appseal ® UC (Two component acrylic based highly flexible heavy duty water proofing coating) 1neha speciality chemicals pvt.ltd.
TOOLS REQUIRED WIRE BRUSH PAINT BRUSH BLOWER CHISEL AND HAMMER STIRRER 2neha speciality chemicals pvt.ltd.
STEP 1-: SURFACE PREPARATION Remove all loose and superficial layer or any pre treatment from surface. If there are any cracks, repair those cracks with appseal ® STP STEP 2-: Mixing of appseal ® UC. For Priming Coat-: Liquid, Powder and Water Ratio is 1:1.5:0.5 For Main Coat-: Liquid, Powder and Water Ratio is 1:1.5:10% of Liquid STEP 3-: PRIMING COAT After mixing required quantity of primary coating material, apply over prepared and damped surface with the use of Brush 3neha speciality chemicals pvt.ltd.
STEP 4-: After at least 6 Hrs. of Priming Coat,Apply 1 st coat over the Surface. STEP 5-: After at least 6 Hrs. of 1 st Coat Apply 2 nd coat over the Sur face. STEP 6-: If Required apply 3 rd Coat After 6 Hrs. of 2 nd coat 4neha speciality chemicals pvt.ltd.