1 IEEE MEDIA INDEPENDENT HANDOVER DCN: Title: Figures of MIH reference model for and Date Submitted: Jan, 2008 Presented at IEEE Ad hoc meeting Feb at Santa Clara Authors or Source(s): H Anthony Chan Abstract: Updates to figures showing MIH reference model for and (This is analogous to Figure-1 Update based on discussions with Tony Jeffree)

2 IEEE presentation release statements This document has been prepared to assist the IEEE Working Group. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE The contributor is familiar with IEEE patent policy, as outlined in Section 6.3 of the IEEE-SA Standards Board Operations Manual and in Understanding Patent Issues During IEEE Standards Development Section 6.3 of the IEEE-SA Standards Board Operations Manualhttp://standards.ieee.org/guides/opman/sect6.html#6.3

3 MIH reference model for In Figure 7 MIH reference model for IEEE in P802.21d9.0, changes are proposed for following reasons: The MIHF block need not touch the PHY layer block. It only has interfaces to LLC, MAC, and MSGCF, but not PHY The interface between MIHF and MSGCF is not too straightforward to see from the current figure, especially when the MIHF block is not touching the MSGCF block The interface between MIHF and MAC is also not too straightforward to see from the figure. Correct the acronym to MSGCF to be consistent with that used in P802.11u

4 MIH reference model for existing Figure 7 in P802.21d9.0

5 MIH reference model for The new figure 7 (next slide) is an attempt to improve the existing Figure 7. In this figure MIHF is shown adjacent to MAC, LLC, L3, and MSGCF to each of which it interfaces through a SAP. It shows MAC_SAP between MAC and LLC as well as between MAC and MIH. It shows LSAP between LLC and L3 as well as between LLC and MIH.

6 MIH reference model for New Fig.7 to replace Fig. 7 in P802.21d9.0 MIH Function (ES, IS, CS) MAC state generic convergence function Station Management entity MAC layer management entity MAC LLC Layer 3 and higher Mobility protocol (L3MP) MAC_SAP LSAP PLCP and PMD sublayers PHY_SAP Physical layer management entity MLME-PLME_SAP MSGCF_SAP MIH_SAP PLME_SAP MLME_SAP MSGCF-SME_SAP

7 MIH reference model for In Figure 8 MIH reference model for IEEE in P802.21d9.0, changes are proposed for following reasons: The dotted line in the current figure runs between CS_SAP and MIH_SAP. It is not too straightforward to understand this as showing CS_SAP between CS and MIHF, especially when the MIHF block is not touching the CS block.

8 MIH reference model for Existing Figure 8 in P802.21d9.0

9 MIH reference model for The new Figure 8 in the next slide is an attempt to improve the existing Figure 8. It is showing MIHF adjacent to mobility entity, CS, and L3MP, to each of which it interfaces through a SAP. It shows CS_SAP between CS and L3 as well as between CS and MIH.

10 MIH reference model for New Fig.8 to replace Fig. 8 in P802.21d9.0 MAC Common Part Sublayer Security sublayer management entity Service specific convergence sublayer CS Layer 3 and higher mobility protocol (L3MP) MAP_SAP MIH Function (ES, IS, CS) MIH_SAP CS_SAP M_SAPC_SAP PHY PHY_SAP