Jewelry 1 Project # 3. Soldering Cutting Filing Sawing Burnishing Pushing Sanding.

Slides:

Advertisements

Similar presentations

Bardia Baheri Rotary High Voltage Motor Physics project.

Advertisements

GATHER THE FOLLOWING SUPPLIES:

Farmall Flat Back Lamp Replacement By John Papay North Royalton, OH.

Slab constructed cup Flatten a lump of clay into a long shape as you will be rolling out a slab long enough to wrap around a tube form. Note: finished.

Stamped Slab Vessel with Handle(s). Create a paper template where you plan how you will use the stamps you have created. It will indicate the height and.

Frame Assembly Produced by Ed Latimer, Team 476 Ken York, Team 476 Ron Markum, Team

Peppermill Demo Bayou Woodturners Demonstrator Jim Shackelford November 2009.

Cutting With a Jeweler’s Saw

Chromatography Lab. Chromatography The separation of components of a mixture. Paper Chromatography consists of placing a spot of color from something.

Forming and Forging Mrs. Jones’s Classes.

How to Make a Hot Air Balloon

Dome Ring. Determine your ring size. Sizer should slide on easily but be hard to get off. A dash – means a half size.

Using: Sterling Silver & Semi-precious stones. What is a cabochon stone? A genuine, natural stone Dome shaped (not faceted) Often oval, can be round or.

Name:__________________________ INSTRUCTIONS: Do not lose this packet! It is required at the end of the project to receive credit. Base Plate Hasp Hinge.

Fremont Style.  10 gauge Nickel, half round U se a length of nickel wire that matches your desired ringsize + a little extra for sanding away the cutter.

Bricking the Mason 2x4 Evaporator

Chapter 10 Constructions.

Ocean Science Data Based Lesson A Guide to Construction of Materials for Ships, Ocean and Satellites (S.O.S.) Paper version This guide is intended to be.

SEACORK INSTALLATION ON A CATAMARAN The first step is to make templates of all corner pieces to be cut from sheet material, which will be used for border.

Manufacturing Assembly Plan P Mechanical Spine Test Platform.

HOT AIR BALLOON CONSTRUCTION A LOOK AT HOW HEAT IS TRANSFERRED IN THE ATMOSPHERE.

Basic Soldering Tips and Techniques! RM1B. Before starting the construction of a soldering project, be sure that your soldering iron tip is in good shape!

CONSTRUCTING A FIVE CABIN LATRINE

 Desired metal: U se a length of metal that matches your desired ring size + a little extra for sanding away.  Silver solder Y ou need a piece of silver.

Universal Guide Installation Please read and understand the installation instructions fully before proceeding.

Project # 2 Ring bands. Soldering Filing texture stamping cleaning Annealing sanding Bending Polishing/sandblasting.

How to Print Picture steps can teach you how to print.

PLAN #PartProcessTools and equipmentQuality controlSafety *Aprons must be worn is ALL stages of manufacture Tim e 1 MDF base Mark out on MDF piece Pencil,

Day and Night by M.C. Escher

Advanced Scroll Ring. Designing the ring Decide on your pattern. You can do one from the previous slide, or you can come up with your own design. Determine.

Apeshit Mods + kitsch-bent > LEDx3 ver. 1 3/31/2011 kitsch-bent.com.

Building a clock PART 1: The Body. Gathering materials  The wood that you will be using is called Maple. You can identify it by knowing that it is: Heavy.

Basic Screen Printing Procedures for T-Shirts GOP_5-2 Screen Printing.

Handout from Clinic Conducted by Bernard Kempinski at several NMRA conventions

The Construction of Vertical Evolution Nigel Howe.

BE PREPARED TO TAKE A FEW NOTES TODAY… Pick up the pink sheet at the front.

Sumo Robot. Materials Part NameQty 3-9 volt Motor2 Gear sets2 Wheels4 Axles 4 Base1 Straws2 Switches2 Bolts & Nuts4 Hook up wire15'

Soldering. Soldering is a way of attaching two pieces of metal by melting a third piece of metal (called solder) to join them. The solder will have a.

Teardrop Octagon S Ring Ring Ring. Teardrop Ring This is the easiest of the rings You must use sterling silver for this one—nickel silver will not work!

Patterned Band Ring. Select your metal You can use a base metal, which includes nickel silver, brass, or copper. They are only 25 cents, so if you accidentally.

Left side Right side Note pad Roll block. The Plan.

Basic Scroll Ring: Requirements One continuous piece of wire—do not cut into pieces! Soldered in one or more places At least two scrolls/bends/turns, using.

