iIlmod Trioplex Self-expanding installation seal
Functions Steam tight Water and air tight 66mm illmod Trioplex seal thermal conductivity U-0,7 W/m²K
Installation To applicant Illmod Trioplex is easy! Under the following illustruations we will show you!
Installation 1 Clean the frame.
Installation 2 Open the rolle and cut of the first 3cm. Save the green tape for seal the rolle.
Installation 3 Remove the paper from adhesive and start to applycate. Be sure that the white side is to the inside.
Installation 4
Installation 5 In the corner you must cut the band off. Otherwise it will not expand.
Corners 1
Corners 2
Jointing
Installation
Eventual result
Thanks for your attention! Tremco-illbruck