Task List for Phase II Rotatable Collimator Project at SLAC 30 January 2007 CERN/LARP Video Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US LHC.

Slides:

Advertisements

Similar presentations

LARP MSM Conductor, Cable and Procurement - A. Ghosh1 Strand, Cable and Procurement BNL -FNAL - LBNL - SLAC Magnet Systems Meeting Jan 09, 2014.

Advertisements

Status of the LARP Phase II Secondary Collimator Prototype 30 September 2013 LHC Collimation WG Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US.

Status of the LARP Phase II Secondary Collimator Prototype 14 October 2013 LHC Collimation WG Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US LHC.

ILC Main Linac Superconducting Cryogen Free Splittable Quadrupole Progress Report V. Kashikhin for Superconducting Magnet Team.

LARP Rotatable Collimator Prototype Assembly completed and all mechanical tests successful: Cooling tubes now twist, under vacuum, as jaws turn, with R~1.

LARP Rotatable Collimator Prototype Assembly completed and all mechanical tests successful: Cooling tubes twist, under vacuum, as jaws turn, with R~1 m.

LARP Rotatable Collimator Prototype Assembly completed and all mechanical tests successful: Cooling tubes twist, under vacuum, as jaws turn, with R~1 m.

Nb3Sn Cable and Insulation for LARP High-Gradient Quadrupole Magnets

LARP Rotatable Collimators for LHC Phase II Collimation 26 October 2006 LARP Collaboration Meeting – Port Jefferson, NY Tom Markiewicz/SLAC Representing.

LARP Rotatable Collimator Prototype Assembly completed and all mechanical tests successful: Cooling tubes now twist, under vacuum, as jaws turn, with R~1.

The LARP Collimation Program 05 June 2007 LARP DOE Review - Fermilab Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US LHC Accelerator Research Program.

Beam LARP Rotatable Collimator Mechanical Engineering Discussion 03 October 2008 Phase II CERN ME Video Mtg. Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC.

LARP Rotatable Collimators for LHC Phase II Collimation 26 October 2006 LARP Collaboration Meeting – Port Jefferson, NY Tom Markiewicz/SLAC Representing.

Office of Science Coupling Coil Status S. Gourlay August 1, 2012.

Summary of Accelerator Systems Collimation Parallel Session 19 October 2007 LARP CM#9 - SLAC Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US LHC Accelerator.

LHC Phase II Collimator teleconference - 4 March 2008LHC Rotatable Phase II Collimators 1 beam LARP Phase II collimator Progress and Plans 4 March 2008.

Tuesday, November 16, 2010G. Favre EN/MME1 PIMS prototype construction experience Details of the construction procedure elaborated by CERN for the PIMS.

LHC Phase II Collimator Compact jaw simulations New FLUKA => ANSYS mapping scheme New 136mm x 950mm jaw –60cm primary collimator –Helical cooling channel.

LARP LHC PHASE II COLL RC1 TESTS - S. Lundgren 06 June 2006 No 1 /17 LARP Phase II Secondary Collimator RC1 Collimator Test Program Plan Forward Revised.

LHQ Coil 02 Winding and Curing Miao Yu 07/11/2013.

LARP LHC PHASE II COLL RC1 TESTS - S. Lundgren 16 May 2006 No 1 /22 LARP Phase II Secondary Collimator RC1 Collimator Test Program Revised 5/15/06.

The SLAC Phase II Collimator Program 15 June 2005 CERN Team Visit Tom Markiewicz SLAC BNL - FNAL- LBNL - SLAC US LHC Accelerator Research Program.

SLAC RC Status Report 30 August 2010 LHC Collimation Working Group Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US LHC Accelerator Research Program.

LQ03 Titanium Pole Length Study Fred Nobrega LQ Collaboration Video Meeting June 27, 2008 BNL - FNAL - LBNL - SLAC.

SLAC R&D Mtg November 2007LHC Rotatable Phase II CollimatorsSlide # / 17 beam LARP Rotatable Collimators for LHC Phase II Collimation 12 November.

LARP LHC PHASE II COLL RC1 - S. Lundgren 1 April 2009 No 1 /6n LARP Phase II Secondary Collimator RC-1 Mechanical Design Review 01/04/09.

LARP Rotatable Collimators for LHC Phase II Collimation 18 April 2007 LARP Collaboration Meeting – Fermilab Tom Markiewicz/SLAC Representing Gene Anzalone,

Beam Rotatable Collimators as a Possible US Contribution to the LHC Luminosity Upgrade Project 24 April 2008 LARP CM#10 Tom Markiewicz/SLAC BNL - FNAL-

Beam Rotatable Collimators as a Possible US Contribution to the LHC Luminosity Upgrade Project 20 June 2008 LARP DOE Review Tom Markiewicz/SLAC BNL - FNAL-

Collimation Overview 28 October 2008 LARP CM11, Fermilab Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US LHC Accelerator Research Program 1)Short Status.

LARP LHC PHASE II SECONDARY COLLIMATOR CD1 REVIEW. - E. Doyle 15 Dec /25 LARP Phase II Secondary Collimator RC1 Review SLAC 12/15/05 Prototype Engineering.

Splice Joint Design and Analysis John Escallier Brookhaven National Lab bnl - fnal- lbnl - slac US LHC Accelerator Research Program.

