1. Surface John Downey

2. Data Collection  Data is collected with an FmX  RTK is required  Survey/Design is unlocked on all FmX’s  Field Level II is required to install tile AGRICULTURAL INFORMATION MANAGEMENT

3. FmX Operation  Activate the Survey/Design Plug-in AGRICULTURAL INFORMATION MANAGEMENT

4. FmX Operation  Setup the Survey/Design Plug-in AGRICULTURAL INFORMATION MANAGEMENT

5. FmX Operation  Stopped at the field, Set your Master Benchmark AGRICULTURAL INFORMATION MANAGEMENT

6. FmX Operation  Start recording AGRICULTURAL INFORMATION MANAGEMENT

7. Surface  Requires (Farm Works) –Trac –Site –Pro AGRICULTURAL INFORMATION MANAGEMENT

8. Surface  Upon importing the Field Level data, select the Topographic layer AGRICULTURAL INFORMATION MANAGEMENT

9. Surface  Displaying the information AGRICULTURAL INFORMATION MANAGEMENT

10. Surface  Selecting Different Views

11. Surface  Display Options –Tributary Lines –Flow Arrows –Contour Lines AGRICULTURAL INFORMATION MANAGEMENT

12. Tributary Lines AGRICULTURAL INFORMATION MANAGEMENT

13. Flow Arrows AGRICULTURAL INFORMATION MANAGEMENT

14. Contour Lines AGRICULTURAL INFORMATION MANAGEMENT

15. 3D View AGRICULTURAL INFORMATION MANAGEMENT

16. Tile Design: Lines AGRICULTURAL INFORMATION MANAGEMENT

17. Tile Design: Offset AGRICULTURAL INFORMATION MANAGEMENT

18. Tile Design: Offset AGRICULTURAL INFORMATION MANAGEMENT

19. Surface Profile AGRICULTURAL INFORMATION MANAGEMENT

20. Conclusion  Surface is an analysis and design tool that assists with the optimal placement of tile and surface drains  Combine 3D views and water flow analysis tools to decide where surface ditches or subsurface tile lines should be installed to optimally drain the field, and ultimately increase crop yields AGRICULTURAL INFORMATION MANAGEMENT

21. Conclusion  Drainage lines drawn on the screen then produce a vertical profile of the existing surface along any line  Exporting these designs back to the FmX integrated display lets you use the Autoslope feature of the FieldLevel II system to design the vertical component of your surface or sub-surface designs by defining slope and depth constraints. AGRICULTURAL INFORMATION MANAGEMENT