How to Build RedBoot Image for IXDP425 ？ 林谷泉

2004/06/152 Outline Obtaining the Software Using the Certified Binaries Building Binary Images from Source Installing RedBoot

2004/06/153 Obtaining the Software

2004/06/154 Using the Certified Binaries The Quickest Way

2004/06/155 Building Binary Images from Source Prepare the Host Platform Install the Tool Chain Set UP the Tool Chain Obtain the RedBoot Source Code Setting Up, Configuring, and Building RedBoot

2004/06/156 Prepare the Host Platform Intel Pentium III 550-MHz Class host System 256M of RAM Red Hat 7.3 Linux ( Everything option installed ) Red Hat 8.0 and 9.0 distribution are not supported at this time.

2004/06/157 Install the Tool Chain Tool Chain can be obtained from ftp://ftp.ges.redhat.com/private/gnupro- xscale Extract the install script As root, install the tool chain

2004/06/158 Set UP the Tool Chain Create the symbolic links for arm-elf to their xscale-elf equivalents using these commands. To ensure that the correct tool chain is used, add it to your PATH.

2004/06/159 Obtain the RedBoot Source Code Make a working directory for the build. Obtain the certified Red Hat RedBoot source code (redboot-intel-xscale tar.Z) from the following site ： ftp://ftp.ges.redhat.com/private/gnupro- xscale Untar the RedBoot source

2004/06/1510 Setting Up, Configuring, and Building RedBoot Use these commands to set up the build

2004/06/1511 Setting Up, Configuring, and Building RedBoot (cont.) Add the NPE support eCos Package to the RedBoot build

2004/06/1512 Setting Up, Configuring, and Building RedBoot (cont.)

2004/06/1513 Setting Up, Configuring, and Building RedBoot (cont.) Configure and build the RedBoot images.

2004/06/1514 Setting Up, Configuring, and Building RedBoot (cont.) When the build is complete, the target images are in the directory.

2004/06/1515 Installing RedBoot Stand-alone Flash Programmers JTAG-based Flash Programmers –VisionICE

2004/06/1516 Future Works Purchase Flash ROM Study More about eCos and IXDP425