steady and it must not be substituted since it does not wear out. It does not need any maintenance. CABLES The electric cables are inside a stainless steel support with free access in case of maintenance.

TTK - Technical features belonging to all models DESIGN AND SAFETY New design, aesthetical and functional body-work. The machine is completely covered with safety covers. Entry and exit safety covers to guarantee the maximum safety in compliance with CE rules. The operator does not interfere during machine working SLIDING DOOR Sliding door which may be opened for free access to the inner part of the machine for inspection. It is possible to exclude all the machines safety devices, through a specific safety key, for any interventions on the machine only by highly skilled operators.

TTK - Technical features belonging to all models FILM ROLL DRAWER The film roll is placed in the inner rear side of the machine. The most part of manufactures, for economical reasons, place the film roll outside the machine, thus increasing the weight and the volume. In Minipack-torre models it is placed inside. A sliding door covering the unwiding group allows an easy access to the rear part of the machine. The door opening activates the machine safety devices. The drawer which contains the film roll is sliding. This solution makes the film roll insertion easier also with a pallet truck.

TTK - Technical features belonging to all models DOUBLE MOTOR One motor for film unwinding with manual functioning switch included. One motor for the waste film winder.

TTK - Technical features belonging to all models MOTORIZED WINDER AND WEIGHTS It is possible to change the waste film tension adding or removing weights on the winder lever. This solution allows to make a fine regulation of this system, in order always to obtain a perfect film alignment, even with irradiated or poor materials.

TTK - Technical features belonging to all models WINDER PHOTOCELL The winder photocell is really usefull: This sensor works as alarm device to signal to the operator that the waste film winder is full and must be emptied. It is possible to have the same system on the unwinding group to signal the «end film roll» ( optional). FILM DIFFUSER A very important and functional device. The forward and rearward movement allows an uniform film distribution on the waste film winder, thus optimizing all the space. This allows to increase the quantity of wrapped film, thus reducing the stop machine time to empty it.

TTK - Technical features belonging to all models PRODUCT ENTRY Product entry: with a simple adjustment it is possible to adapt the product width to the conveyor width. This is possible thanks to a moving bulkhead. There are lateral flexible folding doors for operator safety.

TTK - Technical features belonging to all models INTERNAL LIGHT For easy operator control on the machine during machine working. Everything is visible and simple. The light is low energy consumption for more energy and costs saving. WORKING SPACE The working space to lay the product is 40 cm long. This is suitable for those who do not really need an in-feed conveyor.

TTK - Technical features belonging to all models MICROPUNCHER AND ROLL POSITION INDICATOR 1- New micro-punching device with adjustable film tension adjustment. 2- A hand function switch allows the motorized roll unwinding to make the film insertion easier. 3- A upper film roll position indicator allows the roll position according to the width of the product. It works jerkily to obtain a uniform film unwinding.

TTK - Technical features belonging to all models CONTROL PANEL ON 180-DEGREE ROTATING ARM The new electrical arm position means the front is completely free, but the real advantage is that the operator can control the machine from any position most convenient to him. NEW

TTK - Technical features belonging to all models NEW INTUITIVE GRAPHICS SOFTWARE Simple to use, one-touch adjustment. With the new intuitive graphics, adjustment is simple, just press the example product and enter the parameter. This makes it possible to quickly enter all the necessary parameters, such as product size, belt speed or triangle height. NEW

TTK - Technical features belonging to all models TROUBLE SHOOTING This initially starts by identifying the malfunction and then determining its cause through a process of progressive elimination of possible known causes. Troubleshooting is used in engineering, electronics, computer science and software development as well as in many other fields: all Pratika machines are equipped with this tool as standard. NEW