EDMS – R.Leuxe 1/16 CAD Catalogs CATIA / Smarteam R20 Spring News

EDMS – R.Leuxe 2/16 1.New Web TRACEPARTS 2.New materials added last year CAD Catalogs CATIA / Smarteam 3.Example of templates family: COMVAT Bellows

EDMS – R.Leuxe 3/16 CADENAS removed Use only special TRACEPARTS Website CAD Catalogs CATIA / Smarteam Insert directly from Internet into CATIA R20. 1.New Web TRACEPARTS FAQ available in CAD webpages: clic hereclic here (tutorial video)

EDMS – R.Leuxe 4/16 None installation Only 1 software for 3D models you need CAD Catalogs CATIA / Smarteam Easier to update for us and support WHY THESE CHANGES?

EDMS – R.Leuxe 5/16 CAD Catalogs CATIA / Smarteam EASY TO LAUNCH: Choose the correct windows folder when Insert: G:\Services\traceparts

EDMS – R.Leuxe 6/16 New materials need to be added to be available in CATIA Added few days after your request CAD Catalogs CATIA / Smarteam Send mail to 2.New materials added last year Goal: standardize materials in CERN designs

EDMS – R.Leuxe 7/16 24 new materials added in 2011: 5 composits, 5 other metals, 6 polymers Examples: RYTON ® R BL, NYLON 11 ® (PA 11), Plexiglas ® (PMMA), St. Steel 316LN Vacuum (LO- GE 1001), Titanium Ti-6Al-4V ELI, Zirconia ZrO2 CAD Catalogs CATIA / Smarteam ALWAYS CHECK MECHANICAL PROPERTIES FOR YOUR DESIGN (you can contact EN-MME-MM)

EDMS – R.Leuxe 8/16 TEST before creating other families CAD Catalogs CATIA / Smarteam 3.Example of Templates Family: COMVAT Bellows Help you in 3D modelling Make you faster to design Standardize 3D models in CERN designs

EDMS – R.Leuxe 9/16 Where is it? CAD Catalogs CATIA / Smarteam

EDMS – R.Leuxe 10/16 Where is it? CAD Catalogs CATIA / Smarteam

EDMS – R.Leuxe 11/16 1 ITEM, 3 models, 2 PDF (french and english) CAD Catalogs CATIA / Smarteam 1 model with all 3D details:

EDMS – R.Leuxe 12/16 CAD Catalogs CATIA / Smarteam 1 model semi-simplified: 1 model simplified:

EDMS – R.Leuxe 13/16 All these 3D models have CATIA parameters CAD Catalogs CATIA / Smarteam Same parameters as in the PDF of provider + 1 parameter to define how many convolutions you want to see in semi-simplified model

EDMS – R.Leuxe 14/16 HOW TO USE THEM? CAD Catalogs CATIA / Smarteam Choose the 3D level of detail you need Change parameters in CATIA to adjust to your need Open the document in CATIA « Smarteam Save As » the document To change the level of detail: USE PUBLICATIONS TO CONSTRAINT IN YOUR CATPRODUCT

EDMS – R.Leuxe 15/16 Next steps: CAD Catalogs CATIA / Smarteam You test it, and give your feedback We create other bellows templates from main manufacturers We create also “end pieces”

EDMS – R.Leuxe 16/16 Thank you for your attention Please continue contributing Thank you to all the users who helped us & to the CAD Support