Presentation is loading. Please wait.

Presentation is loading. Please wait.

Doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 Brian Hart, Cisco SystemsSlide 1 Making the Quiet Channel Element Work for 11a/11n Clients Date: 2011-09-30.

Published byBerenice Chandler Modified over 8 years ago

Similar presentations

Presentation on theme: "Doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 Brian Hart, Cisco SystemsSlide 1 Making the Quiet Channel Element Work for 11a/11n Clients Date: 2011-09-30."— Presentation transcript:

1 doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 Brian Hart, Cisco SystemsSlide 1 Making the Quiet Channel Element Work for 11a/11n Clients Date: 2011-09-30

2 doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 Overview Situation –Quiet Element in 11n quiets legacy devices throughout the BSS bandwidth when needed –Quiet Chanel Element was added in 11ac [2] to allow quieting secondary80 channel Problem –Quiet Channel element is paired with Quiet element, which unnecessarily quiets 11a/11n devices operating in primary and primary40 channels of a 80+80 MHz or 160 MHz BSS –Quiet Channel element has a redundant field Solution –We propose to remove the need for pairing Quiet Channel element with Quiet element, in order to avoid quieting legacy devices unfairly –We propose required format changes Slide 2

3 doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 Situation TGac recently added Quiet Channel element to quiet secondary80 channel in 80+80 MHz or 160MHz BSS [2] Quiet Channel element has the following structure and needs to be paired with Quiet element –The BSS Usable Channel Width field, which is 1 octet in length, indicates the only allowed channel bandwidth in use by STAs within the BSS during the intervals indicated by the Quiet element. The field value is set to 0 for primary 80MHz. Values in the range 1 to 255 are reserved. –The AP Quiet Mode field specifies STA behavior during the quiet intervals. When communications to the AP are allowed on the channel indicated by the BSS Usable Channel Width field, the AP Quiet Mode field is set to 1. Otherwise, it is set to 0. Slide 3 Element ID Length BSS Usable Channel Width AP Quiet Mode Octets: 1111

4 doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 Problem The recently-added Quiet Channel element is paired with Quiet element –Sending Quiet Channel element along Quiet element quiets legacy devices in the use case where AP can continue operation in the primary80 –In this use case, since AP continues operation in the primary80, the legacy devices can still continue operation in primary or primary40 channels, however as the result of transmission of Quiet element, the legacy devices unnecessarily and unfairly are quieted Current frame format of Quiet Channel has a redundant field –During TGac meeting in September this issue was raised and it was agreed by the stakeholders to further improve the frame format Slide 4

5 doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 Solution We propose to a mode for the Quiet Channel element where it is sent standalone –This would only quiet the secondary80 channel of the BSS, without affecting legacy devices –11ac and 11a/11n devices continue to use primary, primary40, and primary80 channels We also propose to remove the redundant BSS Usable Channel Width field in Quiet Channel element in [2] In our proposed solution, the Quiet Channel element is used to Either –Quiet secondary80, but all frames exchanges in primary80 are allowed (AP Quiet Mode = 1) –In this case Quiet Channel element(s) with AP Quiet Mode=1 are sent as standalone element(s); there is no need to also send Quiet element(s) for legacy devices (and they remain unaffected by quieting secondary80 channel) –This case is useful when concurrent transmit and radar detection is implemented in AP Or –Quiet the secondary80 and prohibit transmissions targeted to AP in primary80 (AP Quiet Mode=0) –In this case one Quiet Channel element with AP Quiet Mode=0 is paired with Quiet element(s). –This case is useful when concurrent transmit and radar detection is not implemented in AP. Clients are allowed to communicate by DLS or TDLS in primary80 Or a Beacon/Probe Response can simultaneously include both mechanisms Slide 5

6 doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 Proposal for Quiet Channel Element Format AP Quiet Mode = 0: Quiet Channel element is sent with Quiet element(s) AP Quiet Mode = 1: Quiet Channel element(s) are sent standalone –Quiet Count: The Quiet Count field is set to the number of TBTTs until the beacon interval during which the next quiet interval for secondary80 starts. A value of 1 indicates the quiet interval starts during the beacon interval starting at the next TBTT. A value of 0 is reserved. –Quiet Period: The Quiet Period field is set to the number of beacon intervals between the start of regularly scheduled quiet intervals defined by this Quiet Channel element. A value of 0 indicates that no periodic quiet interval is defined. –Quiet Duration: The Quiet Duration field is set to the duration of the quiet interval for secondary80, expressed in TUs. –Quiet Offset: The Quiet Offset field is set to the offset of the start of the quiet interval for secondary80 from the TBTT specified by the Quiet Count field, expressed in TUs. The value of the Quiet Offset field is less than one beacon interval. Slide 6 Element ID Length AP Quiet Mode (= 1) Quiet CountQuiet PeriodQuiet DurationQuiet Offset Octets: 1111122 Element ID Length AP Quiet Mode (= 0) Octets: 111

