1. XR5919 Steering Relief Valve Adjustment

2. Step1 Remove center cover Steering Priority Valve Test Port

3. Step 2 o Remove steering relief valve from steering priority manifold Steering Relief Valve

4. Step 3 o Remove steering relief valve from steering priority manifold o Disassemble valve o Clean all parts o Reassemble in reverse order using Loctite #262 on adjustment screw o Reinstall steering relief valve into the steering priority manifold Adjustment Screw

5. Step 4 o Install guage onto test port o Dead head steering one direction. o While holding steering to relief, adjust screw to 2200 +/- 50 PSI o Dead Head steering the opposite direction to verify pressures are equal o Install cap and washer back onto steering relief valve o Reinstall cover and return to service