1 S1Global Experiment Writeup Outlining WIP A N.Toge +

Chapter TitleContributorEditor 1PrefaceYamamotoToge 2IntroHayano, Jim, RoccoToge 3CavityTug, Dennis, KakoJim, WD 4CouplerTug, Dennis, KakoJim, WD 5TunerRocco, KakoRocco 6CryomodulePaolo, Serena, OhuchiRocco 7Cold mass assyTug, Kako, OhuchiJim 8CryogenicsNakaiToge 9HLRFFukuda, NantistaToge 10LLRFMichizonoToge 111-cavity operationKirk, Yuri, Dennis, RoccoToge+ 12Multi-cavity operationKirk, Yuri, Rocco, ToshiToge+ 13Cryomodule perf.Ohuchi, Peterson, NakaiToge 14DRFS operationToshi MatsumotoToge 15AlignmentHayano, TsuchiyaToge 16SummaryHayano, Jim, RoccoToge 2

1. Preface Contributor: A.Yamamoto Editor: Toge 3

2. Introduction Contributor: Hayano, Jim, Rocco Editor: Toge Outline below is Toge’s invention, not examined yet by Hayano: 1.Scope of experiment –Layout –Short system description –Goals 2.Job sharing 3.Schedule / Time evolution 4

3. Cavity Contributor:Tug, Dennis, Kako Editor: Jim, WD Below is what Toge rec’ved from Kako (for TELSA-type and TESLA- like) 1.Cavity design 2.Cavity fabrication 3.Surface preparation 4.Vertical test results 5.Joining with He jacket 6.Shipping 5

4. Coupler Contributor: Tug, Dennis, Kako Editor: Jim, WD Below is what Toge received from Kako (for TTF-III and STF-2) 1.Coupler design 2.Coupler fabrication 3.Preparation for assembly 4.Conditioning at test stand 5.Conditioning in cryomodule at room temperature 6

5. Tuner Contributor: Rocco, Kako Editor: Rocco Below is what I received from Kako (for Blade, Saclay-type and Slide- jack) 1.Tuner design 2.Tuner fabrication 3.Tuner assembly 4.Tuner performance in low-power RF test, stroke, response, vibration modes…. 7

6. Cryomodule Contributor: Paolo, Serena, Ohuchi Editor: Rocco 8

7. Cold mass assembly Contributor: Tug, Kako, Ohuchi Editor: Jim 9

8. Cryogenics Contributor: Nakai Editor: Toge 1.2K cryogenics system at STF –Generation of 2K superfluid helium –Schematic diagram of 2K cryogenic system –STF plan 2.Upgrade of cryogenic system for S1-G –Additional vac pumps for increasing the cooling cap at 2K –PC-aided control and data acq system for long-term operation 3.Operation of cryogenic system –Cool-down curves –Warm-up curves 4.Summary –2 wks for cool-down of S1-G CMs –Stable operation –Sufficient cooling cap for keeping cavities at 2K 10

9. HLRF Contributor: Fukuda, Nantista Editor: Toge 1.General description of HLRF at S1G 2.RDR-type configuration –Overview –Specs for modulators –Specs for klystrons –Specs for power distr. System Tree-type PDS Linear-type PDS Waveguide components –Variable tap-off (SLAC-type) –Variable power divider –Phase-shifter and reflector –Q-variation and power variation in PDS –Circulator HLRF studies at S1Global 11

9. HLRF (cont) 3.DRFS-type configuration –DRFS configuration and the purpose –Specs for modulators –Specs for DRFS klystrons –Specs PDS –Performance of DRFS HLRF at S1G 12

10. LLRF Contributor: Michizono Editor: Toge 1.System overview (Stage 1 + Stage 2 + DRFS ) … –use Katagiri’s paper at J.Acc Phys Soc Mtg 2011/8 2.Interlock system … –use Michizono’s IPAC paper 3.Detuning and QL measurements … –use Michizono’s IPAC paper 13

11. 1-cavity operation Contributor: Kirk Yamamoto, Yuri, Dennis, Rocco Editor: ALL 1.Mostly from SRF11 paper by K.Yamamoto – 2.Long-term operation with FNAL-style LFD compensation 14

12. Multi-cavity operation Contributpr: Kirk Yamamoto, Yuri, Rocco, Toshi Matsumoto Editor: ALL 1.Cavity operation aspects (Kirk Yamamoto) – –Simultaneous 4-cavity operation –Radiation vs accelearting field 2.LLRF aspects (Toshi Matsumoto) –Stability of vector sum control … use Matsumoto’s J.Acc Soc Mtg 2011/8 –Long-term operational stability … Michizono’s IPAC –Quench detection … Michizono’s IPAC 15

13. Cryomodule performance Contributor: Ohuchi, Peterson, Nakai Editor: Toge No outline has been received yet. Expect that Ohuchi comes up with the text on the basis of presentations at IPAC11 and elsewhere. 16

15. Alignment Contributor: Hayano, Tsuchiya Editor: Toge 1.Intro and motivation 2.Wire-measurements 3.Laser-monitor measurements 4.Summary 17

Summary Contributor: Hayano, Jim, Rocco Editor: ALL 18

Toge’s Comments Should be upbeat and positive but should be forthcoming and open in identifying the problems encountered and countermeasures contemplated into the future. Need to start writing. Should aim at: Some, if not complete, real text + illustrations + tables to exchange and share toward Granada GDE meeting. 19