1 RPM/Belgium N.V. - Version MONOPUR GB MONOPUR ® INDUSTRY The heavy duty polyurethane concrete floor system for extreme service conditions

2 RPM/Belgium N.V. - Version MONOPUR GB Formulation  Monopur ® products are polyurethane mortars. The curing is a poly- addition reaction between a polyol and an isocyanate. The reaction product is called an urethane.  The higher the crosslinking, the higher the chemical resistance and thermal resistance. The reaction is influenced by temperature and on some of the Monopur ® products, humidity (H 2 O) can have some side reactions. O - R1 - OH + R2 - N = C = O => - R2 - N - C - O - R1 H POLYOL ISOCYANATE URETHANE

3 RPM/Belgium N.V. - Version MONOPUR GB Definition and advantages  High chemical resistance!  Resistant to hot water!  High mechanical resistance  Antislip characteristics  Non porous  Odourless  Resistant to constant moisture exposure A solvent free hybrid polyurethane mortar

4 RPM/Belgium N.V. - Version MONOPUR GB Application areas  Dairies  Meat and fish processing  Bakeries  Industrial kitchens  Cooking areas  Breweries  Areas with hot water  Areas with a load of organic and inorganic acids

5 RPM/Belgium N.V. - Version MONOPUR GB Application Instructions Preparation of the substrate  The substrate must be clean, free of oil and fats. Scarifying is the best preparation, because it opens the surface and enlarges the contact surface. Application of the Monopur ® Industry Primer  After mixing, the primer is applied with a consumption of about 350 – 500 gr/m². The wet primer is sprinkled with quartz for better workability of the mortar. After curing of the primer, the mortar is applied with a trowel or a rake in a thickness of 6-9 mm.

6 RPM/Belgium N.V. - Version MONOPUR GB Technical details Mechanical: after 4 days curing time  Compressive strength:60 N/mm 2  Flexural strength:16 N/mm 2  Tensile strength:7 N/mm 2  Thermal expansion coefficient:1,4 x / °C  Specific weight:2.19 kg/dm 3  Adhesion to concrete:2.7 N/mm 2  Finish according to BGIA  StandardR10 V-  Mandurax 0.3 – 0.7 mmR12 V4  Mandurax 0.6 – 1.5 mmR13 V8  Mandurax 1 – 2 mmR13 V10

7 RPM/Belgium N.V. - Version MONOPUR GB Technical details Chemical: after 7 days curing time  Inorganic and organic acids  Salt, alkalis, acids, fats, oil, water Thermal: after 7 days curing time  Service temperature at 9 mm thickness:-20°C to +90°C  Service temperature at 6 mm thickness:-20°C to +70°C  Resistance to continuous running hot water:max. +90°C

8 RPM/Belgium N.V. - Version MONOPUR GB Monopur ® Colours greenredbuffgreycream

9 RPM/Belgium N.V. - Version MONOPUR GB The Monopur ® Systems 1.MONOPUR ® Industry MortarSmooth6-9 mm 2.MONOPUR ® Industry MortarAntislip6-9 mm 3.MONOPUR ® Industry SLSmooth2-3 mm 4.MONOPUR ® Industry SL / BCAntislip4 mm 5.MONOPUR ® Industry SL 5 mmSmooth5 mm 6.MONOPUR ® Industry SL 5 mm BCAntislip7 mm

10 RPM/Belgium N.V. - Version MONOPUR GB Monopur ® Industry Mortar Monopur ® Industry Primer SMOOTH ANTISLIP Monopur ® Industry Topcoat Mandurax Monopur ® Industry Mortar Natural quartz 1.0 – 1.8 Monopur ® Industry Primer Between 6-9 mm

11 RPM/Belgium N.V. - Version MONOPUR GB 11 RPM/Belgium N.V. - Version MONOPUR GB Monopur ® Industry Mortar Monopur ® Industry Primer SMOOTH Between 6-9 mm 1. Monopur ® Industry Mortar - smooth

12 RPM/Belgium N.V. - Version MONOPUR GB 12 RPM/Belgium N.V. - Version MONOPUR GB Between 6-9 mmPriming MONOPUR ® Industry Primer:± – kg/m² Broadcast: natural quartz sand 1.0 – 1.8 mm± kg/m² Wearing layer MONOPUR ® Industry Mortar, 6 mm± kg/m² MONOPUR ® Industry Mortar, 9 mm± kg/m² Trowel applied coat, thickness 6-9 mm Slip resistance value R10 V- 1. Monopur ® Industry Mortar - smooth

13 RPM/Belgium N.V. - Version MONOPUR GB 13 RPM/Belgium N.V. - Version MONOPUR GB 2. Monopur ® Industry Mortar - antislip Monopur ® Industry Topcoat Mandurax Monopur ® Industry Mortar Natural quartz 1.0 – 1.8 Monopur ® Industry Primer Between 6-9 mm ANTISLIP

14 RPM/Belgium N.V. - Version MONOPUR GB 14 RPM/Belgium N.V. - Version MONOPUR GB 14 RPM/Belgium N.V. - Version MONOPUR GB Between 6-9 mmPriming MONOPUR ® Industry Primer:± – kg/m² Broadcast: natural quartz sand 1.0 – 1.8 mm± kg/m² 2. Monopur ® Industry Mortar - antislip

