1. 3D-MC 2 Basic Functions

2. This Webinar is LISTEN only QUESTIONS? Questions will be answered in writing at the end of the Webinar.

3. AGENDA –New Menu Functions and Features  New Look  Data File Structure  New Menu Items  Removed Menu Items  Disabled Tech Items  Supervisor Mode  New OAF Structure  Steering Bug

4. Reference Material TU will be creating lessons for the new software  Quick Guide 7010-0921  9.0 code simulator (Available on secure site) OAFs will be required to run the simulator

5. 9.0 Code New 9.0 operating code 3D-MC 2 Dozer only  Will not support any other configurations New 9.1 scheduled for later this year  Supports all configurations and machines  All MC-R3s will have updated 5200 boards

6. New Look –Menu Items are the same –New Icons

7. New Data File Structure –Projects (same file structure used in Office 3D)

8. New Data File Structure Projects (TP3) –Control Points –Surface Files –Linework and Points Files

9. New Data File Structure Control –Only one control file in your Project

10. New Data File Structure Layers –Layers may contain both Points and Linework

11. New Data File Structure Surfaces –Contain all the 3D Surface Files (TN3/RD3 and PT3) –Select Yes to make available

12. New Data File Structure Importing Surfaces –Imported surface is added to the Project File

13. New Data File Structure New Surface types –Crown/Triangulated Surface

14. New Data File Structure Active –Selects active Grading surface

15. New Menu Items Control Tab –Selections available for 3D-MC 2

16. New Menu Items Slope Sensor Selection (Machine Builder)

17. New Menu Items Tools Tab (Position Check/Position Check Save) –Shortcut by touching screen

18. New Menu Items

19. 3D View

20. Show Surface Name Section View (Show Surface Name)

21. Reverse Image Profile View (Reverse Image)

22. Cut/Fill Tape options Cut/Fill Tape options (Elevation Only)

23. Cut/Fill Elevation information

24. Cut/Fill Tape options Cut/Fill Tape options (Slope Only)

25. Cut/Fill Tape options Cut/Fill Tape options (Elevation and Slope)

26. Direction of Travel Display Options Direction of Travel

27. Direction of Travel Direction of Travel Options –Always up-screen (current 9168 view) –Always down-screen (Trencher) –Up-screen +/- 45 o (Excavator swing) –Up-screen +/- 90 o (Excavator swing) –Fixed orientation (select job orientation)

28. Removed Menu Items Removed Items –Sub Grade –Reference Surface

29. Disabled Tech Items Disabled Tech Items (Advanced Settings)

30. Supervisor Mode Tools Tab

31. Supervisor Mode Lock Menus

32. Supervisor Mode Lock Buttons –Cancel and OK buttons can’t be locked

33. Supervisor Mode Lock Screen Items

34. New OAF Structure

35. Known Steering Bug Steering (Cross section) –9.0 code displays correct for up station direction –Operates same as Pocket 3D –Will change in 9.1 UP Station Down Station

36. Known Steering Bug Steering (Light Bar display) –In both examples Dozer needs to turn Left Up Station Down Station

37. 9.0 Code Conclusion –New Look –New File Structure taken form Office 3D –Two Removed features –Disabled Tech Items –Many New Features –New OAF Structure

38. Questions? Everyone who registered for this TU-Live session will receive an email with a direct link to download a copy of the this presentation. –Presentation; video, PP, Q & A Additional requests for TU staff: Email: training@topcon.com