Presentation is loading. Please wait.

Presentation is loading. Please wait.

Design Option #1 Angled plates. Design Option #2 Horizontal target outboard of the pump entrance. Steep ramp on the “shelf”. More clearance.

Published byJustin Page Modified over 9 years ago

Similar presentations

Presentation on theme: "Design Option #1 Angled plates. Design Option #2 Horizontal target outboard of the pump entrance. Steep ramp on the “shelf”. More clearance."— Presentation transcript:

1 Design Option #1 Angled plates

2

3

4

5

6

7

8 Design Option #2 Horizontal target outboard of the pump entrance. Steep ramp on the “shelf”. More clearance to a variety of plasma shapes.

9

10

11 10 degree tilt on gas seal, 1/8” thick 316 SS, 0.3” from tube weld 2.6” long, 45 degree angle Neutral Blocker 1/8” thick 316 SS Black Represents 1” thick Graphite Grey is an underlying 316 SS mechanical structure, ½” thick Inner Tile Flush With Vessel Nozzle Magenta is outline of the new CS PFCs

12

13

14

15

16

Download ppt "Design Option #1 Angled plates. Design Option #2 Horizontal target outboard of the pump entrance. Steep ramp on the “shelf”. More clearance."

Similar presentations

Euratom 1 AIA robot – 2007.10 DEVELOPMENT OF AN ITER RELEVANT INSPECTION ROBOT Euratom.

Euratom 1 AIA robot – DEVELOPMENT OF AN ITER RELEVANT INSPECTION ROBOT Euratom.
NSTX Upper Divertor Molybdenum Tiles Upper Divertor Molybdenum Tiles (Gerhardt) NSTX-U, Feb. 7-8, 2012 Reminder: Scheme for re-using molybdenum tiles from.

NSTX Upper Divertor Molybdenum Tiles Upper Divertor Molybdenum Tiles (Gerhardt) NSTX-U, Feb. 7-8, 2012 Reminder: Scheme for re-using molybdenum tiles from.
Manufacturing Processes

Manufacturing Processes
Breathing Machine. Design Requirements Provide/Remove 500cc of air Rate ≈ 15 breaths per minute Ability to vary volume of air, and rate Age (years)Weight.

Breathing Machine. Design Requirements Provide/Remove 500cc of air Rate ≈ 15 breaths per minute Ability to vary volume of air, and rate Age (years)Weight.
SER v.3 Sales Presentation Single Ended Recuperative Burner (SER)

SER v.3 Sales Presentation Single Ended Recuperative Burner (SER)
KEY JOBS EXECUTED MACHINING. PA 21 Tubsheet machining Material :- Forge steel Weight:- 27MT, OD:- Ø5300 Operation:- Faces and Groove machining PA 21 Tubsheet.

KEY JOBS EXECUTED MACHINING. PA 21 Tubsheet machining Material :- Forge steel Weight:- 27MT, OD:- Ø5300 Operation:- Faces and Groove machining PA 21 Tubsheet.
Heinz Grote1 Presentation to NSCX WENDELSTEIN 7-X Assembly Max-Planck- Institut für Plasmaphysik KKS-Nr.: 1-AD Dok-Kennz.: -Txxxx.0 Heinz Grote October.

Heinz Grote1 Presentation to NSCX WENDELSTEIN 7-X Assembly Max-Planck- Institut für Plasmaphysik KKS-Nr.: 1-AD Dok-Kennz.: -Txxxx.0 Heinz Grote October.
STATESMAN Campers, Raising the standards. STATESMAN XP- 1.

STATESMAN Campers, Raising the standards. STATESMAN XP- 1.
MERIT Hg System Final Design Review Hg Target System Design Interfaces V.B. Graves P.T. Spampinato T.A. Gabriel MERIT Collaboration Meeting MIT Plasma.

MERIT Hg System Final Design Review Hg Target System Design Interfaces V.B. Graves P.T. Spampinato T.A. Gabriel MERIT Collaboration Meeting MIT Plasma.
Characterization of the Engineering Test Reactor at the INL for Final Disposition TRTR 2007 J. R. Parry Irradiation Test Programs INL.

Characterization of the Engineering Test Reactor at the INL for Final Disposition TRTR 2007 J. R. Parry Irradiation Test Programs INL.
Slope The slope of a line can be thought of as a measure of the steepness of the line. A horizontal line isn’t steep at all, and has a slope of zero.

Slope The slope of a line can be thought of as a measure of the steepness of the line. A horizontal line isn’t steep at all, and has a slope of zero.
Progress on the Configuration Design of the Fusion Power Core for the ACT (Draft) X.R. Wang M.S. Tillack S. Malang Sept. 29, 2011.

Progress on the Configuration Design of the Fusion Power Core for the ACT (Draft) X.R. Wang M.S. Tillack S. Malang Sept. 29, 2011.
Agreement on scope of supply and extent of interface among different suppliers of the AFC module This talk covers the scope of supply on the Absorber Focus.

Agreement on scope of supply and extent of interface among different suppliers of the AFC module This talk covers the scope of supply on the Absorber Focus.
Vacuum Vessel Design Modification and Stress Analysis Neway Atnafu PPPL, NSTX Design Review Meeting September 14, 2011.

Vacuum Vessel Design Modification and Stress Analysis Neway Atnafu PPPL, NSTX Design Review Meeting September 14, 2011.
MICE Meeting at Columbia University June 13, 2003 Implementation of argon gas jacket Edgar L. Black IIT.

MICE Meeting at Columbia University June 13, 2003 Implementation of argon gas jacket Edgar L. Black IIT.
The main function of the divertor is minimizing the helium and impurity content in the plasma as well as exhausting part of the plasma thermal power. The.

The main function of the divertor is minimizing the helium and impurity content in the plasma as well as exhausting part of the plasma thermal power. The.
ARIES-IFE Study L. M. Waganer, June 7, 2000 Page 1 Considerations of HI Beam and Vacuum System Arrangement L. Waganer The Boeing Company 7 June 2001 ARIES.

ARIES-IFE Study L. M. Waganer, June 7, 2000 Page 1 Considerations of HI Beam and Vacuum System Arrangement L. Waganer The Boeing Company 7 June 2001 ARIES.
Technical drawing tools The ruler The graduated ruler is the most common tool used for making straight lines and to measure distances. It has a bevelled.

Technical drawing tools The ruler The graduated ruler is the most common tool used for making straight lines and to measure distances. It has a bevelled.
Blodgett Cafe Series July 2015. Cafe Series Spec Sheets 24” Range 36” Range 48” Range 60” Range 72” Range Radiant STK Infrared STK Banquet Broiler Cheesemelter.

Blodgett Cafe Series July Cafe Series Spec Sheets 24” Range 36” Range 48” Range 60” Range 72” Range Radiant STK Infrared STK Banquet Broiler Cheesemelter.
Welding Joints. T-joint a right-angled joint, esp one in wood, making the shape of the letter T.

Welding Joints. T-joint a right-angled joint, esp one in wood, making the shape of the letter T.

Similar presentations

Ads by Google