filename\location The Marketing Numbers VA7410VA7400VA K cache IOPs 28K cache IOPs 12K cache IOPs 11,000 IOPs8,500 IOPs3,400 IOPs 330MB/s180MB/s93MB/s

filename\location Detailed Performance* VA7100 HP14 (12/01) (15 drives) VA7400 HP15 (4/2002) (60 drives) VA7410 AXXX (7/2002) (60 drives) Cache Reads14,00028,00034,000 RAID 1+0 Random Reads (IOPs)3,4008,50011,000 Random Writes (IOPs)1,5304,1505,500 Sequential Reads (MB/s) Sequential Writes (MB/s) AutoRAID Random Reads (IOPs)2,8007,80011,000 Random Writes (IOPs)4751,5501,800 Sequential Reads (MB/s) Sequential Writes (MB/s) * Boise test; Performance Estimator numbers will be slightly different

filename\location Configuration Notes: XP256, Titan Firmware, 8GB CACHE, 16FC, 14 Luns/port, LOAD=8.

filename\location NOTE: These represent usable performance values with average response times of 25 ms or less.

filename\location NOTE: THESE ARE 100% CACHE VALUES

filename\location XP256 Titan Investigation Performance Maximums Foundational Components

filename\location XP256 Titan Investigation Performance Rules of Thumb (ROT) Note: The maximum disk performance is derived by taking the performance of a single raid group and dividing it by the number of disks in that raid group. A RAID1 group has 2 disks. A RAID5 group has 4 disks. All measurements were done with OPEN 8 emulation and with 1GB cache in the XP256. Response Times of 25 ms or less were factored in. rot

filename\location 2k random 60/40 (r/w) mix, and 64k sequential read workloads XP256 Titan Investigation Performance Rules of Thumb (ROT) rot

filename\location XP256 Titan Investigation Performance Rules of Thumb (ROT) 2k random 60/40 (r/w) mix, and 64k sequential read workloads rot