Trimble Link for Civil 3D 2012 Survey Devices Tentative Agenda 07 July 2011 DRAFT

Trimble Link for Civil 3D 2012 Survey Devices Overview –Transfer data between an Autodesk AutoCAD Civil 3D 2012 drawing and a Trimble device. Supported Devices: –Trimble Access (Civil 3D 2009 & higher) –Trimble Survey Controller (v7.00 & higher) –Survey Data card for Trimble Access & Trimble Survey Controller –5600 GDM, 3600 GDM, Nikon Instrument (export only limited to points) –Import Job Data Trimble Access Trimble Survey Controller (v7.00 & higher) Survey Data card for Trimble Access & Trimble Survey Controller –Export to a Trimble Device or Survey Data Card Points Roads Surfaces Feature Code Library Geoid Models Combined Datum Grids DRAFT

Trimble Link for Civil 3D 2012 Survey Devices Installation –Download Trimble Link for Civil 3D 2012 from the following location Note: Do not install the Trimble Link Engine (separate download) –Administrative Rights –After installation Trimble Link Menu is available and Trimble Link Ribbon. See Help File if Trimble Link Ribbon is not available. DRAFT

Trimble Link for Civil 3D 2012 Survey Devices Optional Import –Style Sheet FBK Note: If job is too large, import will fail on the controller. Use ASCII File Generator to create the FBK Civil 3D settings that impact Survey Data import –Survey Database Settings Prism Eccentricity Sea Level Correction Data Transfer (Is it required for Trimble Link?) –For PCs that only have Civil 3D 2012 DRAFT

Trimble Link for Civil 3D 2012 Survey Devices Demonstration of Exporting the following to a Survey Device/Survey Data Card –Export Points –Export Alignment (Horizontal & Vertical Only) –Export Road (Horizontal, Vertical & Corridor) –Export Surface Geoid Model –Missing Model during import –Install a Geoid Model –Exporting Geoid Model Survey Pro –Export –Import DRAFT