15 RPM/Belgium N.V. - Version MONOPUR GB 15 RPM/Belgium N.V. - Version MONOPUR GB 15 RPM/Belgium N.V. - Version MONOPUR GB 15 RPM/Belgium N.V. - Version MONOPUR GB 2. Monopur ® Industry Mortar - antislip Between 6-9 mmWearing layer MONOPUR ® Industry Mortar, 6 mm± kg/m² MONOPUR ® Industry Mortar, 9 mm± kg/m² Fully broadcast: Slip resistance value Mandurax R12 V4 0.3 – 0.7 mm ± 1.5 kg/m² Slip resistance value Mandurax R13 V8 0.6 – 1.5 mm ± 1.5 kg/m² Slip resistance value Mandurax R13 V10 1 – 2 mm ± 2.0 kg/m² Trowel applied coat, thickness 6-9 mm

16 RPM/Belgium N.V. - Version MONOPUR GB 16 RPM/Belgium N.V. - Version MONOPUR GB 16 RPM/Belgium N.V. - Version MONOPUR GB 16 RPM/Belgium N.V. - Version MONOPUR GB 16 RPM/Belgium N.V. - Version MONOPUR GB 2. Monopur ® Industry Mortar - antislip Between 6-9 mmTopcoat Wearing layer broadcasted with: Mandurax 0.3 – 0.7 mmMONOPUR ® Industry Topcoat0.6 – 0.8 kg/m² Mandurax 0.6 – 1.5 mmMONOPUR ® Industry Topcoat0.6 – 0.8 kg/m² Mandurax 1 – 2 mmMONOPUR ® Industry Topcoat0.6 – 0.8 kg/m²

17 RPM/Belgium N.V. - Version MONOPUR GB Monopur ® Industry SL Monopur ® Industry Primer SL System Smooth SL /BC System Antislip Monopur ® Industry Topcoat Mandurax or natural quartz Monopur ® Industry SL/BC Natural quartz 0.4 – 0.8 Monopur ® Industry Primer 2-3 mm 4 mm Natural quartz 0.4 – 0.8

SL SYSTEM 18 RPM/Belgium N.V. - Version MONOPUR GB 18 RPM/Belgium N.V. - Version MONOPUR GB 3. Monopur ® Industry SL - smooth Monopur ® Industry SL Monopur ® Industry Primer 2-3 mm Natural quartz 0.4 – 0.8

19 RPM/Belgium N.V. - Version MONOPUR GB 19 RPM/Belgium N.V. - Version MONOPUR GB 19 RPM/Belgium N.V. - Version MONOPUR GB 19 RPM/Belgium N.V. - Version MONOPUR GB Priming MONOPUR ® Industry Primer:± – kg/m² Broadcast: natural quartz sand 0.4 – 0.8 mm± kg/m² 3. Monopur ® Industry SL - smooth 2-3 mm Wearing layer MONOPUR ® Industry SL, 2 mm4 - 5 kg/m² Trowel applied coat, thickness 2 mm

20 RPM/Belgium N.V. - Version MONOPUR GB 20 RPM/Belgium N.V. - Version MONOPUR GB 4. Monopur ® Industry SL/BC - antislip Monopur ® Industry Topcoat Mandurax or natural quartz Monopur ® Industry SL/BC Natural quartz 0.4 – 0.8 Monopur ® Industry Primer 4 mm SL/BC SYSTEM - ANTISLIP

21 RPM/Belgium N.V. - Version MONOPUR GB 21 RPM/Belgium N.V. - Version MONOPUR GB 21 RPM/Belgium N.V. - Version MONOPUR GB 21 RPM/Belgium N.V. - Version MONOPUR GB 4 mmPriming MONOPUR ® Industry Primer:± – kg/m² Broadcast: natural quartz sand 0.4 – 0.8 mm± kg/m² 4. Monopur ® Industry SL/BC - antislip

22 RPM/Belgium N.V. - Version MONOPUR GB 22 RPM/Belgium N.V. - Version MONOPUR GB 22 RPM/Belgium N.V. - Version MONOPUR GB 22 RPM/Belgium N.V. - Version MONOPUR GB 22 RPM/Belgium N.V. - Version MONOPUR GB Wearing layer MONOPUR ® Industry SL/BC, 2 mm4-5 kg/m² Fully broadcast: Slip resistance value Mandurax R12 V4 0.3 – 0.8 mm ± 3.5 kg/m² Slip resistance value Natural quartz sand R13 V6 0.7 – 1.2 mm ± 3.5 kg/m² Slip resistance value Mandurax R13 V8 0.6 – 1.5 mm ± 3.5 kg/m² 4. Monopur ® Industry SL/BC - antislip 4 mm

