1. © 2011 Autodesk Consumer Product Design and Simulation James Herzing Technical Consultant– Autodesk, Inc. Mike Smell Technical Consultant – Autodesk, Inc. Jay Tedeschi Technical Specialist – Autodesk, Inc.

2. © 2011 Autodesk Class Summary This class will teach you about the process for designing consumer products using the Autodesk® Product Design Suite and how to ensure their quality with Autodesk Simulation. Starting with surface modeling and creating a solid model, we will analyze the part to determine if the fiber fill will create a strong plastic part. This information will be taken into Autodesk Simulation Mechanical (formerly Algor®) to verify its strength. Finally, we will create the images that would be used for advertising the part. This class will cover everything you need to design and analyze a model, and optimize it for material and cost.

3. © 2011 Autodesk Learning Objectives At the end of this class, you will be able to:  Create and enhance models with Autodesk Alias ® and Inventor ®  Optimize the molding process with Autodesk Moldflow ®  Validate your model with Autodesk Simulation

4. © 2011 Autodesk Plastic Part Design with Autodesk Digital Prototyping

5. © 2011 Autodesk Plastic Part Modeling with Alias and Inventor

6. © 2011 Autodesk CP Design Workflow with Alias Design Ideation Refinement Visualization & Communication Concept Development

7. © 2011 Autodesk Engineering Design with Inventor  Direct integration with Moldflow and Algor  Plastic part design features  Inventor Tooling for mold design

8. © 2011 Autodesk Optimizing the Molding Process

9. © 2011 Autodesk Optimizing the Molding Process  Identify and eliminate defects  Optimize gate locations and fill time  Control shrinkage and warpage  Create anisotropic material data

10. © 2011 Autodesk Optimizing the Molding Process Design objectives:  Find optimum gate location  Determine fill time and pressures  Observe fiber orientation  Review residual stresses

11. © 2011 Autodesk Validating Plastic Parts with Simulation

12. © 2011 Autodesk Validating Plastic Parts with Simulation  Interoperability  Comprehensive analysis capabilities  Moldflow materials

13. © 2011 Autodesk Validating Plastic Parts with Simulation Design requirements:  Include fiber orientation and residual stress effects  Body must survive 100 in/lb torque  Natural frequencies must not occur at 500 and 1000 Hz  Survive a drop test from 4 feet

14. © 2011 Autodesk Autodesk University Session Feedback Your feedback is very important to Autodesk. You can complete the session survey on your mobile device, PC, or at a survey station. Each completed session survey enters you in that day’s drawing for a free AU 2012 pass. You can help make AU 2012 better! Complete the AU Conference Survey at a survey station and receive an AU 2011 T-Shirt.

15. © 2011 Autodesk Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2011 Autodesk, Inc. All rights reserved.