7 doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 Summary We outlined details of the problem in the recently-added Quiet Channel element We proposed to allow Quiet Channel element to be sent standalone in order to avoid unnecessarily quieting legacy devices We provided the proposed changes to the frame format of the Quiet Channel element Slide 7

8 doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 Straw Poll Slide 8 Do you support to the changes proposed in slide 6 –Y –N –A

9 doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 LGSlide 9 Reference [1] 20101012r2 Cisco; FCC 5 GHz contiguous unlicensed spectrum [2] 11-11-1322-02-00ac-d1-comment-resolution-quiet- element

10 doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 LGSlide 10 Backup

11 doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 Slide 11 5 GHz license-exempt spectrum details [1] 2 W EIRP/ DFS&TPC Slide 11Peter Ecclesine, Cisco 5.200 5.3005.4005.5005.6005.7005.8005.9005.100 Europe USA/ Canada Japan 5.725 5.875 Indoor Part 87F/80.375 DSRC 250 mW Outdoor 1 W EIRP 4 W EIRP 5.470 5.725 Outdoor 1W EIRPIndoor 200 mW EIRP DFS & TPC required world wide China 2 W EIRP Indoor 200 mW EIRP Outdoor 1 W EIRP India Campus/Indoor 200 mW EIRP DFS & TPC

12 doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 Slide 12 Observing rules for DFS bands, AP usually quiets the whole band –E.g. by sending Quiet Element However, in the case of 160MHz operation WLAN can continue operation by switching to 80MHz operation The following shows the relevant cases Peter Ecclesine, CiscoSlide 12 1441401361321281241201161121081041001651611571531496460565248444036 IEEE channel # 20 MHz 40 MHz 80 MHz 160 MHz UNII-1 UNII-2 DFS Band UNII-2 DFS Band UNII-3 Contiguous 160 MHz BSS 1441401361321281241201161121081041001611571531496460565248444036 Primary80 Non-Contiguous 160 MHz Primary80 Quieting in DFS Bands

Download ppt "Doc.:IEEE 802.11-11/1385r0 Submission Sep. 2011 Brian Hart, Cisco SystemsSlide 1 Making the Quiet Channel Element Work for 11a/11n Clients Date: 2011-09-30."

Similar presentations

A Brief Introduction to the IEEE802.11h Draft

A Brief Introduction to the IEEE802.11h Draft
Submission doc.: IEEE 802.11-12/1357r3 Nov. 2012 Slide 1 Dynamic TIM and Page Segmentation Date: 2012-11-08 Authors: Weiping Sun, Seoul National University.

Submission doc.: IEEE /1357r3 Nov Slide 1 Dynamic TIM and Page Segmentation Date: Authors: Weiping Sun, Seoul National University.
Doc.:IEEE 802.11-10/1159r1 Submission Laurent Cariou Sept, 2010 Slide 1 Non contiguous 40+40 additional bandwidth mode Date: 2010-09-16.

Doc.:IEEE /1159r1 Submission Laurent Cariou Sept, 2010 Slide 1 Non contiguous additional bandwidth mode Date:
Doc.: IEEE 802.11-10/1303r5 Submission November 2010 Jarkko Kneckt (Nokia)Slide 1 Overlapping BSS Co-Existence Date: 2010-11-11 Authors:

Doc.: IEEE /1303r5 Submission November 2010 Jarkko Kneckt (Nokia)Slide 1 Overlapping BSS Co-Existence Date: Authors:
Submission doc.: IEEE 802.11-15/870r2 July 2015 Guido R. Hiertz et al., EricssonSlide 1 802.11ax in 2.4 GHz Date: 2015-07-14 Authors:

Submission doc.: IEEE /870r2 July 2015 Guido R. Hiertz et al., EricssonSlide ax in 2.4 GHz Date: Authors:
Masters, Slaves and Clients

Masters, Slaves and Clients
Masters, Slaves and Clients

Masters, Slaves and Clients
Doc.: IEEE 802.11-12/1054r0 Submission Sep. 2012 Santosh Pandey (Cisco)Slide 1 FILS Reduced Neighbor Report Date: 2012-09-07 Authors:

Doc.: IEEE /1054r0 Submission Sep Santosh Pandey (Cisco)Slide 1 FILS Reduced Neighbor Report Date: Authors:
Doc.:IEEE 802.11-11/1568r1 Submission Nov. 2011 Brian Hart, Cisco SystemsSlide 1 STA Antenna Indication in VHT Capabilities Date: 2011-11-09.