LARP Rotatable Collimators for LHC Phase II Collimation 09 July 2007 SLAC R&D Status Meeting Gene Anzalone, Eric Doyle, Lew Keller, Steve Lundgren, & Tom.

LARP Rotatable Collimators 19 June 2006 ILC R&D Status Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US LHC Accelerator Research Program.

LARP LHC PHASE II COLL RC1 TESTS - S. Lundgren 30 Jan 2007 No 1 /13 LARP Phase II Secondary Collimator RC1 Collimator Development and Test Program Status.

LARP LHC PHASE II COLL RC1 TESTS - S. Lundgren 10 Dec 2007 No 1 /12 LARP Phase II Secondary Collimator RC1 Collimator Development and Test Program Status.

LARP LHC PHASE II COLL RC1 - S. Lundgren 21 Sep 2009 No 1/17 LARP Phase II Secondary Collimator RC-1 Collimator Development Status and Outlook Revised.

Dan Cheng 8/27/2015 MQXFS1 Observations and Feedback from the Assembly Processes, Part II.

LHQ Coil Design and Features Miao Yu Fermilab May 09, 2012.

2 nd LARP / HiLumi Collaboration Mtg, May 9, 2012LHQ Goals and Status – G. Ambrosio 11 LHQ Goals and Status Giorgio Ambrosio Fermilab 2 nd LARP / HiLumi.

1 SLAC RC Status Report 19 July 2010 LHC Collimation Working Group Meeting Jeff Smith/SLAC BNL - FNAL- LBNL - SLAC US LHC Accelerator Research Program.

LARP Collaboration Meeting 15 Nov 1-3, 2010 Conductor Procurement and Qualification Arup K. Ghosh (BNL) bnl - fnal- lbnl - slac US LHC Accelerator Research.

LARP Phase II Secondary Collimator Status Report SLAC ILC R&D Summary Meeting 24 April 2006 T. Markiewicz/SLAC.

Status of material tests

LARP Phase II Secondary Collimator RC1

Winding Diagrams: (i) DC Winding diagrams (ii) AC Winding Diagrams

LARP Phase II Secondary Collimator RC1

LARP Phase II Secondary Collimator RC1

Problem: A kicker failure can deposit 9 x 1011 protons on any metallic

LARP Phase II Secondary Collimator RC1 Review SLAC 12/15/05 RC1 Construction and Test Plan LARP LHC PHASE II COLL REVIEW – RC1.

LARP Phase II Secondary Collimator RC-1

The LARP Collimation Program

SLAC RC Status Report US LHC Accelerator Research Program

23 April 2012 Tom Markiewicz/SLAC

Brief Status Report on Fabrication of ATF2 Quads

LARP Phase II Secondary Collimator RC1

Current Design and Short Status

LARP Phase II Secondary Rotatable Collimator

LARP Phase II Secondary Rotatable Collimator

LARP Phase II Secondary Collimator RC-1

LARP Phase II Secondary Collimator RC-0 and RC-1

LARP Rotatable Collimators for LHC Phase II Collimation

LARP Phase II Secondary Collimator RC-1

US LHC Accelerator Research Program

Micro Status Report of SLAC Phase II Plan Tom Markiewicz SLAC

RC1 Prototype Conceptual Design Review 15 December, 2005

LHC Collimator – RF Contact Concept (180o wrap)

LARP Phase II Secondary Collimator RC-0 and RC-1

US LHC Accelerator Research Program

Presentation transcript:

Task List for Phase II Rotatable Collimator Project at SLAC 30 January 2007 CERN/LARP Video Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US LHC Accelerator Research Program

LARP/CERN Video Mtg January 2007Rotatable Collimators - T. MarkiewiczSlide n° 2 / 5 Steps on Path to a Thermal Test of a Full Length Cooled Jaw: #1 Test Pieces Braze Test #1 Wind any available 10mm x 10mm tubing on convenient sized and available copper stock for mandrel and jaws Develop and document braze procedures Section for braze inspection, document results Coil winding Procedure and hardware Develop procedure and tooling to wind available tubing on short 200mm length Aluminum mandrel Test 3-axis CNC milling procedure required to machine U-bend in cooling pattern Braze Test #2 Machine short 200mm copper mandrel Wind annealed available tubing on copper mandrel and stake in place to hold Braze tubing to mandrel Machine OD and add groove to hold braze wire Machine 4 quarter 200mm jaws Braze jaws with wire & foil –Vacuum test for virtual leaks –Section for braze inspection, document results

LARP/CERN Video Mtg January 2007Rotatable Collimators - T. MarkiewiczSlide n° 3 / 5 Braze Test #3 Fab a 2 nd 200mm mandrel on CNC milling machine with space on downbeam end for U-bend Test wind coil with downstream U-Bend Braze coil Braze 4 quarter round jaws (more practice needed) Under discussion: use 8 quarter round jaw sections to make sure butt brazes pose no problem (as promised)

LARP/CERN Video Mtg January 2007Rotatable Collimators - T. MarkiewiczSlide n° 4 / 5 Should We Consider a <1m Jaw Protected by a non-rotating absorber for Improved Performance under Thermal Load?

LARP/CERN Video Mtg January 2007Rotatable Collimators - T. MarkiewiczSlide n° 5 / 5 Is this a better way to use the available space or slots? collimatorabs 1 m 10  ? Or, can we consider using a “empty” upbeam slot for such a protective absorber?