23 RPM/Belgium N.V. - Version MONOPUR GB 23 RPM/Belgium N.V. - Version MONOPUR GB 23 RPM/Belgium N.V. - Version MONOPUR GB 23 RPM/Belgium N.V. - Version MONOPUR GB 23 RPM/Belgium N.V. - Version MONOPUR GB 23 RPM/Belgium N.V. - Version MONOPUR GB Topcoat Wearing layer broadcasted with: Quartz 0.7 – 1.2 mm MONOPUR ® Industry Topcoat0.6 – 0.8 kg/m² 4. Monopur ® Industry SL/BC - antislip 4 mm

24 RPM/Belgium N.V. - Version MONOPUR GB Monopur ® Industry SL 5 mm Monopur ® Industry Primer SL System Smooth SL / BC 5 mm Antislip Monopur ® Industry Topcoat Mandurax Monopur ® Industry SL 5 mm Natural quartz Monopur ® Industry Primer 5 mm 7 mm Natural quartz

SL 5 mm 25 RPM/Belgium N.V. - Version MONOPUR GB 25 RPM/Belgium N.V. - Version MONOPUR GB 5. Monopur ® Industry SL 5 mm - smooth Monopur ® Industry SL 5 mm Monopur ® Industry Primer 5 mm Natural quartz 0.7 – 1.2

26 RPM/Belgium N.V. - Version MONOPUR GB 26 RPM/Belgium N.V. - Version MONOPUR GB 26 RPM/Belgium N.V. - Version MONOPUR GB 26 RPM/Belgium N.V. - Version MONOPUR GB 26 RPM/Belgium N.V. - Version MONOPUR GB Priming MONOPUR ® Industry Primer:± – kg/m² Broadcast: natural quartz sand 0.7 – 1.2 mm± kg/m² 5. Monopur ® Industry SL 5 mm - smooth 5 mm Wearing layer MONOPUR ® Industry SL, 5 mm± 10 kg/m² Trowel applied coat, thickness 5 mm

27 RPM/Belgium N.V. - Version MONOPUR GB 27 RPM/Belgium N.V. - Version MONOPUR GB 6. Monopur ® Industry SL 5 mm BC - antislip Monopur ® Industry Topcoat Mandurax Monopur ® Industry SL 5 mm Natural quartz 0.7 – 1.2 mm Monopur ® Industry Primer 7 mm SL 5 mm BC

28 RPM/Belgium N.V. - Version MONOPUR GB 28 RPM/Belgium N.V. - Version MONOPUR GB 28 RPM/Belgium N.V. - Version MONOPUR GB 28 RPM/Belgium N.V. - Version MONOPUR GB 7 mmPriming MONOPUR ® Industry Primer:± – kg/m² Broadcast: natural quartz sand mm± kg/m² 6. Monopur ® Industry SL 5 mm BC - antislip

29 RPM/Belgium N.V. - Version MONOPUR GB Wearing layer MONOPUR ® Industry SL 5 mm± 10 kg/m² Fully broadcast: Slip resistance value Mandurax R12 V4 0.3 – 0.7 mm ± 4.0 kg/m² Slip resistance value Mandurax R13 V6 0.6 – 1.5 mm ± 4.0 kg/m² Slip resistance value Mandurax R13 V8 1 – 2 mm ± 4.0 kg/m² 7 mm 6. Monopur ® Industry SL 5 mm BC - antislip Self levelling coat, thickness 5 mm

30 RPM/Belgium N.V. - Version MONOPUR GB 6. Monopur ® Industry SL 5 mm BC - antislip Topcoat Monopur ® Industry Topcoat broadcasted with: Mandurax 0.3 – 0.7 mm0.6 – 0.8 kg/m² Mandurax 0.6 – 1.5 mm0.6 – 0.8 kg/m² Mandurax 1 – 2 mm0.6 – 0.8 kg/m² 7 mm

31 RPM/Belgium N.V. - Version MONOPUR GB Remark! Due to HIGH CROSS-LINKING (high chemical and high temperature resistance) IT IS NECESSARY TO MAKE GROVES ON THE WALL, DRAINAGE SYSTEM AND COVES. MECHANICAL ANCHORING OF THE MORTAR. Due to HIGH CROSS-LINKING (high chemical and high temperature resistance) IT IS NECESSARY TO MAKE GROVES ON THE WALL, DRAINAGE SYSTEM AND COVES. MECHANICAL ANCHORING OF THE MORTAR.

32 RPM/Belgium N.V. - Version MONOPUR GB References

33 RPM/Belgium N.V. - Version MONOPUR GB

34 RPM/Belgium N.V. - Version MONOPUR GB

35 RPM/Belgium N.V. - Version MONOPUR GB

36 RPM/Belgium N.V. - Version MONOPUR GB

37 RPM/Belgium N.V. - Version MONOPUR GB

38 RPM/Belgium N.V. - Version MONOPUR GB

39 RPM/Belgium N.V. - Version MONOPUR GB

40 RPM/Belgium N.V. - Version MONOPUR GB

41 RPM/Belgium N.V. - Version MONOPUR GB

42 RPM/Belgium N.V. - Version MONOPUR GB

43 RPM/Belgium N.V. - Version MONOPUR GB

44 RPM/Belgium N.V. - Version MONOPUR GB

45 RPM/Belgium N.V. - Version MONOPUR GB