Doc.:IEEE /1568r1 Submission Nov Brian Hart, Cisco SystemsSlide 1 STA Antenna Indication in VHT Capabilities Date:
Submission doc.: IEEE 802.11-13/0282r0 Slide 1 802 5 GHz Tutorial Date: 2013-03-12 Authors: Peter Ecclesine (Cisco Systems) March 2013.

Submission doc.: IEEE /0282r0 Slide GHz Tutorial Date: Authors: Peter Ecclesine (Cisco Systems) March 2013.
Doc.:IEEE 802.11-12/0129r3 May 2012 Santosh Abraham, Qualcomm Inc. Short Beacon Slide 1 Authors:

Doc.:IEEE /0129r3 May 2012 Santosh Abraham, Qualcomm Inc. Short Beacon Slide 1 Authors:
Doc.: IEEE 802.11-13/1207r1 Submission September 2013 Matthew Fischer et al (Broadcom)Slide 1 CID 205 BSSID Color Bits Date: 2013-09-16 Authors:

Doc.: IEEE /1207r1 Submission September 2013 Matthew Fischer et al (Broadcom)Slide 1 CID 205 BSSID Color Bits Date: Authors:
Doc.: IEEE 802.11-13/0089r0 Submission Listen interval update Jan 2013 Slide 1 Date: 2013-01-13 Authors: Jinsoo Choi, LG Electronics.

Doc.: IEEE /0089r0 Submission Listen interval update Jan 2013 Slide 1 Date: Authors: Jinsoo Choi, LG Electronics.
Doc.: IEEE 802.11-10/0256r0 Submission March 2010 Zhou Lan NICTSlide 1 Proposal of Synchronized Quiet Period for Incumbent User Detection Date: 2010-March.

Doc.: IEEE /0256r0 Submission March 2010 Zhou Lan NICTSlide 1 Proposal of Synchronized Quiet Period for Incumbent User Detection Date: 2010-March.
Doc.: IEEE 802.11-12/0102r2 SubmissionLiwen Chu Etc.Slide 1 TGah Power Saving Date: 2012-01-16 Authors: Date: Jan, 2012.

Doc.: IEEE /0102r2 SubmissionLiwen Chu Etc.Slide 1 TGah Power Saving Date: Authors: Date: Jan, 2012.
Submission September 2015 doc.: IEEE 802.11-15/1091r0 September 2015 Considerations on Range Extension with SIG-A Repetition Date: 2015-09-14 Authors:

Submission September 2015 doc.: IEEE /1091r0 September 2015 Considerations on Range Extension with SIG-A Repetition Date: Authors:
Doc.: IEEE 802.11-10/1054-00 Submission September 2010 James Wang, MediatekSlide 1 Wide Band OBSS Friendly PSMP Date: 2010, September 13 Authors:

Doc.: IEEE / Submission September 2010 James Wang, MediatekSlide 1 Wide Band OBSS Friendly PSMP Date: 2010, September 13 Authors:
Doc.: IEEE 802.11-10/0231r3 Submission March 2010 John R. Barr, JRBarr, Ltd. & NiCTSlide 1 Efficient Methods for Coexistence with Other 60GHz Systems Date:

Doc.: IEEE /0231r3 Submission March 2010 John R. Barr, JRBarr, Ltd. & NiCTSlide 1 Efficient Methods for Coexistence with Other 60GHz Systems Date:
Doc.: IEEE 802.11-13/0071r0 January 2013 Submission Channel indication in RAW/TWT Date: 2013-01-14 Authors: Merlin, Qualcomm Slide 1.

Doc.: IEEE /0071r0 January 2013 Submission Channel indication in RAW/TWT Date: Authors: Merlin, Qualcomm Slide 1.
Doc.: IEEE 802.11-15/0240r0 Submission January 2015 Jim Lansford, CSR TechnologySlide 1 IEEE 802.11 Regulatory SC DSRC Coexistence Tiger Team Final Report.

Doc.: IEEE /0240r0 Submission January 2015 Jim Lansford, CSR TechnologySlide 1 IEEE Regulatory SC DSRC Coexistence Tiger Team Final Report.

Similar presentations

Ads by Google