Prof R T KennedyEMC & COMPLIANCE ENGINEERING 1 EET 422 EMC & COMPLIANCE ENGINEERING

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 2

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 3 NEW APPROACH CE MARKING DIRECTIVES EMC Directive Low Voltage Directive Machinery Directive

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 4 EU Council Decision 90/683/EEC 13 December 1990 MODULES for CONFORMITY ASSESSMEMT RULES for EC MARK CE MARKING WHERE FROM ?

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 5 EU Council Decision 93/465/EEC 22 July 1993 EC MARK MARKING

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 6 CE MARKING WHAT IS IT ? a declaration by the manufacturer that the apparatus (product) meets all the appropriate provisions of the relevant legislation implementing certain European Directives

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 7 CE MARKING WHAT IS IT ?

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 8 CE MARKING WHAT IS IT ? PRODUCT FREE CIRCULATION IN MEMBER STATES (EU SINGLE MARKET) internal market for products aids competition

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 9 CE MARKING BENEFITS pre CE MARKING multiple conflicting national compliance systems post CE MARKING safer products enhanced products enhanced manufacturing processes

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 10 more than 1 APPLICABLE DIRECTIVE ? ONLY 1 CE MARKING implies product complies with ALL applicable directives EU Declaration of Conformity per Directive

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 11 EMC DIRECTIVE LOW VOLTAGE DIRECTIVE MACHINERY DIRECTIVE

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 12 CE MARKING LOGO CE Conformité Européenne European Conformity

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 13 WHO PUTS CE MARKING ON ? PRODUCT MANUFACTURER or AUTHORISED REPRESENTATIVE

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 14 CE MARKING LOGO

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 15 WHEN CAN CE MARKING BE PUT ON ? after DECLARATION of Conformity after CONFORMITY IS ESTABLISHED based on the manufacturer’s chosen assessment procedure after APPARATUS FINAL INSPECTION

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 16 WHERE TO PUT CE MARKING ? on the product or on the packaging or in manuals or other supporting literature warranty

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 17

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 18 CE MARKING APPEARANCE ?

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 19 GENERAL PROCESS TO CE MARKING determine the EU Directive applicable assess apparatus “essential requirements” determine the CE conformity assessment procedure applicable select appropriate conformity assessment module(s) determine EU Harmonised Standards applicable to apparatus ensure the appparatus is in compliance all EU Directives, Standards and other requirements

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 20 GENERAL PROCESS TO CE MARKING select a notified body if required appoint an authorised representative consider EU recycling & disposition requirements prepare appropriate technical documentation test reports and data sets prepare the official Declaration of Conformity for CE marking place CE marking on the product or packaging or documentation as applicable

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 21 CE MARKING of APPARATUS AMPLIFIER TUNER CD PLAYER CASSETTE DECK

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 22 APPARATUS (FINISHED PRODUCTS) may contain bought-in sub-assemblies computer boards computers power supplies PLCs motor drives

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 23

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 24

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 25 MACHINE TOOL PLCs + DRIVES

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 26

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 27

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 28 CE + CE = CE ?

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 29

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 30 +

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 31 CE MARKING LEGAL ASPECTS under EU law the company that places a product on the market or into service is responsible for CE marking manufacturer distributor agent in most cases the physical manufacturer is ultimately responsible

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 32 OFFENCE to AFFIX CE MARKING to apparatus that does NOT comply with an APPLICABLE DIRECTIVE to apparatus NOT covered by a DIRECTIVE

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 33 CE MARKING LEGAL ASPECTS NON-compliant products may be pulled out of service permanently banned from service permanently banned from European markets

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 34 CE MARKING LEGAL ASPECTS manufacturers and suppliers may incur criminal penalties \and/or civil penalties

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 35 CE MARKING ENFORCEMENT enforced at a NATIONAL level Customs Officials Market Surveillance Authorities The Court

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 36 CE LEGAL ASPECTS CE MARKING ENFORCEMENT market surveillance interference complaints trade fairs & demonstrations Notified BODY

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 37 DATE OTHER MARKINGS

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 38 Machinery Directive (98/37/EC) year of construction under the CE marking Low Voltage Directive (73/23/EEC) EU Declaration of Conformity last two digits of the year CE affixed EMC Directive 89/336/EEC) ? OTHER MARKINGS

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 39 EMC DIRECTIVE 89/336/EEC) ? OTHER MARKINGS

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 40 CE MARKING is NOT intended to serve commercial purposes an indication of origin or that the product was manufactured in the EU Community made in UK a safety symbol

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 41 CE MARKING is NOT a quality indicator the 'essential protection requirements' of the Directive calls for "fitness for purpose"  some measure of quality CE Marking is for many consumers a Symbol of Quality!

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 42 CE Conformité Européenne European Conformity

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 43 OTHER MARKINGS APPARATUS may bear additional markings & marks provided they fulfil a different function from CE marking do not cause confusion with CE marking do not reduce CE marking legibility & visibility

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 44 usually constructed from finished products & finished apparatus computers telecommunications equipment instrumentation : control equipment : machinery fulfil the requirements of the Directive be installed according to installation instructions according to good engineering practice ensure installation’s satisfactory EMC properties

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 45

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 46 HAVE TO COMPLY with the EMCD documentation of practices to be kept on file as long as installation is in operation Member State defines responsibility for FIXED INSTALLATION COMPLIANCE

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 47 NO conformity assessment NO CE marking Member State defines responsibility for FIXED INSTALLATION COMPLIANCE

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 48 CE marking increasingly covering environmental issues

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 49 PACKAGING & PACKAGING WASTE DIRECTIVE 2002/96/EC 27 January 2003

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 50 large household appliances small household appliances IT and telecommunications equipment consumer equipment (audio/visual) lighting equipment (domestic luminaires) electrical and electronic tools (except large industrial) toys leisure and sports equipment automatic dispensers

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 51

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 52 REMOVAL OF HAZARDOUS SUBSTANCES DIRECTIVE 2002/95/EC 1 July 2006

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 53

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 54

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 55 SAFE USAGE of CHEMICALS REGULATION EC 1907/ June 2007

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 56

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 57 ECO DESIGN of ENERGY USING PRODUCTS DIRECTIVE 2005/32/EC 6 July 2005

Prof R T KennedyEMC & COMPLIANCE ENGINEERING 58 CE everywhere ?