Copper Wire Earrings Level 3 Aiden Church. Buying Wire I bought 20 inches of copper, thinking that I would make 6 rings total with 4”, 3”, and 2”. What.

Creating a Sun Catcher. Choose a Pattern For this project, you will need to choose a pattern from my Sun Catcher collection for Glass Eye. You will find.

Making a Excalibur letter opener Prepared for Ken Jeberg By Ken Jeberg Trades Technology Teacher Education.

Copper Name Bracelet Very dramatic, huh? Apparently, this is the cover to a book. Conveniently named.

TAKE NOTE ON THE ORDER OF PROCEDURE FOR CONSTRUCTION OF THE LAMINATE COUNTERTOP. Countertop Procedures.

Tiffany Ring. Design & solder your ring Using skills from your last unit, create a really awesome ring with a spot for your setting. SEE THE IDEAS ON.

Square Plant Stand. TOOL: Radial Arm Saw NEXT STEP: Surface Planer RESULTS: Rough size pieces for 4 Legs. 33” long PROJECT Square Plant Stand PART Legs.

BEZEL SETTING. THE DIME AND PENNY.

Wire Practice Worksheet Exercise 3A. Helpful Hints for Wire Working: Use the correct shaped pliers for the bend or turn you’re planning. Be sure not to.

KIRSTY WEIGHILL.  COVER THE UNPROTECTED SIDE/S OF YOUR PLASTIC WITH MASKING TAPE  THE REASON WE COVER IT WITH MASKING TAPE IS :  FOR PROTECTION THROUGHTOUT.

"Cryptex Style" Maze Coin Puzzle

MATTING. REMEMBER… Matt Board is expensive. Measure twice, cut once. Lay your matt board on something clean… on newsprint for example, NOT the floor!

Basic metalsmith techniques for jewelry. Metalsmithing is the art of manipulating metal to create functional and ornamental works.

Stone Setting Bezel Setting Your Ring. 1. Measure the bezel Take a piece of paper and wrap it around the edge of your stone to the EXACT fit. Mark it.

Balsa Bridge Construction

How to Cover Your Book.

ART HIGH SCHOOL - JEWELRY

Artist Portrait and Artwork

Copper Soldering Technique

Build-It-blocks Creative Robotics

Crumble PowerPoint 4.

Make a Two Note Wooden Whistle 1: Cut a piece of wood 20mm thick x 30mm wide to a length of 100mm. Use a back saw and a miter box to make the cut. 2: Use.

Making a simple steady hand game

Starter 11/30/17 What is your grade in this class?

Starter 12/06/17 Have you finished your soldered ring?

Starter 11/28/17 Do you like your jewelry to be simple or elaborate?

Presentation transcript:

Jewelry 1 Project # 3

Soldering Cutting Filing Sawing Burnishing Pushing Sanding

Photo 1: Cut a narrow strip of paper, wrap around stone, and mark overlap with a pencil. You now know the exact length of bezel wire needed. Cut at mark. Photo 2: Transfer strip to bezel wire. Cut bezel wire to length. Make sure ends are square, filing them as necessary. Photo 3: Bend bezel wire into circle so ends butt against each other and there are no gaps.

Photo 4: Solder bezel material very carefully! When the solder starts to flow, remove heat immediately. Trial fit stone in bezel. Sand bottom of bezel on emery paper on flat surface until even. Check that bottom surface sits flat with no gaps. The bezel should slide easily over the stone. If the bezel is too tight, place it on a round bezel mandrel and tap around the circumference with a rawhide mallet to stretch it slightly. Check the fit often until it is perfect. Don’t rush the stretching. If the bezel is too large, remove the solder joint by cutting on both sides of the joint, then repeat measuring and soldering until it is perfect.

Photo 6: Cut backing plate to accommodate bezel. Clean backing plate with sandpaper then center bezel on backing and put on mesh screen. Flux and add solder. Light torch, solder bezel to backing plate. Quench, pickle, and dry. Photo 7: Use black marker or pen to trace a line around stone and bezel. Photo 8: Saw to outer line and then file smooth.

Construct ring band using material provided. Round out ring band on ring mandrel using a rawhide mallet. File the top of the ring flat. This is so you can solder on the bezel.

Place bezel upside down on charcoal block and place the flat side of the ring band down onto the bezel. Flux Place one piece of solder on either side of the ring band and solder. Remember, be very careful when soldering not to melt the bezel.

1.You will construct a bezel set ring using the technique learned in this PowerPoint. 2.You will be given a clear stone with a hint of color. These stones magnify whatever is underneath it. You need to bring an object to put behind the stone, such as: words, picture, organic materials… Its up to you!! 3.This project is worth 100 points, so be creative and have fun !