PREZENTACJA WSPÓŁFINANSOWANA PRZEZ UNIĘ EUROPEJSKĄ ZE ŚRODKÓW EUROPEJSKIEGO FUNDUSZ SPOŁECZNEGO W RAMACH PROJEKTU MBM – KIERUNEK ZAMAWIANY

MICHAL SKAKUJ 7/28/2015Michal Skakuj PH/DT Internship final presentation June-July 2015

7/28/2015Michal Skakuj PH/DT During my internship I participated in the 3D design of the test stand for the validation of the 3M NOVEC 649 as future replacement of the C 6 F 14 refrigerant in the ATLAS cooling system. Main tasks: - Measurement of an existing frame and creation of the 3D model in Catia - Design of the 3D model pipeline - 3D modelling of mechanical components - Assembly of the components and the pipeline into the rack - Prepare 2D construction drawings

7/28/2015Michal Skakuj PH/DT Measurement of an existing frame and prepare the 3D model in Catia.

7/28/2015Michal Skakuj PH/DT Next step was introduction to the Process and Instrumentation Diagrams (P&ID) test bench. During my internship we had various version, below is the latest which is being base for 3D model.

7/28/2015Michal Skakuj PH/DT Design of 3D pipeline In the beginning pipeline and components was created as a simple shapes to see how much free space we have. In the course of time the model was improving.

7/28/2015Michal Skakuj PH/DT Part list:

7/28/2015Michal Skakuj PH/DT Based on part list I replaced the simple shapes by 3D models. Some of them was obtained from companies support and some was modeled by me. MECA-INOX PS4 TYPE 3-PIECE BALL VALVE

7/28/2015Michal Skakuj PH/DT Components modeled by me Pressure transmitter DMP 331 Pressure regulating valve with gauge

7/28/2015Michal Skakuj PH/DT Connection list Connection between components and pipeline was very important and time-consuming task. Finally thanks to collaboration with Dina Giakoumi and Piotr Dziurdzia we have created the connection list.

7/28/2015Michal Skakuj PH/DT Examples of connections : Swagelok union tee Swagelok tube fitting Welded connection Straight socket GAZ- NTP thread Tube fitting adapter Flange connection

7/28/2015Michal Skakuj PH/DT Final assembly

7/28/2015Michal Skakuj PH/DT Final assembly Manifold ⌀ 6mm, ⌀ 8mm, ⌀ 10mm

7/28/2015Michal Skakuj PH/DT 2D connection drawing One of the last tasks was creating 2D construction drawings with details to the connections. The 2D assembly drawings that will explain step by step the assembly procedure.

7/28/2015Michal Skakuj PH/DT Still to do : Add support for pipeline and tank. Select few missing components and create connection between them and pipeline.

7/28/2015Michal Skakuj PH/DT THANK YOU FOR YOUR ATTENTION !