A caution to use authentication key  An introduction of authentication key To install authentication key prior to use program since it is usable only in system which the authentication key is installed.  A caution to use lock disk  You need to store a lock disk since it its essential for collection or reinstallation later. 2. To use it only for authentication install and collection since the disk lock is a special settled disk. It can ’ t be reused and you need to buy it when you format disk lock. Do not format the program. (Ask a dealer when disk is defective).  A caution to install and collection  Install authentication key when install and use T&A program first. To choose system for installation and install authentication key as using disk lock. 2. To collect authentication key as using disk lock, and install authentication key in new system when you want to transfer existing T&A program. 3. To reinstall disk lock when change existing T&A system. Reinstall authentication key after collect authentication key and change the system when T&A program change hardware systems like graphic card, LAN card. (Authentication key will not be collected when you change system without collecting it.)

 Authentication key install guide 1. Input disk lock into floppy disk (A: drive) 2. Run “ UniKey.exe ” after checking disk lock file. 3. Install authentication key by pressing [Install] button. 4. Check installation by pressing [enter] on install check screen. 5. Finish installation after checking normal install finish message. 6. “ UniKey.bss ” file will disappear on disk lock after normal installation. Authentication Key Install Guide

 Authentication key install screen guide Authentication Key Install Guide

 Authentication key collection process 1. Input disk lock to floppy disk (A: drive) 2. Run “ UniKey.exe ” after checking disk lock file. 3. Collect authentication key by pressing [collect authentication key]. 4. Check collection by pressing [enter] on collection check screen. 5. Finish Collection after checking normal collection finish message. 6. “ UniKey.bss ” file will appear on disk lock after normal collecting. Authentication key collection guide  When you need to collect authentication key There are some cases that you need to collect authentication key. 1. You can run a program normally by reinstalling authentication key after collecting it when you want to move existing program to other PC. 2. You need to collect authentication key when you want to change system hardware which is used as T&A program. And you need to collect and reinstall authentication key before change systems since it was made to be applied to the system which is set during installation.

 Authentication key collection guide Authentication key collection guide