IEEE MEDIA INDEPENDENT HANDOVER DCN: Title: Mesh Networks based on IEEE Date Submitted: May 7, 2009 Presented at IEEE session #32 in Montreal Authors or Source(s): Johanness Lessmann (NEC) Burak Simsek (Fraunhofer Institute) Abstract:

IEEE presentation release statements This document has been prepared to assist the IEEE Working Group. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE ’ s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE ’ s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE The contributor is familiar with IEEE patent policy, as outlined in Section 6.3 of the IEEE-SA Standards Board Operations Manual and in Understanding Patent Issues During IEEE Standards Development Section 6.3 of the IEEE-SA Standards Board Operations Manualhttp://standards.ieee.org/guides/opman/sect6.html#6.3

What are we trying to do? Enable optimization of heterogeneous carrier grade mesh networks – No L2 mesh (802.11s), simply support L3 mesh – Provide additional information to higher layers on mesh specific information such as neighborhood information and radio configuration – Use existing IEEE primitives and make minor enhancements – Respective scenarios of Carmen and solution approaches were presented in March meeting.

An Example Implementation of LinkNet Macha in Zambia Villages and the houses within those villages are scattered across a large land No wired communication No reliable power supply Limited hardware resources Limited budget Target: Deploy a wireless backhaul which is reliable enough to provide affordable connection throughout the country

An Example Implementation of LinkNet Macha in Zambia Approach: Develop a satellite based backhaul and use dvb + wimax + wifi where appropriate Develop individual “sites” for each relatively dense population and connect sites again through wireless media Enable flexibility through mesh since There is no dedicated bandwidth, which costs a lot (€5500 pro 1Mb/s) There is no reliable power supply, hence none of the nodes are considered as reliable Few technicians to deal with any kind of network and hardware problems – Extend the coverage to the entire country and then to others Mozambique, Tanzania, Kenya, Zimbabwe, South Africa, Malawi…

An example “Site” in Macha The network is evolving as much as the financial and technical conditions let

Back to Mesh and IEEE IEEE offers most of the mechanisms required for the described environment – Through event-, command- and information - services However, there are still points missing to enable the mesh backhaul Our approach is to extend the standard with the missing points

Examples of missing points Radio parameter configuration is essential for backhaul management Example: Radio_Get_Properties.response ( HardwareAddress, Technology, Directionality, Channels, TxPowerRange, SensitivityRange, MCSList, SchedulerProperties, AntennaProperties ) Other examples get/set current radio settings Another option is to use an extensive approach such as IEEE together with IEEE

Examples of missing points Per-flow handovers – Currently, only handover of terminals as a whole – Per-flow granularity might be desirable Flows are routed via different mesh paths to gateway Selective dropping of flows Exploiting multi-homing Resource-limited backhaul Several minor modifications here and there – LINK_TUPLE_ID instead of LINK_ID – Switch_Interface_Mode – LINK_DETECTED on both link endpoints – … proxy mode?

Conclusion Extend to configuration of mesh networks – Business demand (operators, vendors: DT, BT, ALU, NEC, Redline, StrixSystems) – Successful deployments already (Portland, Stockholm, UK wireless cities) – Much already there, minimum extension/effort – EU project dedicated to contribute (“free” man power, diverse input)