1. LESSON – 3 DRAFTING METHOD OF SHIRT DRAWING LINE FRONT LINE BACK LINE -------------------- FOLD LINE

2. FRONT & BACK 0-1 =LENGTH + 3C.M 1-2=5C.M 1-3=5C.M 2-4 AND 3-5=2C.M ON PICK POINT LINE 4-6=1/4 CHEST 6-7=1/4 CHEST+5C.M 6-8=1/2 SHOULDER+1C.M 4-9=1/2 SHOULDER+1C.M JOINT LINE 9TO8

3. 4-10 AND 4-11=1/6 NECK JOINT ROUND NECK SHAPE 9-12=1/24 CHEST JOINT STATE LINE 12-10 13=MIDDLE OF 12-8 13-14=1.5 C.M JOINT12,13 AND 7 ARM HOLE SHAPE 5-17=6-7. JOINT 7-17 FRONT & BACK

4. 15-MIDDLE OF 11-5 JOINT 15-16 17-20=6C.M 18 MIDDLE OF 17-5 DRAW CURVE SHAPE AS PER REQUIRE 20-18 16-19=2C.M IN JOINT 7,19 AND 20 FRONT & BACK

5. BACK BACK ON FOLD 4 –A=AND 9-B=1/24 CHEST JOINT B-A AND B-C ARM HOLE SHAPE

6. SLEEVE 0-1=SLEEVE LENGTH-CUFF WIDTH+2C.M 0-2=1/8 CHEST 2-3=1/4 CHEST 1-4=1/2 CUFF ROUND+3C.M 4-5=1C.M DOWN JOIN3 TO 0 6=MIDDLE OF 3TO 0 7=MIDDLE OF 6TO 0 7-8=1C.M UP 9=MIDDLE OF 6-3

7. 9-10=1C.M DOWN JOINT 3,10,6.8 AND 0 DRAWING ARMHOLE SHAPE DRAWING SLEEVE PART JOIN 3-0 11=MIDDLE 5-1 11-12= 1/8 CHEST FOR SLEEVE PLACKET ON BACK SLEEVE

8. YOCK 0-1 AND 1-2=1/6 NECK 0-3, 2-4 AND 1-A=1/2 SHOULDER+1C.M 0-6=3C.M 0-5=1/6 NECK+1C.M,JOINT ROUND NECK SHAPE 5-6-7 MIDDLEOF A-3 7-8=1C.M OUT JOINT 5,7,8 AND 4

9. COLLAR 0-1=5C.M COLLAR WIDTH 1-2=3TO5 C.M STAND WIDTH 2-3 AND 0-5=1/2 NECK 5-6=2C.M 4-7=1C.M DOWN 7-8=8C.M 9=MIDDLE OF 5-0 JOINT TO9,10 JOINT 8TO9 COLLAR SHAPE

10. COLLAR - CUFF 7-11=2C.M 3-12=2.5 C.M JOINT 11,12 13=MIDDLE OF 12-10 13-14=1/2 C.M JOINT CURVE SHAPE 12,14 AND 10

11. CUFF 0-1=5C.M CUFF WIDTH 2-3=5C.M CUFF WIDTH 0-2=CUFF ROUND 1-3=CUFF ROUND 0-5,0-4,2,6 AND2,7=2C.M DRAWING ROUND SHAPE