1 07-Oct-2012 «BE-RF-PM» Experiments on the Material Samples of the CLIC Two-Beam Module Supporting System: PHASE 2 Nick Gazis 1

2 07-Oct-2012 CLIC Module Working Group «BE-RF-PM» Contents 1.Experimental Outline 2.Material Testing (Phase 1) 3.Material Testing (Phase 2) 4.Actions & Schedule 2

3 07-Oct-2012 CLIC Module Working Group «BE-RF-PM» 3 Experimental Outline Phase 1: 5-13 February June 2011 Phase 1: 5-13 February June 2011 Study outcome: Results Analyzed Phase 2:  1-12 October 2012  (March – June 2013) Phase 2:  1-12 October 2012  (March – June 2013) Study outcome: The results are expected to be: (1)simulated, (2)processed and (3)compared CLIATLSS0076, CLIATLSS0077, CLIATLSS0078, CLIATLSS0079 Phase 3 (2013-…) Non-destructive testing Study outcome: To be discussed Achieved Experiments NameType Pilot radio-activationRadiation Testing 3-Point BendingMechanical Testing Uniaxial Compression TestingMechanical Testing Indicative samples Achieved Experiments NameType Large Sample Neutron Activation Analysis Radiation Testing Radiation FatigueRadiation Testing 3-Point BendingMechanical Testing Tensile TestingMechanical Testing

4 07-Oct-2012 CLIC Module Working Group «BE-RF-PM» 4 EDMS References & EDMS References &

5 07-Oct-2012 CLIC Module Working Group «BE-RF-PM» 5 Material Testing for Phase 1 Phase 1: 5-13 February June 2011 Phase 1: 5-13 February June 2011 Study outcome: Results Analyzed Achieved Experiments NameType Pilot radio-activationRadiation Testing Three Point BendingMechanical Testing Uniaxial Compression TestingMechanical Testing Indicative samples Girder material samples radiation testing at NCSR Demokritos (GR) on February 2011 I.k Girder material samples mechanical testing at NTUA (GR) on June 2011

6 07-Oct-2012 CLIC Module Working Group «BE-RF-PM» 6

7 7 Material Testing for Phase 2 Mechanical Testing Tensile Testing SiC samples: i.4 samples of CLIATLSS0076 ii.4 samples of CLIATLSS0077 EPUMENT SAMPLES: i.4 samples of CLIATLSS0078 ii.4 samples of CLIATLSS0079 NO RADIATION (reference specimens) Three Point Bending Tensile Testing SiC samples: i.4 samples of CLIATLSS0076 ii.4 samples of CLIATLSS0077 EPUMENT SAMPLES: i.4 samples of CLIATLSS0078 ii.4 samples of CLIATLSS0079 NEUTRON RADIATION Three Point Bending Tensile Testing SiC samples: i.4 samples of CLIATLSS0076 ii.4 samples of CLIATLSS0077 EPUMENT SAMPLES: i.4 samples of CLIATLSS0078 ii.4 samples of CLIATLSS0079 PROTON RADIATION Three Point Bending Radiation TestingSamples Group A Group B Group C *Optionally: Mechanical Impact testing on one (1) spare sample of each type

8 07-Oct-2012 CLIC Module Working Group «BE-RF-PM» 8 Types of Specimen Specimen SB (=SiC Bars) Height=90 mm, Thickness=6 mm CLIATLSS0077 Specimen SD (=SiC Dog-bones) Height=70 mm, Thickness=6 mm CLIATLSS0076 Specimen ED1 (=Epument Disks batch 1) D=100 mm, Thickness=30 mm Specimen ED1 (=Epument Disks batch 1) D=100 mm, Thickness=30 mm CLIATLSS0078 Specimen ED2 (=Epument Disks batch 2) D=200 mm, Thickness=60 mm Specimen ED2 (=Epument Disks batch 2) D=200 mm, Thickness=60 mm CLIATLSS0079 Dedicated specimen design for tensile strength testing

9 07-Oct-2012 CLIC Module Working Group «BE-RF-PM» 9 Reference samples and simulations Acoustic sensors Strain gages Neutron Activation simulation: in progress Size Effect: Under investigation Size Effect: Under investigation Cracking Patterns: under investigation Cracking Patterns: under investigation *Data input from Sophie Mallows

10 07-Oct-2012 CLIC Module Working Group «BE-RF-PM» 10 Actions & Schedule 1.Design, procurement and delivery of samples for Phase 1 : Finished 2.Irradiation testing (neutron radio-activation) for Phase 1 (at NCSR Demokritos): Finished 3.Mechanical testing (UCT 1 and 3PB 2 ) for the Phase 1 (at NTUA): Finished 4.Design, procurement and delivery of samples for Phase 2: Finished 5.Neutron activation simulation (with Fispact 3 ) for Phase 2 (at NCSR Demokritos): preliminary results available on cw48 6.Mechanical testing (BDT 4 ) for the reference samples of Phase 2 (at NTUA): preliminary results available on cw49 7.Irradiation testing for the Phase 2: March-April 2013 (to be confirmed) 8.Mechanical testing for the irradiated samples of Phase 2: May-June 2013 (to be confirmed) 1.Design, procurement and delivery of samples for Phase 1 : Finished 2.Irradiation testing (neutron radio-activation) for Phase 1 (at NCSR Demokritos): Finished 3.Mechanical testing (UCT 1 and 3PB 2 ) for the Phase 1 (at NTUA): Finished 4.Design, procurement and delivery of samples for Phase 2: Finished 5.Neutron activation simulation (with Fispact 3 ) for Phase 2 (at NCSR Demokritos): preliminary results available on cw48 6.Mechanical testing (BDT 4 ) for the reference samples of Phase 2 (at NTUA): preliminary results available on cw49 7.Irradiation testing for the Phase 2: March-April 2013 (to be confirmed) 8.Mechanical testing for the irradiated samples of Phase 2: May-June 2013 (to be confirmed) UCT 1 : Uniaxial Tensile Testing 3PB 2 : Three Point Bending FISPACT 3 : dedicated software for activation simulations BDT 4 : Brazilian Disc Testing UCT 1 : Uniaxial Tensile Testing 3PB 2 : Three Point Bending FISPACT 3 : dedicated software for activation simulations BDT 4 : Brazilian Disc Testing