1. Quick Start Up Tool

2. Why the StartUp Tool? Plug-and-play installation of Ingate and SIP trunking, as simple as possible. Necessary steps:  Unpack your new Ingate box and connect it to the LAN.  Run the StartUp tool  Apply configuration on the Ingate  DONE Will help to install the SIP Trunking module if not preinstalled.

3. Step 1 – Address provisioning B. Type mac address and IP address of the Ingate unit. C. Select a password. No password are set default. E. When done the SIP Trunking tool can be launched. D. Press Next and the tool will automatically provide an IP address to the Ingate. A. Connect you Ingate according to the picture Status information

4. Step 2 – Trunking configuration C. Select SIParator type (only available for SIParators). G. Configure netmask for the internal network F. Configure external interface using DHCP or static IP A. Select ITSP from drop down menu and provide necessary account information B. Select IP PBX type and IP address on your internal network. D. DNS servers to use. Optional E. Optional to add and remove pre- fixes. H. When done the tool will generate a configuration based on you input an you will automatically be redirected to the Ingate and only need to apply the configuration and your done!

5. More options Trunking Provider selection. Use Generic if you can’t find your provider Available options for number manipulation. IP PBX selection. Use Generic if you can’t find your IP PBX