1. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. MALVINO & BATES SEVENTH EDITION Electronic PRINCIPLES

2. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Bipolar Junction Transistors Chapter 6 6

3. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Topics Covered in Chapter 6 Unbiased transistor Biased transistor Transistor currents The CE connection The base curve

4. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Topics Covered in Chapter 6 (Continued) Collector curves Transistor approximations Reading data sheets Surface mount transistors Troubleshooting

5. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Unbiased transistor Three doped regions: emitter, base, and collector Two pn junctions: emitter-base and base- collector NPN or PNP Silicon or germanium

6. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. COLLECTOR (medium doping) BASE (light doping) EMITTER (heavy doping) N P N The bipolar junction transistor has 3 doped regions.

7. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Biased transistor Forward bias the emitter diode Reverse bias the collector diode

8. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. N P N V CE V CC RCRC RBRB V BB V BE In a properly biased NPN transistor, the emitter electrons diffuse into the base and then go on to the collector.

9. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Transistor currents The ratio of collector current to base current is current gain (β dc or h FE ) Current gain is typically 100 to 300

10. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Conventional flowElectron flow ICIC IBIB IEIE ICIC IBIB IEIE I E = I C + I B I C  I E I B << I C  dc = ICIC IEIE  dc = ICIC IBIB

11. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. The CE connection The emitter is grounded or common The base-emitter acts like a diode The base-collector acts like a current source that is equal to β dc times the base current

12. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. V CE V CC RCRC RBRB V BB V BE The common emitter connection has two loops: the base loop and the collector loop. base loop collector loop

13. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Subscript notation When the subscripts are the same, the voltage represents a source (V CC ). When the subscripts are different, the voltage is between two points (V CE ). Single subscripts are used for node voltages with ground serving as the reference (V C ).

14. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Base curve Graph similar to that of a diode Diode approximations are used for analysis (typically - ideal or second)

15. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. V CE V CC RCRC RBRB V BB V BE The base circuit is usually analyzed with the same approximation used for diodes. I B = V BB - V BE RBRB

16. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. 0 24 6 8 1012 14 16 18 2 4 6 8 10 12 14 V CE in Volts I C in mA A graph of I C versus V CE 20  A 0  A 100  A 80  A 60  A 40  A (Note that each new value of I B presents a new curve.) This set of curves is also called a family of curves.

17. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Regions of operation Active - - - used for linear amplification Cutoff - - - used in switching applications Saturation - - - used in switching applications Breakdown - - - can destroy the transistor and should be avoided

18. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Transistor circuit approximations First: treat the base-emitter diode as ideal and use  I B to determine I C. Use for troubleshooting. Second: correct for V BE and use  I B to determine I C. Third (and higher): correct for bulk resistance and other effects. Usually accomplished by computer simulation. Use for design work.

19. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.  dc I B V CE V BE = 0.7 V The second approximation:

20. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. V CC RCRC RBRB V BB V BE = 0.7 V I B = V BB - V BE RBRB I B = 5 V - 0.7 V 100 k  5 V 100 k  = 43  A

21. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. V CC RCRC RBRB V BB 5 V 100 k  I B = 43  A  dc = 100 I C =  dc I B I C = 100 x 43  A = 4.3 mA

22. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. V CC RCRC RBRB V BB 5 V 100 k  I B = 43  A I C = 4.3 mA 1 k  12 V V R C = I C x R C V R C = 4.3 mA x 1 k  = 4.3 V

23. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. V CC RCRC RBRB V BB 5 V 100 k  I B = 43  A I C = 4.3 mA 1 k  12 V V CE = V CC - V R C V CE V CE = 12 V - 4.3 V = 7.7 V

24. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Reading transistor data sheets Maximum ratings on voltage, current, and power Power transistors dissipate more than 1 watt Temperature can change the value of a transistor’s characteristics

25. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Typical Breakdown Ratings V CBO = 60 V V CEO = 40 V V EBO = 6 V Note: these are reverse breakdown ratings with one transistor leg open (e.g. V CBO is voltage collector to base with emitter open)

26. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. 0 2 4 6 8 10 12 14 V CE in Volts I C in mA 50 A graphic view of collector breakdown

27. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Typical Maximum Ratings I C = 200 mA dc P D = 250 mW (for T A = 60 o C) P D = 350 mW (for T A = 25 o C) P D = 1 W (for T C = 60 o C)

28. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Data sheet h FE “On Characteristics” I C in mAh FE(min) h FE(max) 0.1 40___ 1 70___ 10100300 50 60___ 100 30___

29. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Surface-mount transistors A variety of package styles (three- terminal gull-wing is typical) Some SMTs can dissipate 1 watt or more Some SMTs house multiple transistors

30. Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Troubleshooting Look for gross voltage errors. First approximation and mental estimates will usually suffice. Resistors generally don’t short but circuit boards can. Circuit boards can and do open. Junctions can and do short. Junctions can and do open.