1. Dockage Standard User Test User 7/24/08

2. Dockage For New Test Must have Standard User Access for Dockage to initiate new Dockage checktest. Select FGIS-928 Dockage Check Test from Dropdown next to Create New To finish an Open test use Search or enter the Test Reference No. Test Users use Search by TRN or Search for Existing Checktest to locate record started by Standard User.

3. Blank General Page Steps to Complete: 1. Enter Service Point or use Lookup 2. Click on Add Equipment 3. Use Equipment search to find equipment and then Select Equipment 4. Add both Standard and Test Equipment 5. Click on Save 6. Review 7. Click on Next

4. Completed General Page Service point is location of Test Equipment. When Standard results are submitted an email will be sent to the email address associated with this service point number. Standard User adds the Standard equipment and a Test Equipment. The Test equipment can be edited by the Test user.

5. Blank Standard Page 1. Enter Type of Sample 2. Enter RPM value 3. Enter Date Mailed 4. Enter Actual Test values. Total Dockage is calculated when page is saved. 5. Identify Sample No. as appears on Sample can. i.e. Set Number AA -1 6. Enter Results By and Date 7. Click on Save 8. Review 9. Click on Submit or Submit/Create New

6. Completed Standard Page Results must be submitted to generate email and allow user to enter test equipment results.

7. Start Here If known enter Test Reference No and click on Open Or Use Search for Existing Checktest

8. Edit General Page as Needed Service point and Test equipment can be edited if necessary Save any changes the click on Next or Test

9. Blank Test Page 1. Enter equipment setting. Can use sieve id numbers or just type of sieve. 2. Enter RPM Total dockage is calculated by program. 3. Enter Actual Test values. 4. Enter Results By and Date 5. Click on Save 6. Review 7. Click on Submit

10. Completed Test Page Clicking on Submit locks the record and moves the user to the Summary Screen.

11. Summary Screen Click on Cancel to go back to Home page or use breadcrumb menu at the top

12. Remarks Enter any additional information in remarks and hit Save. All remarks are saved the same way. It shows who and when each remarks entry is made. Remarks never locked.

13. Corn Only Dockage General Page

14. Corn Only Dockage Completed Test Page Click on Submit to lock record and see results

15. Corn Dockage Summary Page

16. Error Messages

17. Service Point Lookup Use when you don’t have all the service points codes memorized or a handy list. Select either a Field Office or Official Agency to limit Search Click on Search If Location found Click on select to the far left of correct row. If location not found Click on Redo Search and try new parameters.

18. Equipment Search To add Equipment use this screen to filter equipment list to locate equipment. Use only those fields needed to limit list. Not all of the fields need to be used. If used from an open checktest record the Equipment type is limited to equipment tested on that form. Lab scales only on the 904 Lab scale checktest and Dockage, Rice Miller, and Rice Sheller and the Rice Equipment form. Serial number works on partial serial numbers as well. If equipment not found in system Use Create New Equipment link to add a new piece of Equipment.

19. Search Returns an Equipment Listing Equipment Lists can be sorted by clicking to Column Header Equipment list can be copied and pasted into other documents like Excel or Word. Equipment lists can be printed from the browser.