1. 2: Operating Systems Networking for Home & Small Business

2. Purpose of the OS Allows components to work together Write a report & print –Enter on keyboard –Stored in RAM –Processed by CPU –Displayed on monitor –Printed on printer All computerized device require an OS

3. How the OS Works Loads OS into RAM from disk drive Shell –Interface with the applications & user –Provides access to the OS Interact with the shell using –Command Line Interface (CLI) –Graphical User Interface (GUI) Kernel –OS code that interacts with the computer hardware is known as the –Manages communication between hardware & software

4. The OS

5. CLI

6. GUI

7. The OS Manage one user at a time Multitask –OS keeps track of resources used Some resources are not directly connected to the PC –Examples???

8. Redirector & NOS Redirector (OS driver or Network Client software) Now becomes a NOS –Allows device to be shared –Acts as though it were directly connected

9. Review so far… Which interface has a command prompt? –CLI After powering up, the OS gets loaded into where? –RAM What interfaces with the user & application? –Shell

10. OS License Commercial License Windows, Mac, UNIX GNU Public License (GPL) –FREE Linux

11. Comparing Licenses Commercial License GPL Access Restricts/limits access to code Access to code & can enhance it Cost Expensive $$$ Windows, Mac, Unix; license each PC Free Development Cycle Structured; changes aren’t avail quickly Ongoing, changes distributed quickly Support Avail for a fee usually Mostly community support

12. OS Requirements Amount of RAM Hard disk space required Processor type and speed Video resolution Minimum –Poor performance Recommended

13. Activity- Commercial or GPL

14. Choosing An OS Must meet requirements of user –Support applications –Security sufficient Is the hardware supported by the OS? Will the company support the new OS? At home, will support be available readily? Total Cost of Ownership (TCO) –Buying, installing, supporting

15. Review 1.Which type of OS provides full access to the source code? –GPL 2.Which type of OS is costly? –Commercial 3.Which type of OS provides support through its users? –GPL

16. Review 1.Name 4 specifications for OS install requirements. –HD –Processor –RAM –Video Resolution 2.Describe a network redirector. 3.What are the 2 ways you can interact with the shell? –CLI & GUI

17. Lab 2.2 Specifications of OS

18. Installing the OS- Clean Install Deletes all data on install path Applications need to be reinstalled When would you do a clean install?

19. Installing the OS- Upgrade System config settings, applications and data are preserved Replaces old OS files with new ones

20. Installing the OS- Multi-boot Can install more than one OS to a drive Why? Each has its own partition –Own files & config settings On start, user chooses which OS Only one OS runs at a time

21. Activity

22. Pre-Installation Checklist 1.Verify all hardware is certified to work with the OS. 2.Verify the hardware resources meet or exceed the minimum requirements. 3.Confirm the appropriate installation medium is available. Do you have CD or DVD & the correct drive? 4.If the OS is to be installed on a system that already contains data: (a) Use system diagnostic tools and utilities to ensure the current OS installation is in good condition, free of malicious or damaging files and codes; (b) Complete a full backup of all important files. 5.If performing a clean-install, verify that all application software is available for installation.

23. Partitions On clean install, some techs… –Partition 1 for OS –Partition 2 for data When upgrade OS, data will not be deleted

24. Review so far… 1.What is a partition? 2.What happens to data on a HD during a clean install? 3.How many OS’s are running in a multiboot system? 4.What happens to applications during an upgrade?

25. Configure for Network What is a network? –Group of devices connected to each other to share info & resources NIC IP Address –Id’s computer UNIQUE Subnet Mask –Id’s the network it is on Default Gateway –the way out of the network

26. Network Communication

27. Configuring the IP Manual (static) or Dynamic (automatic) pool

28. Computer Naming Manually assigned For easy sharing Admin designs naming scheme PRT-CL-Eng-01 represents the 1st color laser printer in the Engineering Department

29. Planning Names & Addresses The larger the network gets, you MUST be organized & documented! Come up with guidelines

30. Review 1.A DHCP server assigns address how? –Automatically/Dynamically 2.What are 3 settings you need to connect to a network? –IP, Subnet Mask, Default Gateway 3.What is a default gateway? –Address to get out of the network so it can communicate with other networks 4.Describe a partition.

31. Review 1.Which install method requires applications to be reinstalled? –Clean Install 2.Before upgrading the OS, what should you do with your data? –Back it up 3.To be on a network, what 2 things need to be unique? –IP address & computer name

32. When to Apply Patches What’s a patch? –Piece of program code that can correct a problem or enhance the functionality of an application program or OS Update computers often BUT make sure you understand the patch first!

33. Applying the OS Patch Automatic installation Prompt for Permission Manual

34. Auto, Manual, or Prompt?

35. Applying the Application Patch Browsers, Office, other programs Repair a detected vulnerability or other problem Found on manufacturer’s site

36. Lab 2.3.3

37. Review 1.What’s a patch? 2.Where can you find a patch? Manufacturer’s web site 3.What are the 3 methods for getting OS updates? Auto, Manual, With Permission 4.What user interface has icons? GUI

38. Review 1.Where do devices get IP addresses from dynamically? –A server 2.What is needed to install two OS’s on a PC? –Multiple partitions 3.What letter grade will you get on this test? –A or B, hopefully

39. 2: Operating Systems Networking for Home & Small Business