1 Equation revision for Frequency Partitioning in DL/UL PHY IEEE Presentation Submission Template (Rev. 9) Document Number: IEEE C802.16m-09/0887r1 Date Submitted: Source: Yu-Tao Hsieh, Chia-Lung Tsai, Pang-An Ting ITRI Hsi-Pin Ma, Yeong-Luh Ueng, Jen-Ming Wu, Yuan-Hao Huang NTHU Venue: IEEE Session #61, Cairo. Base Contributions: None Re: IEEE C802.16m-09/0020 “Call for Contributions on Project m Amendment Working Document (AWD) Content”, Category: AWD comments / Area: Chapter (DL-PHY) and (UL-PHY) “Comments on AWD DL-PHY and UL PHY” Purpose: Discussion and Approval Notice: This document does not represent the agreed views of the IEEE Working Group or any of its subgroups. It represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE Patent Policy: The contributor is familiar with the IEEE-SA Patent Policy and Procedures: and. Further information is located at and.
2 Motivation In the current AWD, the size of miniband K MB, FPi in each FP i is determined based on FPCT and FPS, as shown in (181) and (225) FPS is not defined in the whole text Only FPS i is defined A more general and simpler equation is proposed to fix the problem Apply the updated equation for both DL and UL
3 Proposed text #1 Replace IEEE m-09/0010r1a, pp. 38, line 6, eqn. (181) by the following text
4 Proposed text #2 Replace IEEE m-09/0010r1a, pp. 99, line 1, eqn. (225) by the following text