1. Scratch Part 2 – Character Commands

2. What does a command do?  Commands in programming allow an object whatever it is to do something. In the case of this object it will be your character moving.

3. What does this guide show?  In this guide you will learn to make your character do the following: -  Move up  Move Down  Move Left  Move Right  Stop at the edge of the screen

4. Step 1 – Open your game

5. Step 2 – Go to the Scripts tab

6. Step 3 – Select Control

7. Step 4 – Drag “When [Space] key pressed” box into script area

8. Step 5 – Change Space to Up Arrow

9. Step 6 – Go To Motion

10. Step 7 – Add “Point in direction 90” to your script

11. Step 8 – Change the direction to “(0) Up”

12. Step 9 – Add “move 10 steps” to your script

13. Step 10 – Go back to control

14. Step 11 – Add “Stop Script” to the bottom of your script

15. Step 12 – Repeat this 3 more times  You should now create 3 new scripts for the following: -  Move Down  Move Left  Move Right  This is done in the same way you just need to change the options for the key pressed and the direction. As below: - ScriptKeyDirection Move DownDown Arrow(180) Down Move LeftLeft Arrow(-90) Left Move RightRight Arrow(90) Right

16. You have now made your character move, however if it goes to the edge of the screen it doesn’t stop this need to be fixed. If your scripts work move on to the next slide. If not you need to go back over the steps making sure you haven’t made a mistake.

17. Stopping your character at the edge of the screen.  For this you need to start in the Scripts tab with the control options open.

18. Step 1 – Add “When (Flag) Clicked”

19. Step 2 – Add “Forever” to the script

20. Step 3 – Go to the Motion options

21. Step 4 – Add “if on edge, bounce” option to the script.

22. Step 5 – Active the flag for this to work properly

23. Complete  You have now created your own character and it should be able to move around the white screen and stop at the edges.  Well Done.