NSQP MEETING

Valery AKHNAZAROV January 20th 2011 Laminate the NTC-HV and PS harnesses Assembly Name: PP1 Penetration Tape Parts requires: ISP HV –NTC PCB ISP PS PCB Tools/Consumables: 1. supporting block for NTC-HV 2. supporting block for PS 3. alcohol 4. roller 5. 3M™ VHB™ Tape 25mm 6. Kapton (thickness 0,17mm) 7. Kapton Tape 25mm

Valery AKHNAZAROV January 20th 2011 Laminate the NTC-HV and PS PSB 1.Inspect HV PCB visually. 2.Remove label. 3.Clean PCB surface with alcohol. 4.Attach 3M™ Tape (See diagram) (use a roller). 5.Attach Kapton (use a roller) 6.Attach 3M™ Tape (See diagram) (use a roller.) 7.Install the HV PCB in the supporting block. 8.remove the foil and set the following PCB. 9.Follow task from 2 to 8. 3M™ Tape Kapton

Valery AKHNAZAROV January 20th 2011 Laminate the NTC-HV and PS PSB 1.Inspect PS PCB visually. 2.Remove label. 3.Clean PCB surface with alcohol. 4.Attach 3M™ Tape (See diagram) (use a roller). 5.Attach Kapton Tape 6.Attach 3M™ Tape (See diagram) (use a roller.) 7.Install the PS PCB in the supporting block. 8.Remove the foil and set the following PS PCB. 9.Follow task from 2 to 8. 3M™ Tape Kapton Tape