1. Jim Bachhuber PH Earth Tech Module 5h: City Wide Application of WinSLAMM

2. City-Wide WinSLAMM Application Purpose:  Establish “Base” or “No Controls” Urban Pollution Loads  Analyze the Effect of Existing BMPs on the “Base” Load  Identify High Priority Areas to Focus Management  Determine Cost Effective Best Management Practices

3. City-Wide WinSLAMM Application Example: Racine, WI Challenge:  Population: 81,800  City Area: 16 square miles  Outfalls: 97  Subbasins: 245

4. City-Wide WinSLAMM Application Example: Racine, WI Choice #1:  Create a “*.dat” file for each of the 245 subbasins Example of one subbasin:

5. City-Wide WinSLAMM Application Or… swales curb & gutter sweep 1/wk sweep 2/yr sandy clayey Land Use

6. City-Wide WinSLAMM Application Choice #2: Create Unit Area Loading Database with 4 variables: 1.Land use (26 combinations of LU & roof connections) 2.Soils (2) 3.Drainage Type (2) 4.Management Practices (15 combinations) 1,560 Potential Combinations

7. Conducting Pollution Loading Analysis on Entire City – Racine, WI 750 Unit area loading database

8. Racine GIS Example Land Use Coverage

9. Racine GIS Example Soils Coverage (Hydrologic Groups)

10. Racine GIS Example Land Use Soils Polygons of Combined Conditions Drainage BMPs

11. Racine GIS Example Drainage Areas & Subbasins

12. Racine GIS Example Subbasins Pollutant Loading / Subbasin Polygons of Combined Conditions

13. TSS = TS (SLU file: ABC01) * (ABC01 Area within Subbasin LP3A) /100/43560

14. Racine GIS Example: Results Solids Load by Subbasin Rank Subbasins ID Priority Subbasins

15. Racine GIS Example Identify “Critical” Subbasins

16. Racine GIS Example ID Alternative BMPs