Use original rear consol support/seat belt mountUse supplied console support bracket (front.) Unit Can possibly pop pocket off lower door. IF NOT, cut behind divider Unit can be used on both suicide door and non-door models

6 5 May have to cut 1/8” – ¼ “ off handle mount stub

96-01 DODGE RAM EXT. CAB Remove 5 anchor bolts from seat base. Remove seat belt bolt from rear console support (Torx head.) Remove 2 bolts from under console that secure upper part of console support. Remove seat base from seat (6 bolts.) Remove console bracket/seat belt anchor from rear of seat base. (You will bere-using it, see pic #1.) Attach both front and rear console supports to console and align bottom holes with (floor) seat anchor holes. Also, re-attach seat belt anchor (see pic #2.) Place unit in vehicle and bolt to floor with original bolts

PACKING LIST 1 – front console support 2/3 – 13 x 1” bolts, flat washers and lock washers ¼ - 20 x 1” bolts, washers and nylock nuts 1 – short recline handle