BEZEL SETTING

THE DIME AND PENNY

MAKE A BEZEL CUP

MEASURE SOME BEZEL WIRE AROUND A COIN

MARK AND CUT

FILE THE CUT ENDS, AND THEN, FIT TOGETHER

SET SOLDER, FLUX, THEN SOLDER

ROUND ON A MANDREL, CHECK FOR FIT.

MARK & CUT BACK-PLATE, SET SOLDER

FLUX, THEN SOLDER

CUT EXCESS METAL OFF, THEN FILE SMOOTH.

MAKE A ½ ROUND BAND,………… FILE OR SAND A FLAT SPOT

SET BEZEL CUP & BAND IN A THIRD HAND

HEAT FROM THE INTERIOR UNTIL SOLDER MELTS

CLEAN, SAND, & LIGHT BUFF. ADD PAPER TO CUSHION AND RAISE

USE BURNISHER OR BEZEL PUSHER TO BEND BEZEL OVER THE TOP OF THE COIN OR STONE.

THE FINISHED WORK

THE BEZEL COIN

END