Download presentation
Presentation is loading. Please wait.
Published byAllen Parks Modified over 9 years ago
1
Malfunctions They drive everything! Written and presented by: Jacqui Chapman
2
Introduction The Question One Solution Emulating Malfunctions Data Conclusion 29 th April 2009WATS 20092
3
Introduction The number and complexity of malfunctions are the cornerstone to the depth of simulation required. 29 th April 20093WATS 2009
4
The Question Why is it different from operator training? What is the function of maintainer training? 29 th April 2009WATS 20094
5
Operator vs. Maintainer Training Cause and Effect Where the emphasis is on the effects of a malfunction and it is how an operator reacts to it that is all important Where the cause of the malfunction is what a maintainer is trying to discover, using the effect as part of a fault diagnosis procedure. 29 th April 2009WATS 20095
6
Training Form, Fit, Feel, Fidelity and Function FForm – shape of.. FFit – well suited FFeel – ascertain by touch FFidelity – precision in reproduction FFunction – mode of activity by which a thing fulfils its purpose MMalfunction requirements will help drive the final solution 29 th April 2009WATS 20096
7
Maintenance Tasks Scheduled Maintenance Malfunction Diagnosis Malfunction Rectification 29 th April 2009WATS 20097
8
Level of Maintenance 1)Confirm that there is a malfunction and isolate 2)Interpretation of monitoring data 3)Identify the component that has malfunctioned 29 th April 2009WATS 20098
9
Malfunction Simulation 1)Confirmation of Failure 29 th April 2009WATS 20099
10
Malfunction Simulation 2)Interpretation of Health and Usage Monitoring System 29 th April 2009WATS 200910
11
Malfunction Simulation 3)Use of test equipment, failure flow charts 29 th April 2009WATS 200911
12
Procedural vs. ‘Free Play’ Fault Propagation –Does the simulation need to display secondary effects? Diagnosis and Rectification –Does the simulation need to react to deviation? No – procedural Yes – Free play 29 th April 2009WATS 200912
13
29 th April 2009WATS 200913
14
Confirmation of Failure 29 th April 2009WATS 200914 IF Engine > x rpm AND Power > 24V dc THEN Pressure Indicators = 3000 psi No Trigger to CWS Flying Controls, Landing Gear & Brakes respond correctly IFEND IF Engine > x rpm AND Power > 24V dc AND no fault applied THEN Pressure Indicators = 3000 psi No Trigger to CWS Flying Controls, Landing Gear & Brakes respond correctly IFEND ELSE IF fault applied THEN Pressure Indicators = 0 psi Trigger the CWS Flying Controls, Landing Gear & Brakes do not respond END IF
15
Interpretation of HUMS If HUMS connected and switched on then HUMS unit = ON Procedural If no fault applied then If HUMS O/P = then System response HUMS display Else if fault a then If HUMS O/P = then System response HUMS display … Freeplay Switching off systems Disconnecting connectors Incorrect selection of HUMS unit Failures in other system impacting original system 29 th April 2009WATS 200915
16
Use of Test Equipment 29 th April 2009WATS 200916 If STTE connected and switched on then STTE unit = ON Procedural If no fault applied then If STTE O/P = then System response STTE display Else if fault a then If STTE O/P = then System response STTE display … Freeplay Switching off systems Disconnecting connectors Incorrect selection of HUMS unit Failures in other system impacting original system
17
One Solution Object Orientated Design –All components emulated Get propagation automatically 29 th April 2009WATS 200917
18
29 th April 2009WATS 200918
19
Simulate vs. Emulate Simulate is to have the appearance, form, feel and function of… Emulate is to attempt to equal functionality without necessarily providing form and feel. 29 th April 2009WATS 200919
20
29 th April 2009WATS 200920
21
Data Emulation/Simulation is only as good as the data that goes to build it –Develop from technical data –Use real equipment software Develop a good working relationship with the data provider 29 th April 2009WATS 200921
22
Conclusion Understand the level of malfunction coverage required Understand what the maintainer is being trained to do in reaction to a malfunction Form, Fit, Feel, Fidelity and Function 29 th April 2009WATS 200922
23
Malfunctions They drive everything Jacqui.chapman@pennantplc.co.uk Jacqui.chapman@pennantplc.co.uk www.pennantplc.co.uk www.pennantplc.co.uk 29 th April 2009WATS 200923
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.